{"title":"Aircraft Parts \u0026 Chemicals","description":null,"products":[{"product_id":"avlav-tks-anti-icing-fluid","title":"AvLav TKS Anti-Icing Fluid","description":"\u003cp\u003eAviation Laboratories AVL-TKS is a glycol-based fluid for TKS weeping-wing ice protection systems, made to DTD 406B (AL-5). AvLab specifies it for in-flight de-icing of propellers, wings and tail surfaces fitted with porous distributors, as found on TKS-equipped Diamond, Cirrus, Beechcraft, Cessna, Piper, Mooney, Kodiak and Hawker aircraft. This item is the 1 US gallon size.\u003c\/p\u003e\u003cp\u003eThe fluid is 85 % ethylene glycol, 5 % isopropyl alcohol and 10 % de-ionised water by volume, clear and colourless, with a viscosity of 11–13 mm²\/s at 20 °C, a specific gravity of 1.092–1.097 and a pH of 6.0–7.5. Each blend is tested before and after blending, filtered to 1 micron and supplied with a certificate of analysis under lot control. The SDS classifies it as UN1993, flammable liquid n.o.s., class 3, packing group III for air and sea transport.\u003c\/p\u003e","brand":"Aviation Laboratories","offers":[{"title":"AVL-TKS-1G \/ New","offer_id":58181263294795,"sku":"AVL-TKS-1G","price":1234.4,"currency_code":"CZK","in_stock":true}]},{"product_id":"bendixking-ka-138","title":"BendixKing KA 138 Switching Relay","description":"\u003cp\u003eBendixKing KA 138 is a switching relay box for avionics installations, rated for a 28 V DC supply with a nominal power consumption of 2.85 W. P\/N 071-01251-0000 is the 12-digit form of the earlier P\/N 071-1251-00.\u003c\/p\u003e\u003cp\u003eThe KA 138 is offered new. In a certified aircraft, the unit is installed or replaced according to the approved data for the aircraft, and the work ends with a release to service. Fit depends on the P\/N of the installed unit and the aircraft type.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"071-01251-0000 \/ New","offer_id":58181266473291,"sku":"071-01251-0000","price":217305.33,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/071-01251-0000.jpg?v=1791629809"},{"product_id":"bendixking-ka-33","title":"BendixKing KA 33 Avionics Cooling Blower","description":"\u003cp\u003eBendixKing KA 33 is a cooling blower for panel-mounted avionics stacks of three or more units. It draws air from inside the aircraft and feeds it through flexible ducts to the rear of each unit, so it cools during ground operation as well and works in pressurized and non-pressurized aircraft. BendixKing requires a KA 33 or an equivalent cooling system for a full IFR installation of panel-mounted avionics; ram-air cooling is not accepted.\u003c\/p\u003e\u003cp\u003eP\/N 071-4037-01, in current numbering 071-04037-0001, is the 28 V version with six ports. It draws 0.5 A, delivers a total of 27 ±3 CFM through six ducts and needs a 1 A circuit breaker. It measures 134 × 175 × 102 mm and weighs 0.57 kg. The 14 V six-port version is 071-4037-00, the 28 V two-port version 071-4037-02.\u003c\/p\u003e\u003cp\u003eThe blower is mounted behind the instrument panel on the firewall, the side fuselage or a separate bracket, with the outlets towards the stack, at most 36 in (91 cm) from it and with at least 25 mm free at the air intake. No mounting holes are drilled in a pressurized airframe. P\/N 071-04037-0001 is offered new, 071-4037-01 serviceable\/overhauled. Fit depends on the P\/N and the aircraft type.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"071-04037-0001 \/ New","offer_id":58181266637131,"sku":"071-04037-0001","price":31195.2,"currency_code":"CZK","in_stock":true},{"title":"071-4037-01 \/ Serviceable \/ Overhauled","offer_id":58181266669899,"sku":"071-4037-01-SV","price":0.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/071-04037-0001.jpg?v=1791620123"},{"product_id":"bendixking-ps-578","title":"BendixKing PS-578","description":null,"brand":"BendixKing","offers":[{"title":"071-01618-0125 \/ Repair (RPO)","offer_id":58181330895179,"sku":"071-01618-0125-RPO","price":0.0,"currency_code":"CZK","in_stock":true}]},{"product_id":"garmin-gsb-15","title":"Garmin GSB 15 USB Charging and Database Hub","description":"\u003cp\u003eGarmin GSB 15 is a panel-mounted USB charging and database hub with two charging ports and halo backlighting for night use. It runs on 14 V or 28 V, weighs 70 g and needs no cooling air. It is a TSO-C71 article; Garmin states that the FAA TSO authorization makes it an approved article within the EASA system.\u003c\/p\u003e\u003cp\u003eThe P\/Ns differ in port type and connector position. 010-02201-xx units have two USB Type-A ports with up to 18 W per port. 010-02544-21 and -31 have one Type-A and one Type-C port, 010-02544-41 and -51 two Type-C ports, each with up to 27 W per port. P\/Ns -00, -10, -21 and -41 have a rear connector, -11, -31 and -51 a side connector. The hub can also load software and databases into compatible Garmin units over USB; Garmin lists it as an accessory in the GI 275 STC installation data.\u003c\/p\u003e\u003cp\u003eThe unit mounts from behind the panel in a 25.4 mm (1 in) hole; optional adapter plates fit existing 2.25-inch and 3.125-inch instrument holes. P\/N 010-02201-00 is the unit without connector kit; the other P\/Ns include connector kit 011-05044-00. Installation in a certified aircraft needs separate approval and a Certificate of Release to Service. Fit depends on the P\/N and the aircraft type.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"010-02201-00 \/ New","offer_id":58181410193739,"sku":"010-02201-00","price":7623.65,"currency_code":"CZK","in_stock":true},{"title":"010-02201-10 \/ New","offer_id":58181410226507,"sku":"010-02201-10","price":7116.4,"currency_code":"CZK","in_stock":true},{"title":"010-02201-11 \/ New","offer_id":58181410259275,"sku":"010-02201-11","price":7116.4,"currency_code":"CZK","in_stock":true},{"title":"010-02544-21 \/ New","offer_id":58181410292043,"sku":"010-02544-21","price":9149.4,"currency_code":"CZK","in_stock":true},{"title":"010-02544-31 \/ New","offer_id":58181410324811,"sku":"010-02544-31","price":9149.4,"currency_code":"CZK","in_stock":true},{"title":"010-02544-41 \/ New","offer_id":58181410357579,"sku":"010-02544-41","price":9149.4,"currency_code":"CZK","in_stock":true},{"title":"010-02544-51 \/ New","offer_id":58181410390347,"sku":"010-02544-51","price":9149.4,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/010-02201-00.jpg?v=1790587127"},{"product_id":"klixon-7271-8","title":"Klixon 7271-8-10","description":"\u003cp\u003eSensata Klixon 7271-8 is a single-phase thermal aircraft circuit breaker series with a pushbutton actuator and neck mounting, trip-free, qualified to MIL-C-5809 and rated for 120 V AC 400 Hz or 30 V DC systems. Sensata offers ratings from 3 to 35 A; variant 7271-8-30 is the 30 A breaker, with trip times at 25 °C of 10–70 s at 200 %, 0.75–7 s at 400 % and 0.25–2.5 s at 600 % of rating. The button pops out when the breaker trips.\u003c\/p\u003e\u003cp\u003eA snap-acting Klixon disc element holds its calibration through the service life; the ultimate trip current is 105–145 % of rating at 25 °C. Sensata states 10 g vibration from 50 to 500 Hz, 30 g shock, 5,000 cycles at 120 V AC 400 Hz or 30 V DC inductive load and a maximum weight of 39 g. A certified aircraft needs the breaker installed to approved data and a Certificate of Release to Service. The right version depends on the amperage rating.\u003c\/p\u003e","brand":"Klixon (Sensata)","offers":[{"title":"30 A","offer_id":58181434933579,"sku":"7271-8-30","price":7571.0,"currency_code":"CZK","in_stock":true}]},{"product_id":"klixon-7277-2","title":"Klixon 7277-2-1","description":"\u003cp\u003eSensata Klixon 7277-2 is a series of single-phase thermal circuit breakers without ambient temperature compensation, used extensively as primary electrical circuit protection on general aviation aircraft. The trip-free breakers weigh 28 g maximum. The shop offers the ratings 0.75, 1, 2, 3, 5, 7.5, 10 and 15 A; the rating is the last part of the P\/N, for example 7277-2-5 for 5 A. The 7277 is the commercial grade of the Klixon 7274-2: Sensata states that both are physically and electrically identical, with wider calibration limits on the 7277.