{"title":"Piper PA-18 Super Cub Parts","description":"\u003cp\u003eThis collection lists parts for the Piper PA-18 Super Cub: Whelen and AeroLEDs lighting, APS brake linings, Champion and Tempest oil filters, Tempest dry air pumps, Curtis fuel drain valves, McFarlane controls and wheel seals and EarthX lithium batteries.\u003c\/p\u003e\u003cp\u003eEach product page lists the eligible models and serial-number ranges. Check fit against your aircraft's model and S\/N before ordering.\u003c\/p\u003e","products":[{"product_id":"or5001v","title":"Whelen OR5001V","description":"\u003cp\u003eWhelen Orion 500 OR5001V (P\/N 01-0771774V01) is a 14 V DC LED tail light that combines the white tail position light and a white anti-collision light in one housing. Whelen lists TSO-C96a Class II (Class II and III in the installation guide) and TSO-C30c Type III, plus ETSO in its model table. The position light draws 0.2 A, the anti-collision light 0.72 A on average and 3.8 A peak, at 45 ± 5 flashes per minute.\u003c\/p\u003e\u003cp\u003eThe tail position light has 4 LEDs and the anti-collision light 18 LEDs; if any LED fails, the unit is repaired or replaced. Four 20 AWG leads carry the anti-collision supply (red), position supply (orange), SYNC (yellow) and ground (black); SYNC lets Whelen LED anti-collision lights flash together. Whelen cross-references OR5001V to the earlier A500AV14 (01-0770024-00) and A555AV14 (01-0770034-00); some earlier installations need an extra wire for the anti-collision function.\u003c\/p\u003e\u003cp\u003eIt is mounted as far aft as practicable on a thermally conductive surface. FAA STC SA800EA names P\/N 01-0771774-( ). Whelen lists EASA STC 10055068, the EASA validation of SA800EA for GA aeroplanes on its approved model list; EASA STC 10056206 Rev. 1 names 01-0771774-( ) for rotorcraft. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the existing tail light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181684298059,"sku":"01-0771774V01","price":11270.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771774V01.jpg?v=1790591664"},{"product_id":"or5002v","title":"Whelen OR5002V","description":"\u003cp\u003eWhelen Orion 500 OR5002V (P\/N 01-0771774V02) is a 28 V DC LED tail light that combines the white tail position light and a white anti-collision light in one housing. Whelen lists TSO-C96a Class II (Class II and III in the installation guide) and TSO-C30c Type III, plus ETSO in its model table. The position light draws 0.1 A, the anti-collision light 0.36 A on average and 1.9 A peak, at 45 ± 5 flashes per minute.\u003c\/p\u003e\u003cp\u003eThe tail position light has 4 LEDs and the anti-collision light 18 LEDs; if any LED fails, the unit is repaired or replaced. Four 20 AWG leads carry the anti-collision supply (red), position supply (orange), SYNC (yellow) and ground (black); SYNC lets Whelen LED anti-collision lights flash together. Whelen cross-references OR5002V to the earlier A500AV28 (01-0770024-01) and A555AV28 (01-0770034-01); some earlier installations need an extra wire for the anti-collision function.\u003c\/p\u003e\u003cp\u003eIt is mounted as far aft as practicable on a thermally conductive surface. For the EU, Whelen lists two EASA validations of FAA STC SA800EA: EASA STC 10055068 for GA aeroplanes on the EASA approved model list, and EASA STC 10056206 Rev. 1 for rotorcraft, which names P\/N 01-0771774-( ). The FAA STC on its own is not an EU approval. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the existing tail light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181684887883,"sku":"01-0771774V02","price":11270.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771774V02.jpg?v=1790591690"},{"product_id":"p36p1l","title":"Whelen P36P1L","description":"\u003cp\u003eWhelen Parmetheus Plus P36P1L (P\/N 01-0771833-10) is a 14 V DC PAR36 LED landing light that replaces a PAR36 halogen lamp in the existing housing. It has a 10° spot beam with 60,000 cd, draws 1.36 A and weighs 0.52 lb (236 g); the light measures 111 × 111 × 43 mm.