\u003c\/p\u003e\u003cp\u003eAt 25 °C the ultimate trip current is 110–150 % of rating, and the trip time is 2–35 s at 200 %, 0.15–1.7 s at 500 % and 0.028–0.55 s at 1000 % of rating. Sensata rates the interrupting capacity as unlimited at 28 V DC up to 5 A and 2,000 A at 28 V DC for 7.5–15 A; at 120 V AC 400 Hz it is unlimited up to 1.5 A, 800 A for 2–5 A and 500 A for 7.5–20 A. Vibration resistance is 10 g from 50 to 500 Hz and shock resistance 35 g.\u003c\/p\u003e\u003cp\u003eA certified aircraft needs the breaker installed to approved data and a Certificate of Release to Service. The right version depends on the amperage rating.\u003c\/p\u003e","brand":"Klixon (Sensata)","offers":[{"title":"1 A","offer_id":58181434966347,"sku":"7277-2-1","price":919.5,"currency_code":"CZK","in_stock":true},{"title":"10 A","offer_id":58181434999115,"sku":"7277-2-10","price":1011.3,"currency_code":"CZK","in_stock":true},{"title":"15 A","offer_id":58181435031883,"sku":"7277-2-15","price":1011.3,"currency_code":"CZK","in_stock":true},{"title":"2 A","offer_id":58181435064651,"sku":"7277-2-2","price":1011.3,"currency_code":"CZK","in_stock":true},{"title":"3 A","offer_id":58181435097419,"sku":"7277-2-3","price":852.8,"currency_code":"CZK","in_stock":true},{"title":"0,75 A","offer_id":58181435130187,"sku":"7277-2-3\/4","price":961.2,"currency_code":"CZK","in_stock":true},{"title":"5 A","offer_id":58181435162955,"sku":"7277-2-5","price":969.6,"currency_code":"CZK","in_stock":true},{"title":"7,5 A","offer_id":58181435195723,"sku":"7277-2-7.5","price":1011.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/7277-2-1.jpg?v=1791629872"},{"product_id":"te-connectivity-w23","title":"TE Connectivity W23-X1A1G Thermal Circuit Breaker","description":"\u003cp\u003eTE Connectivity W23-X1A1G is a single-pole push\/pull thermal circuit breaker from the Potter \u0026amp; Brumfield W23 series, with series trip. The black button carries a white amp marking and a white band that shows when the breaker has tripped. It is available here in 3, 4, 5, 15, 20, 30 and 50 A ratings; the P\/N suffix is the rating. The breaker mounts through a 3\/8-24 threaded bushing in a 9.53–9.80 mm hole, with two hex nuts and a lock washer installed, has two #8-32 screw terminals at 90° to each other and weighs less than 57 g.\u003c\/p\u003e\u003cp\u003eTE specifies a maximum of 50 V DC or 240 V AC (up to 400 Hz). The breaker carries 100 % of its rating continuously and must trip at 135 % within one hour; it is trip-free, cannot be reset against an overload and can also serve as an on\/off switch. Interrupting capacity is 1,000 A at 240 V AC with 4× series fuse protection (30–50 A models also 1,000 A at 50 V DC), and 2,000 A at 50 V DC without it for 0.5–25 A models. The W23 is UL 1077 recognized and CSA accepted as a supplementary protector; a TSO or ETSO is not listed. The right version depends on the current rating.\u003c\/p\u003e","brand":"TE Connectivity","offers":[{"title":"15 A","offer_id":58181500272971,"sku":"W23X1A1G15","price":946.6,"currency_code":"CZK","in_stock":true},{"title":"20 A","offer_id":58181500305739,"sku":"W23X1A1G20","price":917.4,"currency_code":"CZK","in_stock":true},{"title":"3 A","offer_id":58181500338507,"sku":"W23X1A1G3","price":781.9,"currency_code":"CZK","in_stock":true},{"title":"4 A","offer_id":58181500404043,"sku":"W23X1A1G4","price":2183.1,"currency_code":"CZK","in_stock":true},{"title":"5 A","offer_id":58181500436811,"sku":"W23X1A1G5","price":715.2,"currency_code":"CZK","in_stock":true}]},{"product_id":"te-connectivity-w31","title":"TE Connectivity W31","description":null,"brand":"TE Connectivity","offers":[{"title":"1 A","offer_id":58181514363211,"sku":"W31X2M1G1","price":1000.8,"currency_code":"CZK","in_stock":true},{"title":"10 A","offer_id":58181514395979,"sku":"W31X2M1G10","price":1140.5,"currency_code":"CZK","in_stock":true},{"title":"15 A","offer_id":58181514428747,"sku":"W31X2M1G15","price":1303.2,"currency_code":"CZK","in_stock":true},{"title":"2 A","offer_id":58181514461515,"sku":"W31X2M1G2","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"3 A","offer_id":58181514494283,"sku":"W31X2M1G3","price":1432.5,"currency_code":"CZK","in_stock":true},{"title":"5 A","offer_id":58181514527051,"sku":"W31X2M1G5","price":1249.0,"currency_code":"CZK","in_stock":true},{"title":"7,5 A","offer_id":58181514559819,"sku":"W31X2M1G7.5","price":1503.4,"currency_code":"CZK","in_stock":true}]},{"product_id":"te-connectivity-w58","title":"TE Connectivity W58","description":null,"brand":"TE Connectivity","offers":[{"title":"1 A","offer_id":58181515477323,"sku":"W58XC4C12A1","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"15 A","offer_id":58181515510091,"sku":"W58XC4C12A15","price":556.7,"currency_code":"CZK","in_stock":true},{"title":"20 A","offer_id":58181515542859,"sku":"W58XC4C12A20","price":289.8,"currency_code":"CZK","in_stock":true},{"title":"3 A","offer_id":58181515575627,"sku":"W58XC4C12A3","price":567.1,"currency_code":"CZK","in_stock":true},{"title":"5 A","offer_id":58181515608395,"sku":"W58XC4C12A5","price":569.86,"currency_code":"CZK","in_stock":true}]},{"product_id":"whelen-orion-600","title":"Whelen Orion 600 Series Wingtip Light","description":"\u003cp\u003eThe Whelen Orion 600 is a wingtip light that combines the forward position light, the white tail position light and a white anti-collision light in one housing. The forward position light is green or red. The same light is available for 14 V DC and 28 V DC.\u003c\/p\u003e\n\u003cp\u003eWhelen lists TSO\/ETSO-C96a Class II and TSO\/ETSO-C30c Type II and III. The lens is clear hard-coated polycarbonate and can be replaced in the field. The housing measures 144 x 45 x 52 mm and weighs 0.5 lb (about 230 g). Anti-collision lights flash at 45 plus or minus 5 times a minute. A SYNC lead lets Whelen anti-collision lights flash together.\u003c\/p\u003e\n\u003cp\u003eOn 14 V the position lights draw 0.48 A and the anti-collision light draws 1.0 A on average (5.2 A peak). On 28 V the position lights draw 0.17 A and the anti-collision light draws 0.5 A on average (2.6 A peak), from a 22 to 32 V supply. Part numbers are 01-0771733-01 (green, 14 V), 01-0771733-02 (red, 14 V), 01-0771733-11 (green, 28 V) and 01-0771733-12 (red, 28 V). A forward position system uses one light on each wingtip. On a certified aircraft the installation needs approved data.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Green \/ 14V","offer_id":58181517640011,"sku":"01-0771733-01","price":15531.9,"currency_code":"CZK","in_stock":true},{"title":"Red \/ 14V","offer_id":58853524341067,"sku":"01-0771733-02","price":15531.9,"currency_code":"CZK","in_stock":true},{"title":"Green \/ 28V","offer_id":58853609963851,"sku":"01-0771733-11","price":15531.9,"currency_code":"CZK","in_stock":true},{"title":"Red \/ 28V","offer_id":58853610062155,"sku":"01-0771733-12","price":15531.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771733-01.jpg?v=1790591558"},{"product_id":"aeroleds-00-8120","title":"AeroLEDs 00-8120 Synchronizer Circuit","description":"\u003cp\u003eAeroLEDs 00-8120 — synchronizer circuit. It is an installation component for synchronising supported AeroLEDs lighting circuits. Part number 00-8120; type: synchronizer circuit; compatibility: supported AeroLEDs lights per installation manual.\u003c\/p\u003e\u003cp\u003eConfirm the exact part number, intended installation, aircraft approval and current manufacturer instructions before ordering.\u003c\/p\u003e\u003cp\u003eOne AeroLEDs synchronizer P\/N 00-8120; no other equipment is included.\u003c\/p\u003e","brand":"AeroLEDS","offers":[{"title":"Default Title","offer_id":58181563580747,"sku":"00-8120","price":700.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/aeroleds-00-8120-cropped.png?v=1790512301"},{"product_id":"a442","title":"Whelen A442 AMP 3-Position Female Connector Kit","description":"\u003cp\u003eWhelen A442, P\/N 01-0410823-00, is a replacement connector kit for cables with a 3-position AMP female connector and sockets. Whelen Aerospace Technologies lists it among its aircraft replacement connector kits, next to the 3-position male kit A441 (01-0430011-00), the 2- and 4-position kits A444, A446, A447 and A448 and the CRIMPAV crimp tool. Whelen lists no STC for the kit.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181622661451,"sku":"01-0410823-00","price":594.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0410823-00.jpg?v=1790591506"},{"product_id":"a441","title":"Whelen A441 AMP 3-Position Male Connector Kit","description":"\u003cp\u003eWhelen A441, P\/N 01-0430011-00, is a replacement connector kit for cables with a 3-position AMP male connector and pins. Whelen Aerospace Technologies lists it among its aircraft replacement connector kits, next to the 3-position female kit A442 (01-0410823-00), the 2- and 4-position kits A444, A446, A447 and A448 and the CRIMPAV crimp tool. Whelen lists no STC for the kit.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181622825291,"sku":"01-0430011-00","price":563.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0430011-00.jpg?v=1791620112"},{"product_id":"crimpav","title":"Whelen CRIMPAV AMP Crimp Tool","description":"\u003cp\u003eWhelen CRIMPAV, P\/N 01-0515361-00, is a crimp tool for AMP pin and socket contacts. Whelen Aerospace Technologies lists it together with its aircraft replacement connector kits A441, A442, A444, A446, A447 and A448, which contain 2-, 3- and 4-position AMP connectors with pins or sockets.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181622890827,"sku":"01-0515361-00","price":6206.82,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/012-01-0515361-00.jpg?v=1791814359"},{"product_id":"hdacf","title":"Whelen HDACF Strobe Power Supply, 3 Outlets, 14\/28 V","description":"\u003cp\u003eWhelen HDACF (P\/N 01-0770028-05, A413AHDACF-14\/28V) is a remote strobe power supply for up to three strobe lightheads in 14 V or 28 V DC aircraft. Whelen gives an operating range of 10–30 V DC; it draws 7.0 A at 14 V and 3.5 A at 28 V, weighs 953 g and measures 140 × 127 × 60 mm. Whelen holds an FAA PMA for this P\/N.\u003c\/p\u003e\u003cp\u003eTwo lights receive 42 joules each when flashing alternately and 21 joules each when flashing together. With three lights, outlet 1 delivers 42 joules and alternates with outlets 2 and 3, which flash together at 21 joules each. A jumper on the trigger plug sets the alternating pattern; a switch in series with the jumper turns off outlets 2 and 3 while outlet 1 stays on. Whelen specifies a distance of at least 3 ft from the ADF loop.\u003c\/p\u003e\u003cp\u003eEASA STC 10052976 (aeroplanes) and 10053536 (rotorcraft), both based on FAA STC SA615EA, cover Whelen P\/N 01-0770028-( ) as a replacement for the originally installed anti-collision lights on the types in their approved model lists (manual 05131 Rev. E, placard A421). After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the strobe lighthead models.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181623021899,"sku":"01-0770028-05","price":19549.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0770028-05.jpg?v=1790591235"},{"product_id":"a469b","title":"Whelen A469B Flash Tube Assembly","description":"\u003cp\u003eWhelen A469B (P\/N 01-0770044-02) is a replacement flash tube assembly for Whelen strobe lights. Whelen lists it in the parts breakdowns of the A470A series remote strobe lighthead, the HRCFA self-contained anti-collision strobe and the 70285 series self-contained strobe. Related versions are the A469A (01-0770044-00) with a non-reflective base and the radio-shielded A469D (01-0770044-01).\u003c\/p\u003e\u003cp\u003eLens, clamp ring, gaskets and power supply are separate items in the Whelen parts lists, and the replacement follows Whelen manual 05131 Rev. E. After the tube is replaced, the aircraft is released to service with a Certificate of Release to Service. Fit depends on the model of the installed light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181623218507,"sku":"01-0770044-02","price":5113.71,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0770044-02.jpg?v=1791629876"},{"product_id":"a625","title":"Whelen A625 Strobe Light Assembly, White","description":"\u003cp\u003eWhelen A625 (P\/N 01-0770058-03) is a white strobe lighthead with a clear lens, the standard version of the A625 series without radio shielding, for installation in a 1.1 in (28 mm) hole. It is driven by a remote Whelen strobe power supply, which also sets its input current. The assembly weighs 0.2 lb (91 g) and protrudes 1.7 in (43 mm) outside the skin and 1.1 in (28 mm) inside; the mounting screws are 1.75 in (44 mm) apart.\u003c\/p\u003e\u003cp\u003eWhelen lists the A625 for tip-tank aircraft with enclosed position lights, as an add-on strobe on the wing or the tail, and behind the forward position light on Cessna conical-camber wingtips. The lead, about 5.5 in long, carries anode (red), cathode (black) and trigger (white). Other versions are A625R with red lens (-04), A625D with radio shielding (-13) and A625DR with radio shielding and red lens (-14).\u003c\/p\u003e\u003cp\u003eWhelen holds an FAA PMA for the -03 under FAA STC SA800EA, which lists P\/N 01-0770058-( ). EASA STC 10055068 (GA aeroplanes) and EASA STC 10056206 (rotorcraft) validate SA800EA for the types in their approved model lists; installation follows Whelen manual 05131. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type, the mounting location and the strobe power supply model.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181623447883,"sku":"01-0770058-03","price":6661.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0770058-03.jpg?v=1790591251"},{"product_id":"a490atsc","title":"Whelen A490ATSC Strobe Power Supply, 14\/28 V","description":"\u003cp\u003eWhelen A490ATSC (P\/N 01-0770062-03, A490ATSCF-14\/28) is a remote strobe power supply for 14 V and 28 V DC aircraft that drives one strobe lighthead at 34 joules. It accepts 13–30 V DC, draws 4.0 A at 14 V and 2.0 A at 28 V, weighs 771 g and measures 127 × 79 × 78 mm. Whelen holds an FAA PMA for this P\/N.\u003c\/p\u003e\u003cp\u003eThe output connector carries anode, cathode and trigger; the input connector carries power, ground and a sync pin. An 18-gauge wire between the sync pins synchronises up to five other like units. A built-in circuit prevents steady glowing of the strobe tubes; when an older supply is replaced, the harness shield is grounded at the power-supply end only. Whelen specifies at least 3 ft from the ADF loop and a drain hole in the cover for inverted mounting.\u003c\/p\u003e\u003cp\u003eEASA STC 10052976 (aeroplanes) and 10053536 (rotorcraft), both based on FAA STC SA615EA, cover Whelen P\/N 01-0770062-( ) as a replacement for the originally installed anti-collision lights on the types in their approved model lists (manual 05131 Rev. E, placard A421). After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the strobe lighthead model.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181623480651,"sku":"01-0770062-03","price":18259.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0770062-03.jpg?v=1790591269"},{"product_id":"7030320","title":"Whelen 7030320 LED Wingtip Recognition Light, 01-0770303-20, 28 V","description":"\u003ch2\u003eWhelen Aerospace 7030320\u003c\/h2\u003e\u003cp\u003eWhelen Aerospace 7030320 LED wingtip recognition light, P\/N 01-0770303-20, a 28 V PMA direct replacement for specified legacy Mooney halogen lights. Part number: 01-0770303-20.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWhelen Aerospace 7030320 LED wingtip recognition light, P\/N 01-0770303-20, a 28 V PMA direct replacement for specified legacy Mooney halogen lights.