\u003c\/p\u003e\u003cp\u003ePower wiring attaches to two brass screw terminals; the ground terminal is isolated from the case, and reversed polarity does not damage the unit. An alignment key orients the beam in the housing, and a rubber gasket is supplied for housings that need it. The hard-coated polycarbonate outer lens (68-3971486A30) is replaceable; the light itself is not repairable. Whelen cross-references the P36P1L to GE lamps 4416, 4509, 4595, Q4631 and Q4632, states compatibility with all pulse light modules and lists the Parmetheus G3 01-0772102-10 as the newer model.\u003c\/p\u003e\u003cp\u003eEASA STC 10055632 Rev. 1 (aeroplanes), based on FAA STC SA00344BO, and EASA STC 10055724 (rotorcraft), based on FAA STC SR00359BO, cover the installation of Parmetheus Plus PAR36 lights on the types approved by EASA in the respective FAA approved model lists. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the lamp being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181684920651,"sku":"01-0771833-10","price":7459.45,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771833-10.jpg?v=1790591725"},{"product_id":"p36p2l","title":"Whelen P36P2L","description":"\u003cp\u003eWhelen Parmetheus Plus P36P2L (P\/N 01-0771833-20) is a PAR36 LED landing light for 28 V DC aircraft that replaces an incandescent PAR36 lamp in the existing holder. Whelen lists a 10° spot beam of 60,000 cd, a current of 0.68 A at 28 V and a weight of 0.52 lb (236 g); the light measures 111 × 111 × 43 mm.\u003c\/p\u003e\u003cp\u003eThe light connects to the existing wiring, switch and circuit breaker through polarity-marked screw terminals; reversed polarity does not damage it. A key on the assembly engages the key of the housing, and Whelen states compatibility with all pulse light modules. Whelen cross-references GE lamps 4505, 4591, 4594, 4596, Q4591 and Q5596 to this P\/N; the 14 V version is P36P1L. The clear lens 68-3971486A30 is replaceable; the light itself is not repairable. Whelen names the Parmetheus G3 P36G3L (01-0772102-10) as the newer replacement.\u003c\/p\u003e\u003cp\u003eEASA STC 10055632 (aeroplanes, validation of FAA STC SA00344BO) and EASA STC 10055724 (rotorcraft, validation of FAA STC SR00359BO) cover the installation of Parmetheus Plus PAR36 lights on the types EASA has approved from the respective FAA approved model list; maintenance follows Whelen document 14793. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the lamp being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181684953419,"sku":"01-0771833-20","price":6465.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771833-20.jpg?v=1790591743"},{"product_id":"p36p2t","title":"Whelen P36P2T","description":"\u003cp\u003eWhelen Parmetheus Plus P36P2T (P\/N 01-0771833-25) is a PAR36 LED taxi light for 28 V DC aircraft that replaces an incandescent PAR36 lamp in the existing holder. Whelen lists a 40° spreader optic of 15,000 cd, a current of 0.68 A at 28 V and a weight of 0.52 lb (236 g); the light measures 111 × 111 × 43 mm.\u003c\/p\u003e\u003cp\u003eThe light connects to the existing wiring, switch and circuit breaker through polarity-marked screw terminals; reversed polarity does not damage it. A key on the assembly engages the key of the housing, and Whelen states compatibility with all pulse light modules. Whelen cross-references GE lamps 4587, 4593, 4623, 4626, 4627 and Q5587 to this P\/N; the 14 V version is P36P1T. The clear lens 68-3971486A30 is replaceable; the light itself is not repairable. Whelen names the Parmetheus G3 P36G3T (01-0772102-15) as the newer replacement.\u003c\/p\u003e\u003cp\u003eEASA STC 10055632 (aeroplanes, validation of FAA STC SA00344BO) and EASA STC 10055724 (rotorcraft, validation of FAA STC SR00359BO) cover the installation of Parmetheus Plus PAR36 lights on the types EASA has approved from the respective FAA approved model list; maintenance follows Whelen document 14793. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the lamp being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181684986187,"sku":"01-0771833-25","price":6465.