\u003c\/li\u003e\n\u003cli\u003eExact identity: Whelen Aerospace 7030320\u003c\/li\u003e\n\u003cli\u003ePart number: 01-0770303-20\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eWhelen Aerospace 7030320 — Part number 01-0770303-20.\u003c\/p\u003e\u003ch3\u003ePurpose and selection\u003c\/h3\u003e\u003cp\u003eWhelen Aerospace 7030320 LED wingtip recognition light, P\/N 01-0770303-20, a 28 V PMA direct replacement for specified legacy Mooney halogen lights.\u003c\/p\u003e\u003ch3\u003eCompatibility and installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, variant, parent equipment or approved application before ordering.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181623677259,"sku":"01-0770303-20","price":6305.34,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0770303-20.jpg?v=1790591346"},{"product_id":"7034601","title":"Whelen 7034601 Recognition\/Landing Light, 28 V, without Lens","description":"\u003cp\u003eWhelen 7034601 (P\/N 01-0770346-01) is a 28 V DC recognition and landing light assembly of the 70346 series, supplied without a lens. Whelen rates the 70346 assembly at up to 80,000 beam candlepower with a 35 W lamp; at 28 V it draws 1.25 A. The housing measures 108 × 76 × 74 mm (width × height × depth) and weighs 0.16 lb (73 g) without a lens.\u003c\/p\u003e\u003cp\u003eWhelen offers the 70346 series without a lens for custom applications, with a clear lens for a spot beam and with an optic spreader lens for taxiing. The 28 V versions are 7034601 (no lens), 7034603 (clear lens) and 7034605 (clear optic lens); the 14 V versions 7034600, 7034602 and 7034604 draw 2.5 A.\u003c\/p\u003e\u003cp\u003eWhelen lists FAA PMA for 7034601 and no STC. A certified aircraft needs approved data for the installation and a Certificate of Release to Service. Fit depends on the aircraft type and the P\/N of the light being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181623775563,"sku":"01-0770346-01","price":2737.7,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0770346-01.jpg?v=1792264731"},{"product_id":"7034604","title":"Whelen 7034604 Recognition\/Landing Light, 14 V, Clear Optic Lens","description":"\u003cp\u003eWhelen 7034604 (P\/N 01-0770346-04) is a 14 V DC recognition and landing light assembly of the 70346 series with a clear optic lens, the spreader lens Whelen specifies for taxiing. Whelen rates the 70346 assembly at up to 80,000 beam candlepower with a 35 W lamp; at 14 V it draws 2.5 A. The housing measures 108 × 76 × 74 mm (width × height × depth) and weighs 0.28 lb (127 g) with the lens.\u003c\/p\u003e\u003cp\u003eWhelen offers the 70346 series without a lens for custom applications, with a clear lens for a spot beam and with an optic spreader lens for taxiing. The 14 V versions are 7034600 (no lens), 7034602 (clear lens) and 7034604 (clear optic lens); the 28 V versions 7034601, 7034603 and 7034605 draw 1.25 A.\u003c\/p\u003e\u003cp\u003eWhelen lists FAA PMA for 7034604 and no STC. A certified aircraft needs approved data for the installation and a Certificate of Release to Service. Fit depends on the aircraft type and the P\/N of the light being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181630525771,"sku":"01-0770346-04","price":2518.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0770346-04.jpg?v=1790591365"},{"product_id":"7054400","title":"Whelen 7054400 Ground Crew Call Horn for Boeing","description":"\u003cp\u003eWhelen Aerospace Technologies 7054400 (P\/N 01-0770544-00) is a ground crew call horn that Whelen lists for Boeing aircraft. It draws 55 mA (typical) at 28 V DC, measures 3.56 in (90 mm) in diameter and 2.28 in (58 mm) in height, and weighs 0.65 lb (295 g). Whelen lists FAA-PMA approval for the horn, drawing number 70544.\u003c\/p\u003e\u003cp\u003eThe horn is replaced according to the aircraft maintenance data, and the work is certified with a Certificate of Release to Service. Fit depends on the aircraft type and the P\/N of the installed horn.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181638259019,"sku":"01-0770544-00","price":31472.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0770544-00.jpg?v=1790591381"},{"product_id":"w1555ah2","title":"Whelen W1555AH2","description":"\u003cp\u003eWhelen 01-0770551-03 is a dual tail light for 28 V systems in horizontal mounting. Parts listings name it a tail position light head assembly, horizontal, 28 V.\u003c\/p\u003e\u003cp\u003eA certified aircraft needs approved data for the installation and a Certificate of Release to Service. Fit depends on the aircraft type and the light being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181641077067,"sku":"01-0770551-03","price":2502.1,"currency_code":"CZK","in_stock":true}]},{"product_id":"7111003","title":"Whelen 7111003 Green Wingtip LED Position\/Strobe Light, 28 V","description":"\u003cp\u003eWhelen 7111003 (P\/N 01-0771110-03) is a green 28 V DC wingtip light of the 71110 series that combines an LED forward position light with a strobe tube in an RFI-shielded unit. Whelen lists TSO-C30c Type II and TSO-C96a Class II. The position light has 3 green LEDs and draws 0.25 A; the light weighs 0.50 lb (227 g) and has an exposed height of 2.70 in (69 mm).\u003c\/p\u003e\u003cp\u003eThe strobe tube connects through the 3-pin J1 connector (anode, cathode, trigger) to a separate strobe power supply. The strobe lens is RFI-coated clear glass, the position light lens clear polycarbonate. The light is fixed with three #6-32 screws, and a lighting system uses two lights, one on each wingtip. The green 14 V version is 7111001, the red 28 V version 7111004. Whelen cross-references 7111003 to the Orion 650E LED model OR6502GE (01-0790701-11).\u003c\/p\u003e\u003cp\u003eA certified aircraft needs an approved modification or approved data for the installation and a Certificate of Release to Service. Fit depends on the aircraft type, the existing wingtip lights and the strobe power supply.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181650547019,"sku":"01-0771110-03","price":16226.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771110-03.jpg?v=1791721289"},{"product_id":"7112520","title":"Whelen 7112520 LED Recognition Light, 10°, 28 V","description":"\u003cp\u003eWhelen 7112520 (P\/N 01-0771125-20) is a white LED recognition light of the 71125 series in a 2 × 3 in housing for 28 V DC, with a 10° beam. It draws 0.45 A, weighs 0.3 lb (136 g) and measures 83 × 32 × 50 mm (width × depth × height) with a clear polycarbonate lens.\u003c\/p\u003e\u003cp\u003eThe 28 V versions of the series differ in beam: 10° (7112520), 20° (7112521), 30° (7112523) and 90° (7112522), plus the Hoist versions 7112550 (20°) and 7112551 (90°). The lens kit 01-0418045-00 changes this light to 20°, 30° or 90° optics. Whelen no longer recommends the 71125 series and cross-references 7112520 to the 72170-series light 01-0772170-01 for 14–28 V DC in the same 83 × 32 × 50 mm envelope.\u003c\/p\u003e\u003cp\u003eWhelen lists no TSO approval for the 71125 series. A certified aircraft needs approved data for the installation and a Certificate of Release to Service. Fit depends on the aircraft type and the light being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181650579787,"sku":"01-0771125-20","price":7506.36,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771125-20.jpg?v=1790591470"},{"product_id":"or5001v","title":"Whelen OR5001V","description":"\u003cp\u003eWhelen Orion 500 OR5001V (P\/N 01-0771774V01) is a 14 V DC LED tail light that combines the white tail position light and a white anti-collision light in one housing. Whelen lists TSO-C96a Class II (Class II and III in the installation guide) and TSO-C30c Type III, plus ETSO in its model table. The position light draws 0.2 A, the anti-collision light 0.72 A on average and 3.8 A peak, at 45 ± 5 flashes per minute.