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771833-25.jpg?v=1790591762"},{"product_id":"whelen-chroma-position-lamp","title":"Whelen Chroma LED Position Lamp","description":"\u003cp\u003eThe Whelen Chroma is a green or red LED lamp for wingtip forward position lights, approved to TSO-C30c (Type I red, Type II green). It replaces an incandescent lamp in the existing lamp socket behind the original lens of the light assembly. The lamp is 2.05 in (52 mm) high and 1.23 in (31 mm) wide and weighs about 1 oz (28 g). Current draw is 0.28 A at 14 V DC and 0.13 A at 28 V DC.\u003c\/p\u003e\u003cp\u003eWhelen lists the Chroma lamps as drop-in replacements for the incandescent lamps 1290( ), W1290( ), A7512( ), 628 and W628. The series covers CHROMA1G (green) and CHROMA1R (red) for 14 V and CHROMA2G and CHROMA2R for 28 V. Whelen rates the LED life at 10,000 hours.\u003c\/p\u003e\u003cp\u003eFAA STC SA800EA covers the Chroma lamps; for rotorcraft, EASA STC 10056206 validates it. A certified aircraft needs approved data for the installation and a Certificate of Release to Service.\u003c\/p\u003e\u003ch3\u003eVersions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGreen, 14 V – P\/N 01-0771900G14\u003c\/li\u003e\n\u003cli\u003eRed, 14 V – P\/N 01-0771900R14\u003c\/li\u003e\n\u003cli\u003eGreen, 28 V – P\/N 01-0771900G28\u003c\/li\u003e\n\u003cli\u003eRed, 28 V – P\/N 01-0771900R28\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Red \/ 14 V","offer_id":58867420496203,"sku":"01-0771900R14","price":3776.64,"currency_code":"CZK","in_stock":true},{"title":"Red \/ 28 V","offer_id":58181685576011,"sku":"01-0771900R28","price":3776.64,"currency_code":"CZK","in_stock":true},{"title":"Green \/ 14 V","offer_id":58867420889419,"sku":"01-0771900G14","price":3776.64,"currency_code":"CZK","in_stock":true},{"title":"Green \/ 28 V","offer_id":58867421348171,"sku":"01-0771900G28","price":3776.64,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771900R28.jpg?v=1790591852"},{"product_id":"or36r2w","title":"Whelen OR36R2W","description":"\u003cp\u003eWhelen Orion 360 OR36R2W (P\/N 01-0772010-12) is a red LED anti-collision beacon for 28 V DC, upper mount, with a 3.67 in (93 mm) base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.26 A on average and 1.4 A peak, and weighs 0.37 lb (about 168 g).\u003c\/p\u003e\u003cp\u003eThe light has 20 red LEDs and is 2.83 in (72 mm) high; the Whelen model table lists this size as the 3.75 in base. Two 18 AWG leads to MIL-W-22759\/34, 10 in long, carry +28 V DC (white) and ground (black). Whelen gives a suggested pattern of three #6-32 mounting holes. The lower-mount version is OR36R2WL, the 14 V version is OR36R1W and the version with the 2.6 in (66 mm) base is OR36R2N.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685772619,"sku":"01-0772010-12","price":15248.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-12.jpg?v=1790591918"},{"product_id":"or36r2wl","title":"Whelen OR36R2WL","description":"\u003cp\u003eWhelen Orion 360 OR36R2WL (P\/N 01-0772010-13) is a red LED anti-collision beacon for 28 V DC, lower mount, with a 3.67 in (93 mm) base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.26 A on average and 1.4 A peak, and weighs 0.37 lb (about 168 g).\u003c\/p\u003e\u003cp\u003eThe light has 20 red LEDs and is 2.83 in (72 mm) high; the Whelen model table lists this size as the 3.75 in base. Two 18 AWG leads to MIL-W-22759\/34, 10 in long, carry +28 V DC (white) and ground (black). Whelen gives a suggested pattern of three #6-32 mounting holes; the lower-mount version has a cap with a drain hole. The upper-mount version is OR36R2W; the white lower-mount version is OR36W2WL.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685870923,"sku":"01-0772010-13","price":15248.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-13.jpg?v=1790591935"},{"product_id":"or36w2wl","title":"Whelen OR36W2WL","description":"\u003cp\u003eWhelen Orion 360 OR36W2WL (P\/N 01-0772010-23) is a white LED anti-collision beacon for 28 V DC, lower mount, with a 3.67 in (93 mm) base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.26 A on average and 1.4 A peak, and weighs 0.37 lb (about 168 g).\u003c\/p\u003e\u003cp\u003eThe light has 16 white LEDs and is 2.83 in (72 mm) high; the Whelen model table lists this size as the 3.75 in base. Two 18 AWG leads to MIL-W-22759\/34, 10 in long, carry +28 V DC (white) and ground (black). Whelen gives a suggested pattern of three #6-32 mounting holes; the lower-mount version has a cap with a drain hole. The white upper-mount version is OR36W2W; the red lower-mount version is OR36R2WL.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685903691,"sku":"01-0772010-23","price":15248.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-23.jpg?v=1790591940"},{"product_id":"or36r1n","title":"Whelen OR36R1N","description":"\u003cp\u003eWhelen Orion 360 OR36R1N (P\/N 01-0772010-50) is a red LED anti-collision beacon for 14 V DC with a 2.6 in (66 mm) upper base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.53 A on average and 2.8 A peak, and weighs 0.3 lb (about 136 g).\u003c\/p\u003e\u003cp\u003eThe light has 20 red LEDs and is 1.60 in (41 mm) high. Two 18 AWG leads to MIL-W-22759\/34, 12 in long, carry +14 V DC (red) and ground (black). Whelen gives mounting patterns with four #6-32 holes on a 1.625 in bolt circle or two #6-32 or #8-32 holes on a 1.250 in bolt circle. The 28 V version with the same base is OR36R2N, the 14 V version with the 3.67 in (93 mm) base OR36R1W.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685936459,"sku":"01-0772010-50","price":14474.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-50.jpg?v=1790591962"},{"product_id":"or36r1w","title":"Whelen OR36R1W","description":"\u003cp\u003eWhelen Orion 360 OR36R1W (P\/N 01-0772010-52) is a red LED anti-collision beacon for 14 V DC, upper mount, with a 3.67 in (93 mm) base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.53 A on average and 2.8 A peak, and weighs 0.37 lb (about 168 g).\u003c\/p\u003e\u003cp\u003eThe light has 20 red LEDs and is 2.83 in (72 mm) high; the Whelen model table lists this size as the 3.75 in base. Two 18 AWG leads to MIL-W-22759\/34, 10 in long, carry +14 V DC (red) and ground (black). Whelen gives a suggested pattern of three #6-32 mounting holes. The 28 V version with the same base is OR36R2W; the 14 V red version with the 2.6 in (66 mm) base is OR36R1N.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181686133067,"sku":"01-0772010-52","price":15248.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-52.jpg?v=1790591985"},{"product_id":"p36g3l","title":"Whelen P36G3L","description":"\u003cp\u003eWhelen Parmetheus G3 P36G3L (P\/N 01-0772102-10) is a PAR36 LED landing light for 14 V and 28 V DC aircraft that replaces an incandescent PAR36 lamp in the existing holder. Whelen lists 136,273 cd peak intensity in a 12° × 12° beam, a current of 3.8 A at 14 V or 1.9 A at 28 V and a weight of 0.8 lb (363 g).\u003c\/p\u003e\u003cp\u003eThe light connects to the existing wiring, switch and circuit breaker through polarity-marked screw terminals; reversed polarity does not damage it. A rubber gasket is included for housings that need one, and Whelen states compatibility with all pulse light modules. Whelen cross-references GE lamps 4313, 4416, 4505, 4509, 4591, 4594, 4595, 4596, Q4591, Q4631, Q4632 and Q5596 and the Parmetheus Plus landing lights P36P1L and P36P2L to this P\/N; the taxi light version is P36G3T (01-0772102-15). The light is not repairable and its lens is not replaceable.\u003c\/p\u003e\u003cp\u003eEASA STC 10055632, the validation of FAA STC SA00344BO, covers the installation of Parmetheus G3 PAR36 lights on the aeroplane types EASA has approved from FAA AML 140212 Rev. 7, with maintenance per Whelen document 14E25. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the lamp being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181686329675,"sku":"01-0772102-10","price":7291.