\u003c\/p\u003e\u003cp\u003eThe tail position light has 4 LEDs and the anti-collision light 18 LEDs; if any LED fails, the unit is repaired or replaced. Four 20 AWG leads carry the anti-collision supply (red), position supply (orange), SYNC (yellow) and ground (black); SYNC lets Whelen LED anti-collision lights flash together. Whelen cross-references OR5001V to the earlier A500AV14 (01-0770024-00) and A555AV14 (01-0770034-00); some earlier installations need an extra wire for the anti-collision function.\u003c\/p\u003e\u003cp\u003eIt is mounted as far aft as practicable on a thermally conductive surface. FAA STC SA800EA names P\/N 01-0771774-( ). Whelen lists EASA STC 10055068, the EASA validation of SA800EA for GA aeroplanes on its approved model list; EASA STC 10056206 Rev. 1 names 01-0771774-( ) for rotorcraft. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the existing tail light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181684298059,"sku":"01-0771774V01","price":11270.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771774V01.jpg?v=1790591664"},{"product_id":"or5002v","title":"Whelen OR5002V","description":"\u003cp\u003eWhelen Orion 500 OR5002V (P\/N 01-0771774V02) is a 28 V DC LED tail light that combines the white tail position light and a white anti-collision light in one housing. Whelen lists TSO-C96a Class II (Class II and III in the installation guide) and TSO-C30c Type III, plus ETSO in its model table. The position light draws 0.1 A, the anti-collision light 0.36 A on average and 1.9 A peak, at 45 ± 5 flashes per minute.\u003c\/p\u003e\u003cp\u003eThe tail position light has 4 LEDs and the anti-collision light 18 LEDs; if any LED fails, the unit is repaired or replaced. Four 20 AWG leads carry the anti-collision supply (red), position supply (orange), SYNC (yellow) and ground (black); SYNC lets Whelen LED anti-collision lights flash together. Whelen cross-references OR5002V to the earlier A500AV28 (01-0770024-01) and A555AV28 (01-0770034-01); some earlier installations need an extra wire for the anti-collision function.\u003c\/p\u003e\u003cp\u003eIt is mounted as far aft as practicable on a thermally conductive surface. For the EU, Whelen lists two EASA validations of FAA STC SA800EA: EASA STC 10055068 for GA aeroplanes on the EASA approved model list, and EASA STC 10056206 Rev. 1 for rotorcraft, which names P\/N 01-0771774-( ). The FAA STC on its own is not an EU approval. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the existing tail light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181684887883,"sku":"01-0771774V02","price":11270.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771774V02.jpg?v=1790591690"},{"product_id":"p36p1l","title":"Whelen P36P1L","description":"\u003cp\u003eWhelen Parmetheus Plus P36P1L (P\/N 01-0771833-10) is a 14 V DC PAR36 LED landing light that replaces a PAR36 halogen lamp in the existing housing. It has a 10° spot beam with 60,000 cd, draws 1.36 A and weighs 0.52 lb (236 g); the light measures 111 × 111 × 43 mm.\u003c\/p\u003e\u003cp\u003ePower wiring attaches to two brass screw terminals; the ground terminal is isolated from the case, and reversed polarity does not damage the unit. An alignment key orients the beam in the housing, and a rubber gasket is supplied for housings that need it. The hard-coated polycarbonate outer lens (68-3971486A30) is replaceable; the light itself is not repairable. Whelen cross-references the P36P1L to GE lamps 4416, 4509, 4595, Q4631 and Q4632, states compatibility with all pulse light modules and lists the Parmetheus G3 01-0772102-10 as the newer model.\u003c\/p\u003e\u003cp\u003eEASA STC 10055632 Rev. 1 (aeroplanes), based on FAA STC SA00344BO, and EASA STC 10055724 (rotorcraft), based on FAA STC SR00359BO, cover the installation of Parmetheus Plus PAR36 lights on the types approved by EASA in the respective FAA approved model lists. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the lamp being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181684920651,"sku":"01-0771833-10","price":7459.45,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771833-10.jpg?v=1790591725"},{"product_id":"p36p2l","title":"Whelen P36P2L","description":"\u003cp\u003eWhelen Parmetheus Plus P36P2L (P\/N 01-0771833-20) is a PAR36 LED landing light for 28 V DC aircraft that replaces an incandescent PAR36 lamp in the existing holder. Whelen lists a 10° spot beam of 60,000 cd, a current of 0.68 A at 28 V and a weight of 0.52 lb (236 g); the light measures 111 × 111 × 43 mm.\u003c\/p\u003e\u003cp\u003eThe light connects to the existing wiring, switch and circuit breaker through polarity-marked screw terminals; reversed polarity does not damage it. A key on the assembly engages the key of the housing, and Whelen states compatibility with all pulse light modules. Whelen cross-references GE lamps 4505, 4591, 4594, 4596, Q4591 and Q5596 to this P\/N; the 14 V version is P36P1L. The clear lens 68-3971486A30 is replaceable; the light itself is not repairable. Whelen names the Parmetheus G3 P36G3L (01-0772102-10) as the newer replacement.\u003c\/p\u003e\u003cp\u003eEASA STC 10055632 (aeroplanes, validation of FAA STC SA00344BO) and EASA STC 10055724 (rotorcraft, validation of FAA STC SR00359BO) cover the installation of Parmetheus Plus PAR36 lights on the types EASA has approved from the respective FAA approved model list; maintenance follows Whelen document 14793. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the lamp being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181684953419,"sku":"01-0771833-20","price":6465.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771833-20.jpg?v=1790591743"},{"product_id":"p36p2t","title":"Whelen P36P2T","description":"\u003cp\u003eWhelen Parmetheus Plus P36P2T (P\/N 01-0771833-25) is a PAR36 LED taxi light for 28 V DC aircraft that replaces an incandescent PAR36 lamp in the existing holder. Whelen lists a 40° spreader optic of 15,000 cd, a current of 0.68 A at 28 V and a weight of 0.52 lb (236 g); the light measures 111 × 111 × 43 mm.\u003c\/p\u003e\u003cp\u003eThe light connects to the existing wiring, switch and circuit breaker through polarity-marked screw terminals; reversed polarity does not damage it. A key on the assembly engages the key of the housing, and Whelen states compatibility with all pulse light modules. Whelen cross-references GE lamps 4587, 4593, 4623, 4626, 4627 and Q5587 to this P\/N; the 14 V version is P36P1T. The clear lens 68-3971486A30 is replaceable; the light itself is not repairable. Whelen names the Parmetheus G3 P36G3T (01-0772102-15) as the newer replacement.\u003c\/p\u003e\u003cp\u003eEASA STC 10055632 (aeroplanes, validation of FAA STC SA00344BO) and EASA STC 10055724 (rotorcraft, validation of FAA STC SR00359BO) cover the installation of Parmetheus Plus PAR36 lights on the types EASA has approved from the respective FAA approved model list; maintenance follows Whelen document 14793. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the lamp being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181684986187,"sku":"01-0771833-25","price":6465.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771833-25.jpg?v=1790591762"},{"product_id":"whelen-chroma-position-lamp","title":"Whelen Chroma LED Position Lamp","description":"\u003cp\u003eThe Whelen Chroma is a green or red LED lamp for wingtip forward position lights, approved to TSO-C30c (Type I red, Type II green). It replaces an incandescent lamp in the existing lamp socket behind the original lens of the light assembly. The lamp is 2.05 in (52 mm) high and 1.23 in (31 mm) wide and weighs about 1 oz (28 g). Current draw is 0.28 A at 14 V DC and 0.13 A at 28 V DC.\u003c\/p\u003e\u003cp\u003eWhelen lists the Chroma lamps as drop-in replacements for the incandescent lamps 1290( ), W1290( ), A7512( ), 628 and W628. The series covers CHROMA1G (green) and CHROMA1R (red) for 14 V and CHROMA2G and CHROMA2R for 28 V. Whelen rates the LED life at 10,000 hours.\u003c\/p\u003e\u003cp\u003eFAA STC SA800EA covers the Chroma lamps; for rotorcraft, EASA STC 10056206 validates it. A certified aircraft needs approved data for the installation and a Certificate of Release to Service.