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772102-10.jpg?v=1790592020"},{"product_id":"p36g3t","title":"Whelen P36G3T","description":"\u003cp\u003eWhelen Parmetheus G3 P36G3T (P\/N 01-0772102-15) is a PAR36 LED taxi light for 14 V and 28 V DC aircraft that replaces an incandescent PAR36 lamp in the existing holder. Whelen lists 35,000 cd peak intensity in a 15° × 50° beam, a current of 3.8 A at 14 V or 1.9 A at 28 V and a weight of 0.8 lb (363 g).\u003c\/p\u003e\u003cp\u003eThe light connects to the existing wiring, switch and circuit breaker through polarity-marked screw terminals; reversed polarity does not damage it. A rubber gasket is included for housings that need one, and Whelen states compatibility with all pulse light modules. Whelen cross-references GE lamps 4587, 4589, 4593, 4623, 4626, 4627 and Q5587 and the Parmetheus Plus taxi lights P36P1T and P36P2T to this P\/N; the landing light version is P36G3L (01-0772102-10). The light is not repairable and its lens is not replaceable.\u003c\/p\u003e\u003cp\u003eEASA STC 10055632, the validation of FAA STC SA00344BO, covers the installation of Parmetheus G3 PAR36 lights on the aeroplane types EASA has approved from FAA AML 140212 Rev. 7, with maintenance per Whelen document 14E25. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the lamp being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181686362443,"sku":"01-0772102-15","price":7291.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772102-15.jpg?v=1790592037"},{"product_id":"9052001","title":"Whelen 9052001 Red\/White LED Anti-Collision Beacon, 28 V","description":"\u003cp\u003eWhelen 9052001 (P\/N 01-0790520-01) is a red\/white LED anti-collision beacon of the 90520 series for 28 V DC with a 2.6 in (66 mm) A470A mount, approved to TSO-C96a Class III. It draws 0.45 A on average and 2.0 A peak for 0.3 s, weighs 0.65 lb (about 295 g), has an exposed height of 3.74 in (95 mm) and meets the anti-collision light requirement of 14 CFR 91.205(c)(3).\u003c\/p\u003e\u003cp\u003eThe split lighthead has 4 columns of 4 red LEDs, installed facing forward, and 4 columns of 3 white LEDs; if any one LED or column fails, the unit is repaired or replaced. Flying leads, 18 AWG and 12 in long, carry +28 V DC (white) and ground (black). The 14 V version with the same mount is 9052051.\u003c\/p\u003e\u003cp\u003eEASA STC 10052976, the EASA validation of FAA STC SA615EA, covers Whelen P\/N 01-0790520-( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, installed per Whelen manual 05131 Rev. E with placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon mount.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181687312715,"sku":"01-0790520-01","price":15561.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0790520-01.jpg?v=1790592150"},{"product_id":"9052018","title":"Whelen 9052018 Red\/White LED Anti-Collision Beacon, Lower Mount, 28 V","description":"\u003cp\u003eWhelen 9052018 (P\/N 01-0790520-18) is a 90520-series red\/white LED anti-collision beacon for lower fuselage mounting on 28 V DC aircraft, approved to TSO-C96a Class III. It draws 0.45 A on average with 2.0 A pulses and weighs 0.8 lb (363 g). Four columns of four red LEDs and four columns of three white LEDs sit under a clear polycarbonate lens, with the red LEDs facing forward.\u003c\/p\u003e\u003cp\u003ePower is connected through an MS3102R10SL-3P connector (pin A +28 V DC, pin C ground). The light fits the 5-hole pattern on a 4.656 in (118 mm) bolt circle used by the Whelen 70285, 7090501 and 70900 beacons with the A440 adapter. A lower-mounted unit needs the flasher base waterproofed to the aircraft. If any LED or LED column fails, the unit is repaired or replaced; Whelen specifies an annual inspection.\u003c\/p\u003e\u003cp\u003eEASA STC 10052976 (aeroplanes) and 10053536 (rotorcraft), both based on FAA STC SA615EA, cover Whelen P\/N 01-0790520-( ) as a replacement for the originally installed anti-collision lights on the types in their approved model lists (manual 05131 Rev. E, placard A421). After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the beacon being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181687345483,"sku":"01-0790520-18","price":17084.