\u003c\/p\u003e\u003ch3\u003eVersions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGreen, 14 V – P\/N 01-0771900G14\u003c\/li\u003e\n\u003cli\u003eRed, 14 V – P\/N 01-0771900R14\u003c\/li\u003e\n\u003cli\u003eGreen, 28 V – P\/N 01-0771900G28\u003c\/li\u003e\n\u003cli\u003eRed, 28 V – P\/N 01-0771900R28\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Red \/ 14 V","offer_id":58867420496203,"sku":"01-0771900R14","price":3776.64,"currency_code":"CZK","in_stock":true},{"title":"Red \/ 28 V","offer_id":58181685576011,"sku":"01-0771900R28","price":3776.64,"currency_code":"CZK","in_stock":true},{"title":"Green \/ 14 V","offer_id":58867420889419,"sku":"01-0771900G14","price":3776.64,"currency_code":"CZK","in_stock":true},{"title":"Green \/ 28 V","offer_id":58867421348171,"sku":"01-0771900G28","price":3776.64,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771900R28.jpg?v=1790591852"},{"product_id":"7198517","title":"Whelen 7198517 LED Anti-Collision Flasher Assembly, 28 V","description":"\u003cp\u003eWhelen 7198517 (P\/N 01-0771985-17) is the flasher assembly that drives a Whelen 7198700 white LED wingtip anti-collision light, approved to TSO-C96a Class III. It runs on 28 V DC (21–32 V DC), draws 0.3 A on average with 1.7 A pulses and produces 45 ± 5 flash bursts per minute. It weighs 0.48 lb (218 g) and measures 100 × 79 × 35 mm.\u003c\/p\u003e\u003cp\u003ePower enters through a 7 in input cable (white +28 V, black ground with #10 ring terminal); the light connects to the 2 × 2 Mini Universal Mate-N-Lok output. The flasher must not be connected to a xenon strobe light. An approved system uses two flashers and two 7198700 lights, one pair per wingtip.\u003c\/p\u003e\u003cp\u003eWhelen holds an FAA PMA for 01-0771985-17 as a replacement for the Whelen strobe power supply 01-0770006-17 on the Cessna 172R, 172S, 182S, 182T, T182T, 206H and T206H. Replacing the 7000617 power supply or the 7081800 strobe light needs both the 7198517 and the 7198700. For an EASA-registered aircraft, acceptance of the PMA part for the type is confirmed before installation, and the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft model, the serial number and the strobe parts being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685608779,"sku":"01-0771985-17","price":8303.91,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771985-17.jpg?v=1790591872"},{"product_id":"7198700","title":"Whelen 7198700 White LED Wingtip Anti-Collision Light","description":"\u003cp\u003eWhelen 7198700 (P\/N 01-0771987-00) is a white LED anti-collision light for wingtip mounting, approved to TSO-C96a Class III. Three banks of seven LEDs are covered by a clear hard-coated lens; the light measures 81 × 36 × 30 mm and weighs 0.14 lb (64 g).\u003c\/p\u003e\u003cp\u003eEach light is driven by its own Whelen 7198517 flasher assembly on 28 V DC and connects to it through 14 in 20 AWG leads with a 2 × 2 Mini Universal Mate-N-Lok connector. It must not be connected to a xenon strobe power supply. An approved system uses two lights, one on each wingtip. If more than one LED per bank or a whole bank fails, the flasher is checked first, then the light is replaced.\u003c\/p\u003e\u003cp\u003eWhelen holds an FAA PMA for 01-0771987-00 as a replacement for the Whelen strobe light 01-0770818-00 on the Cessna 172R, 172S, 182S, 182T, T182T, 206H and T206H. Replacing the 7081800 strobe light or the 7000617 power supply needs both the 7198700 and the 7198517. For an EASA-registered aircraft, acceptance of the PMA part for the type is confirmed before installation, and the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft model, the serial number and the strobe parts being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685674315,"sku":"01-0771987-00","price":8619.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771987-00.jpg?v=1790591900"},{"product_id":"or36r2n","title":"Whelen OR36R2N","description":"\u003cp\u003eWhelen Orion 360 OR36R2N (P\/N 01-0772010-10) is a red LED anti-collision beacon for 28 V DC with a 2.6 in (66 mm) upper base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.26 A on average and 1.4 A peak, and weighs 0.3 lb (about 136 g).\u003c\/p\u003e\u003cp\u003eThe light has 20 red LEDs and is 1.60 in (41 mm) high. Two 18 AWG leads to MIL-W-22759\/34, 12 in long, carry +28 V DC (white) and ground (black). The light assembly is secured with Allen screws to a mounting adapter; Whelen gives hole patterns with four #6-32 holes on a 1.625 in or 1.250 in bolt circle. The red 3.67 in (93 mm) versions are OR36R2W (upper) and OR36R2WL (lower); the 14 V red version with the 2.6 in base is OR36R1N.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685707083,"sku":"01-0772010-10","price":14474.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-10.jpg?v=1791618490"},{"product_id":"or36r2w","title":"Whelen OR36R2W","description":"\u003cp\u003eWhelen Orion 360 OR36R2W (P\/N 01-0772010-12) is a red LED anti-collision beacon for 28 V DC, upper mount, with a 3.67 in (93 mm) base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.26 A on average and 1.4 A peak, and weighs 0.37 lb (about 168 g).\u003c\/p\u003e\u003cp\u003eThe light has 20 red LEDs and is 2.83 in (72 mm) high; the Whelen model table lists this size as the 3.75 in base. Two 18 AWG leads to MIL-W-22759\/34, 10 in long, carry +28 V DC (white) and ground (black). Whelen gives a suggested pattern of three #6-32 mounting holes. The lower-mount version is OR36R2WL, the 14 V version is OR36R1W and the version with the 2.6 in (66 mm) base is OR36R2N.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685772619,"sku":"01-0772010-12","price":15248.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-12.jpg?v=1790591918"},{"product_id":"or36r2wl","title":"Whelen OR36R2WL","description":"\u003cp\u003eWhelen Orion 360 OR36R2WL (P\/N 01-0772010-13) is a red LED anti-collision beacon for 28 V DC, lower mount, with a 3.67 in (93 mm) base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.26 A on average and 1.4 A peak, and weighs 0.37 lb (about 168 g).\u003c\/p\u003e\u003cp\u003eThe light has 20 red LEDs and is 2.83 in (72 mm) high; the Whelen model table lists this size as the 3.75 in base. Two 18 AWG leads to MIL-W-22759\/34, 10 in long, carry +28 V DC (white) and ground (black). Whelen gives a suggested pattern of three #6-32 mounting holes; the lower-mount version has a cap with a drain hole. The upper-mount version is OR36R2W; the white lower-mount version is OR36W2WL.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685870923,"sku":"01-0772010-13","price":15248.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-13.jpg?v=1790591935"},{"product_id":"or36w2wl","title":"Whelen OR36W2WL","description":"\u003cp\u003eWhelen Orion 360 OR36W2WL (P\/N 01-0772010-23) is a white LED anti-collision beacon for 28 V DC, lower mount, with a 3.67 in (93 mm) base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.26 A on average and 1.4 A peak, and weighs 0.37 lb (about 168 g).\u003c\/p\u003e\u003cp\u003eThe light has 16 white LEDs and is 2.83 in (72 mm) high; the Whelen model table lists this size as the 3.75 in base. Two 18 AWG leads to MIL-W-22759\/34, 10 in long, carry +28 V DC (white) and ground (black). Whelen gives a suggested pattern of three #6-32 mounting holes; the lower-mount version has a cap with a drain hole. The white upper-mount version is OR36W2W; the red lower-mount version is OR36R2WL.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685903691,"sku":"01-0772010-23","price":15248.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-23.jpg?v=1790591940"},{"product_id":"or36r1n","title":"Whelen OR36R1N","description":"\u003cp\u003eWhelen Orion 360 OR36R1N (P\/N 01-0772010-50) is a red LED anti-collision beacon for 14 V DC with a 2.6 in (66 mm) upper base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.53 A on average and 2.8 A peak, and weighs 0.3 lb (about 136 g).