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0790520-18.jpg?v=1791620169"},{"product_id":"9052051","title":"Whelen 9052051 Red\/White LED Anti-Collision Beacon, 14 V","description":"\u003cp\u003eWhelen 9052051 (P\/N 01-0790520-51) is a red\/white LED anti-collision beacon of the 90520 series for 14 V DC with a 2.6 in (66 mm) A470A mount, approved to TSO-C96a Class III. It draws 0.90 A on average and 4.0 A peak for 0.3 s, weighs 0.65 lb (about 295 g), has an exposed height of 3.74 in (95 mm) and meets the anti-collision light requirement of 14 CFR 91.205(c)(3).\u003c\/p\u003e\u003cp\u003eThe split lighthead has 4 columns of 4 red LEDs, installed facing forward, and 4 columns of 3 white LEDs; if any one LED or column fails, the unit is repaired or replaced. Power enters through an AMP 1-480319-0 (Mate-N-Lock) connector on 5.5 in, 20 AWG leads: pin 1 +14 V DC (red), pin 2 ground (black). The 28 V version with the same mount is 9052001.\u003c\/p\u003e\u003cp\u003eEASA STC 10052976, the EASA validation of FAA STC SA615EA, covers Whelen P\/N 01-0790520-( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, installed per Whelen manual 05131 Rev. E with placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon mount.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181687542091,"sku":"01-0790520-51","price":15561.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0790520-51.jpg?v=1790592167"},{"product_id":"aero-classics-8000074","title":"Aero-Classics 8000074 Remote-Mount Oil Cooler, 9 Plate","description":"\u003ch2\u003eAero-Classics 8000074\u003c\/h2\u003e\u003cp\u003eAero-Classics 8000074 is a remote-mounted nine-row oil cooler, approved as a replacement for specified Niagara and Harrison units on listed aircraft. Part number: 8000074.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAero-Classics 8000074 is a remote-mounted nine-row oil cooler, approved as a replacement for specified Niagara and Harrison units on listed aircraft.\u003c\/li\u003e\n\u003cli\u003eExact identity: Aero-Classics 8000074\u003c\/li\u003e\n\u003cli\u003ePart number: 8000074\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eAero-Classics 8000074 — Part number 8000074.\u003c\/p\u003e\u003ch3\u003ePurpose and compatibility\u003c\/h3\u003e\u003cp\u003eAero-Classics 8000074 is a remote-mounted nine-row oil cooler, approved as a replacement for specified Niagara and Harrison units on listed aircraft.\u003c\/p\u003e","brand":"Aero-Classics","offers":[{"title":"Default Title","offer_id":58183768932683,"sku":"8000074","price":15033.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/aero-classics-8000074.jpg?v=1790583540"},{"product_id":"aa3215cc","title":"Tempest AA3215CC Tornado Dry Air Pump","description":"\u003cp\u003eTempest AA3215CC is a new Tornado engine-driven dry air pump with FAA-PMA approval. Tempest's application table lists it for a wide range of piston singles and twins, including Cessna 172 and 172RG serial ranges, Piper PA-18 Super Cub, PA-22 and PA-24 Comanche, Beechcraft Musketeer, Sundowner and Sierra, and Aviat A1C Husky.\u003c\/p\u003e\u003cp\u003eThe pump has Tempest's Wear Indicator Port (WIP) for internal inspection of the vanes, and Tempest service letter SL-003 sets the replacement time of the AA3215CC by the WIP reading. A closed front end and the LRT oil drain keep engine oil out of the pump, the stator is finned for cooling, and through-bolts hold constant body torque and alignment.\u003c\/p\u003e\u003cp\u003eThe correct pump depends on the aircraft serial number and engine: for some Cessna 172 and F172 serial ranges Tempest specifies the AA3215CC-9 instead. Tempest lists the overhauled 215CC series for the same applications. Installation follows the aircraft maintenance data and ends with a Certificate of Release to Service. Fit depends on the aircraft type, the serial number and the engine model.