\u003c\/p\u003e\u003cp\u003eThe light has 20 red LEDs and is 1.60 in (41 mm) high. Two 18 AWG leads to MIL-W-22759\/34, 12 in long, carry +14 V DC (red) and ground (black). Whelen gives mounting patterns with four #6-32 holes on a 1.625 in bolt circle or two #6-32 or #8-32 holes on a 1.250 in bolt circle. The 28 V version with the same base is OR36R2N, the 14 V version with the 3.67 in (93 mm) base OR36R1W.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685936459,"sku":"01-0772010-50","price":14474.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-50.jpg?v=1790591962"},{"product_id":"or36r1w","title":"Whelen OR36R1W","description":"\u003cp\u003eWhelen Orion 360 OR36R1W (P\/N 01-0772010-52) is a red LED anti-collision beacon for 14 V DC, upper mount, with a 3.67 in (93 mm) base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.53 A on average and 2.8 A peak, and weighs 0.37 lb (about 168 g).\u003c\/p\u003e\u003cp\u003eThe light has 20 red LEDs and is 2.83 in (72 mm) high; the Whelen model table lists this size as the 3.75 in base. Two 18 AWG leads to MIL-W-22759\/34, 10 in long, carry +14 V DC (red) and ground (black). Whelen gives a suggested pattern of three #6-32 mounting holes. The 28 V version with the same base is OR36R2W; the 14 V red version with the 2.6 in (66 mm) base is OR36R1N.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181686133067,"sku":"01-0772010-52","price":15248.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-52.jpg?v=1790591985"},{"product_id":"or5501v","title":"Whelen OR5501V","description":"\u003cp\u003eWhelen Orion 550 OR5501V (P\/N 01-0772070V01) is a 14 V DC LED tail light that combines the white tail position light and a white anti-collision light in one compact housing. Whelen lists TSO-C96a Class II and III and TSO-C30c Type III. The position light draws 0.2 A, the anti-collision light 0.72 A on average and 3.8 A peak, at 45 ± 5 flashes per minute; the installation guide gives a 10–14 V DC operating range.\u003c\/p\u003e\u003cp\u003eThe tail position light has 4 LEDs and the anti-collision light 18 LEDs; if any LED fails, the unit is repaired or replaced. The housing measures 48 × 44 × 55 mm and weighs 0.20 lb (about 90 g). A SYNC lead lets Whelen LED anti-collision lights flash together. Whelen cross-references OR5501V to the earlier A500AV14 and A555AV14; replacing an A555AV14 position light needs an additional 12\/14 V DC wire for the anti-collision function.\u003c\/p\u003e\u003cp\u003eThe light is mounted as far aft as practicable on a thermally conductive surface, drain hole down. Whelen lists no STC for the Orion 550. A certified aircraft needs an approved modification or approved data for the installation and a Certificate of Release to Service. Fit depends on the aircraft type and the existing tail light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181686296907,"sku":"01-0772070V01","price":10978.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772070V01.jpg?v=1790592003"},{"product_id":"p36g3l","title":"Whelen P36G3L","description":"\u003cp\u003eWhelen Parmetheus G3 P36G3L (P\/N 01-0772102-10) is a PAR36 LED landing light for 14 V and 28 V DC aircraft that replaces an incandescent PAR36 lamp in the existing holder. Whelen lists 136,273 cd peak intensity in a 12° × 12° beam, a current of 3.8 A at 14 V or 1.9 A at 28 V and a weight of 0.8 lb (363 g).\u003c\/p\u003e\u003cp\u003eThe light connects to the existing wiring, switch and circuit breaker through polarity-marked screw terminals; reversed polarity does not damage it. A rubber gasket is included for housings that need one, and Whelen states compatibility with all pulse light modules. Whelen cross-references GE lamps 4313, 4416, 4505, 4509, 4591, 4594, 4595, 4596, Q4591, Q4631, Q4632 and Q5596 and the Parmetheus Plus landing lights P36P1L and P36P2L to this P\/N; the taxi light version is P36G3T (01-0772102-15). The light is not repairable and its lens is not replaceable.\u003c\/p\u003e\u003cp\u003eEASA STC 10055632, the validation of FAA STC SA00344BO, covers the installation of Parmetheus G3 PAR36 lights on the aeroplane types EASA has approved from FAA AML 140212 Rev. 7, with maintenance per Whelen document 14E25. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the lamp being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181686329675,"sku":"01-0772102-10","price":7291.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772102-10.jpg?v=1790592020"},{"product_id":"p36g3t","title":"Whelen P36G3T","description":"\u003cp\u003eWhelen Parmetheus G3 P36G3T (P\/N 01-0772102-15) is a PAR36 LED taxi light for 14 V and 28 V DC aircraft that replaces an incandescent PAR36 lamp in the existing holder. Whelen lists 35,000 cd peak intensity in a 15° × 50° beam, a current of 3.8 A at 14 V or 1.9 A at 28 V and a weight of 0.8 lb (363 g).\u003c\/p\u003e\u003cp\u003eThe light connects to the existing wiring, switch and circuit breaker through polarity-marked screw terminals; reversed polarity does not damage it. A rubber gasket is included for housings that need one, and Whelen states compatibility with all pulse light modules. Whelen cross-references GE lamps 4587, 4589, 4593, 4623, 4626, 4627 and Q5587 and the Parmetheus Plus taxi lights P36P1T and P36P2T to this P\/N; the landing light version is P36G3L (01-0772102-10). The light is not repairable and its lens is not replaceable.\u003c\/p\u003e\u003cp\u003eEASA STC 10055632, the validation of FAA STC SA00344BO, covers the installation of Parmetheus G3 PAR36 lights on the aeroplane types EASA has approved from FAA AML 140212 Rev. 7, with maintenance per Whelen document 14E25. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the lamp being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181686362443,"sku":"01-0772102-15","price":7291.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772102-15.jpg?v=1790592037"},{"product_id":"parmetheus-duo","title":"Whelen Parmetheus DUO P36DUO PAR 36 LED Landing\/Taxi Light","description":"\u003cp\u003eWhelen Parmetheus DUO P36DUO (P\/N 01-0772131-00) is a PAR 36 LED light with separate landing and taxi sections and a wig-wag input in one lamp, for 11–32 V DC. At 14 V the landing section draws 3.50 A and the taxi section 4.15 A; at 28 V they draw 1.55 A and 1.80 A. The light weighs 0.85 lb (0.39 kg).\u003c\/p\u003e\u003cp\u003eSix leads connect the landing section (white), taxi section (red), ground (black), wig-wag (green), master\/slave (orange) and synchronisation (yellow). An alignment key on the light matches the key of the PAR 36 housing so that the beam is oriented correctly. A rubber gasket is supplied with the light, and the clear lens can be replaced (68-3971486A30); the unit itself is not repairable.\u003c\/p\u003e\u003cp\u003eThe Whelen installation guide lists no TSO, STC or PMA for the P36DUO, and Aircraft Spruce lists it as not FAA approved. An installation on a certified aircraft therefore needs its own approval and a Certificate of Release to Service. Fit depends on the aircraft type and the existing landing and taxi lights.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181686395211,"sku":"01-0772131-00","price":10490.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772131-00.jpg?v=1791629879"},{"product_id":"9052001","title":"Whelen 9052001 Red\/White LED Anti-Collision Beacon, 28 V","description":"\u003cp\u003eWhelen 9052001 (P\/N 01-0790520-01) is a red\/white LED anti-collision beacon of the 90520 series for 28 V DC with a 2.6 in (66 mm) A470A mount, approved to TSO-C96a Class III. It draws 0.45 A on average and 2.0 A peak for 0.3 s, weighs 0.65 lb (about 295 g), has an exposed height of 3.74 in (95 mm) and meets the anti-collision light requirement of 14 CFR 91.205(c)(3).\u003c\/p\u003e\u003cp\u003eThe split lighthead has 4 columns of 4 red LEDs, installed facing forward, and 4 columns of 3 white LEDs; if any one LED or column fails, the unit is repaired or replaced. Flying leads, 18 AWG and 12 in long, carry +28 V DC (white) and ground (black). The 14 V version with the same mount is 9052051.