\u003c\/p\u003e","brand":"Tempest","offers":[{"title":"Default Title","offer_id":58184134197579,"sku":"AA3215CC","price":14061.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/AA3215CC.jpg?v=1790632869"},{"product_id":"aa48110-2","title":"Tempest AA48110-2 Spin EZ Oil Filter","description":"\u003cp\u003eTempest AA48110-2 is a Spin EZ spin-on oil filter for aircraft piston engines, the short version with a 3\/4-16 male thread, nominally 4 3\/8 in high and 3 3\/4 in in diameter (111 × 95 mm). The Tempest application guide lists it mainly for Lycoming engines such as O-235, O-320, O-360, IO-360, IO-540; the approved filter P\/N for each engine comes from the engine or airframe manufacturer's parts data.\u003c\/p\u003e\u003cp\u003eThe filter has resin-impregnated cellulose full-pleat media rated at 40 microns and a magnet. Tempest states a burst strength above 600 psi, 50 % over ARP 1400, and applies a solid lubricant to the gasket, so no oil or DC4 compound is needed at installation.\u003c\/p\u003e\u003cp\u003eTempest recommends 16–18 ft-lb (22–24 N·m) or hand-tight plus a quarter turn, and replacement at the engine manufacturer's interval, otherwise every 25 to 50 hours. Tempest classifies it as interchangeable with the AA48111, which is nominally 1-13\/16 in (46 mm) taller and holds more contaminant. Fit depends on the engine model.\u003c\/p\u003e","brand":"Tempest","offers":[{"title":"Default Title","offer_id":58184139178315,"sku":"AA48110-2","price":854.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/AA48110-2-main.jpg?v=1791190244"},{"product_id":"aad9-18-1","title":"Tempest AAD9-18-1 Pneumatic Filter Element","description":"\u003cp\u003eTempest AAD9-18-1 is a replacement filter element for aircraft pneumatic systems from the Tempest line of FAA-PMA pneumatic filters, with 0.3 micron filtration media. The Tempest pneumatic systems application guide lists it for aircraft such as the Mooney M20M and M20R, and on several types together with the AA1J7-1 filter assembly.\u003c\/p\u003e\u003cp\u003eThe element is selected by aircraft type and the installed filter assembly. Replacement follows the interval in the aircraft maintenance data, and the work ends with a Certificate of Release to Service. Fit depends on the aircraft type.\u003c\/p\u003e","brand":"Tempest","offers":[{"title":"Default Title","offer_id":58184142848331,"sku":"AAD9-18-1","price":658.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/AAD9-18-1.jpg?v=1790632907"},{"product_id":"aps105-00200-100","title":"APS APS105-00200-100 Brake Lining Rivets, Pack of 100","description":"\u003cp\u003eAPS APS105-00200-100 is a pack of 100 APS105-00200 brake lining rivets from Aviation Products Systems. FAA-PMA PQ3830CE approves the APS105-00200 rivet as a replacement for Parker Hannifin (Cleveland) P\/N 105-00200. The PMA supplements give installation eligibility for, among others, the Cirrus SR20, the Diamond DA20, DA40 and DA42, and Cessna, Maule and Viking Air models as modified by the STCs listed in the PMA.\u003c\/p\u003e\u003cp\u003eAPS also lists the APS105-00200 rivet in its kit plane application guide. On EASA-registered aircraft the eligibility of the FAA-PMA part follows EASA rules, and the brake is released to service after installation. Fit depends on the aircraft type and the lining P\/N.\u003c\/p\u003e","brand":"APS","offers":[{"title":"Default Title","offer_id":58184242299211,"sku":"APS105-00200-100","price":592.38,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/APS105-00200-100.jpg?v=1791669764"},{"product_id":"aps164-01700","title":"APS BlackSteel APS164-01700 Brake Disc","description":"\u003ch2\u003eAPS BlackSteel APS164-01700 brake disc\u003c\/h2\u003e\u003cp\u003eFAA-PMA APS BlackSteel replacement brake disc — Part number APS164-01700.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFAA-PMA APS BlackSteel replacement brake disc — Part number APS164-01700.