\u003c\/p\u003e\u003cp\u003eEASA STC 10052976, the EASA validation of FAA STC SA615EA, covers Whelen P\/N 01-0790520-( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, installed per Whelen manual 05131 Rev. E with placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon mount.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181687312715,"sku":"01-0790520-01","price":15561.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0790520-01.jpg?v=1790592150"},{"product_id":"9052018","title":"Whelen 9052018 Red\/White LED Anti-Collision Beacon, Lower Mount, 28 V","description":"\u003cp\u003eWhelen 9052018 (P\/N 01-0790520-18) is a 90520-series red\/white LED anti-collision beacon for lower fuselage mounting on 28 V DC aircraft, approved to TSO-C96a Class III. It draws 0.45 A on average with 2.0 A pulses and weighs 0.8 lb (363 g). Four columns of four red LEDs and four columns of three white LEDs sit under a clear polycarbonate lens, with the red LEDs facing forward.\u003c\/p\u003e\u003cp\u003ePower is connected through an MS3102R10SL-3P connector (pin A +28 V DC, pin C ground). The light fits the 5-hole pattern on a 4.656 in (118 mm) bolt circle used by the Whelen 70285, 7090501 and 70900 beacons with the A440 adapter. A lower-mounted unit needs the flasher base waterproofed to the aircraft. If any LED or LED column fails, the unit is repaired or replaced; Whelen specifies an annual inspection.\u003c\/p\u003e\u003cp\u003eEASA STC 10052976 (aeroplanes) and 10053536 (rotorcraft), both based on FAA STC SA615EA, cover Whelen P\/N 01-0790520-( ) as a replacement for the originally installed anti-collision lights on the types in their approved model lists (manual 05131 Rev. E, placard A421). After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the beacon being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181687345483,"sku":"01-0790520-18","price":17084.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0790520-18.jpg?v=1791620169"},{"product_id":"9052051","title":"Whelen 9052051 Red\/White LED Anti-Collision Beacon, 14 V","description":"\u003cp\u003eWhelen 9052051 (P\/N 01-0790520-51) is a red\/white LED anti-collision beacon of the 90520 series for 14 V DC with a 2.6 in (66 mm) A470A mount, approved to TSO-C96a Class III. It draws 0.90 A on average and 4.0 A peak for 0.3 s, weighs 0.65 lb (about 295 g), has an exposed height of 3.74 in (95 mm) and meets the anti-collision light requirement of 14 CFR 91.205(c)(3).\u003c\/p\u003e\u003cp\u003eThe split lighthead has 4 columns of 4 red LEDs, installed facing forward, and 4 columns of 3 white LEDs; if any one LED or column fails, the unit is repaired or replaced. Power enters through an AMP 1-480319-0 (Mate-N-Lock) connector on 5.5 in, 20 AWG leads: pin 1 +14 V DC (red), pin 2 ground (black). The 28 V version with the same mount is 9052001.\u003c\/p\u003e\u003cp\u003eEASA STC 10052976, the EASA validation of FAA STC SA615EA, covers Whelen P\/N 01-0790520-( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, installed per Whelen manual 05131 Rev. E with placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon mount.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181687542091,"sku":"01-0790520-51","price":15561.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0790520-51.jpg?v=1790592167"},{"product_id":"9072414","title":"Whelen 9072414 LED Anti-Collision Beacon, Rudder Mount","description":"\u003cp\u003eWhelen Aerospace Technologies 9072414 (P\/N 01-0790724-14) is a red LED anti-collision beacon for a 5-hole rudder mount, the 90724-series version that Whelen lists for Baron aircraft. It runs on 28 V DC (22–32 V DC), draws 0.3 A on average with 1.6 A pulses, flashes at 45 ± 5 flashes per minute and is approved to FAA TSO-C96a Class III. The assembly weighs 2.25 lb (1.02 kg).\u003c\/p\u003e\u003cp\u003eThe light source is six vertical columns of six LEDs under a clear lens. The 90724 series replaces the Whelen 90044 quartz-halogen flashing beacons; Whelen cross-references this version to 01-0790044-57 and 01-0790088-14. Power is connected through an 18 in (457 mm) shielded two-conductor cable pigtail. The unit measures 9.88 × 2.38 × 2.70 in (251 × 60 × 69 mm).\u003c\/p\u003e\u003cp\u003eIf any one LED fails, the unit must be repaired or replaced; Whelen specifies an annual inspection unless the aircraft manufacturer sets a shorter interval. Whelen states that the TSO article needs separate approval for installation; on an EASA-registered aircraft that means approved data for the type and a Certificate of Release to Service after installation. Fit depends on the aircraft type and the P\/N of the beacon being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181687771467,"sku":"01-0790724-14","price":30494.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0790724-14.jpg?v=1790588204"},{"product_id":"p46g3l","title":"Whelen P46G3L","description":"\u003cp\u003eWhelen Parmetheus G3 P46G3L (P\/N 01-0790906-00) is a PAR 46 LED landing light that replaces a PAR 46 lamp in the existing holder and runs on 14 V or 28 V DC. Whelen gives a peak intensity of 228,044 cd with a 16° × 16° beam; the light draws 6.0 A at 14 V and 2.8 A at 28 V (nominal) and weighs 1.5 lb (0.68 kg).\u003c\/p\u003e\u003cp\u003eWhelen cross-references the P46G3L to GE lamps 4413, 4421, 4435, 4522 and 4537 (14 V) and 4551, 4553, 4554, Q4554, Q4566, 4570, 4571, 4580, 4581, Q4597 and Q4681 (28 V). The existing wires go to the positive and negative terminals; reversed polarity does not damage the light, and the ground terminal is isolated from the case. A rubber gasket is supplied with the light, which is installed with the vent membrane at the top. The lens is not replaceable and the unit is not repairable.\u003c\/p\u003e\u003cp\u003eFAA STC SA00344BO and FAA PMA cover the Parmetheus G3 PAR 46 on fixed-wing aircraft. EASA STC 10055632 Rev. 1 validates SA00344BO for the types on FAA AML 140212 Rev. 7 that EASA has approved. After installation the landing light characteristics are checked and the aircraft is released to service. Fit depends on the aircraft type and the lamp being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181689213259,"sku":"01-0790906-00","price":10707.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0790906-00.jpg?v=1790592252"},{"product_id":"sunspot-36-4313-h","title":"AeroLEDs SunSpot 36-4313-H LED Landing Light with Pulse, 01-1030-4313-H","description":"\u003cp\u003eAeroLEDs SunSpot 36-4313-H, P\/N 01-1030-4313-H, is an LED landing light with integrated pulse (wigwag) for 14 V DC aircraft that fits a standard PAR36 mount. It belongs to the SunSpot 36-4000 100 W series and delivers a peak intensity of 200,000 cd in a 20° × 20° beam (at 10 % of peak).\u003c\/p\u003e\u003cp\u003eThe light runs on 9–15 V DC and draws 6.8 A in steady or pulse mode. The pulse function is built in and needs no external controller; it uses an additional yellow wire and a switch or switch position. With two or four lights, the blue and green wires synchronise them; lights within two feet of each other need the AeroLEDs 00-8120 sync circuit. The version without pulse is 01-1030-4313; the 28 V version with pulse is 01-1030-4596-H.\u003c\/p\u003e\u003cp\u003eAeroLEDs holds FAA PMA for the light, and the SunSpot series is approved under FAA STC SA02386AK. For aircraft types on that AML that EASA has approved, EASA STC 10070175 is the approval path. The installation checks the electrical load, keeps at least 4 in (102 mm) clearance from exhaust components and aims the light per the aircraft maintenance manual. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the lamp being replaced.\u003c\/p\u003e","brand":"AeroLEDS","offers":[{"title":"Default Title","offer_id":58181689246027,"sku":"01-1030-4313-H","price":16951.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-1030-4313-H.jpg?v=1790591128"}],"url":"https:\/\/shop.airteam.eu\/collections\/aircraft-parts-chemicals.oembed?page=7","provider":"AIR TEAM","version":"1.0","type":"link"}