\u003c\/li\u003e\n\u003cli\u003eExact identity: APS BlackSteel APS164-01700 brake disc\u003c\/li\u003e\n\u003cli\u003ePart number: APS164-01700\u003c\/li\u003e\n\u003cli\u003eVerify the exact part number, variant, approved equipment or aircraft eligibility, installation data and required interfaces before ordering.\u003c\/li\u003e\n\u003cli\u003ereplacement for Cleveland 164-01700 applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eAPS BlackSteel APS164-01700 brake disc — APS164-01700.\u003c\/p\u003e\u003ch3\u003ePurpose and selection\u003c\/h3\u003e\u003cp\u003eFAA-PMA APS BlackSteel replacement brake disc\u003c\/p\u003e\u003ch3\u003eCompatibility and installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, variant, approved equipment or aircraft eligibility, installation data and required interfaces before ordering.\u003c\/p\u003e","brand":"APS","offers":[{"title":"Default Title","offer_id":58184247443787,"sku":"APS164-01700","price":4674.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/aps164-01700.png?v=1790531439"},{"product_id":"aps164-01900","title":"APS APS164-01900 BlackSteel Brake Disc","description":"\u003cp\u003eAPS164-01900 — BlackSteel brake disc. Replacement brake disc whose published new thickness is 0.227 inch; application must be matched by wheel\/brake assembly number.\u003c\/p\u003e\u003cp\u003ePart number APS164-01900; brake disc; new thickness 5.766 mm \/ 0.227 in.\u003c\/p\u003e\u003cp\u003eCheck the exact part number, mating equipment, approved applicability and current manufacturer instructions before ordering or installation.\u003c\/p\u003e\u003cp\u003eOne APS164-01900; no device, cable or additional installation hardware is included unless stated.\u003c\/p\u003e","brand":"APS","offers":[{"title":"Default Title","offer_id":58184247705931,"sku":"APS164-01900","price":4274.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/APS164-01900.jpg?v=1792264888"},{"product_id":"aps66-10600","title":"APS APS66-10600 Brake Lining, Cleveland 066-10600 Replacement","description":"\u003cp\u003eAPS APS66-10600 is a brake lining made by Aviation Products Systems under FAA-PMA PQ3830CE as an approved replacement for Cleveland P\/N 066-10600 and for AP66-106 and SB66-10600. The PMA eligibility list covers about 30 aircraft makes, among them the Cessna 150A to 150E, 180, 185, 205 and 336, Piper J3, PA-18, PA-22-108, PA-28-140 to -180 and PA-38-112, Bellanca 7ECA, 7GCBC, 7KCAB and 8KCAB, Pitts S-1S and S-2, Diamond DA20 and Lake LA-4.\u003c\/p\u003e\u003cp\u003eIn the APS kit-plane application guide, APS66-10600 is the lining for Van's RV-3 through RV-9 with brake kit 199-102 (brake assembly 30-9, brake disc APS164-01700) and for the Pitts S1-C and S1-S, with rivet APS105-00200. APS publishes a conditioning (break-in) procedure for its linings, carried out after installation. On EASA-registered aircraft the eligibility of the FAA-PMA part follows EASA rules, and the brake is released to service after installation. Fit depends on the aircraft type and the P\/N of the lining fitted today.\u003c\/p\u003e","brand":"APS","offers":[{"title":"Default Title","offer_id":58184277885259,"sku":"APS66-10600","price":322.77,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/APS66-10600.jpg?v=1791669766"},{"product_id":"ba4106","title":"Brackett BA4106 Air Filter Assembly","description":"\u003cp\u003eBrackett BA4106 air-filter assembly — air-filter assembly. Complete Brackett filter assembly for aircraft applications listed in the current application table; BA4108 is the replacement element.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e BA4106\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e air-filter assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Only aircraft explicitly listed for BA4106\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Filter assembly; replacement element BA4108 identified separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number and revision to the headset, engine, aircraft or avionics system and follow current approved manufacturer data.\u003c\/p\u003e\u003cp\u003eOne Brackett BA4106 air-filter assembly; no parent device, cable or installation hardware unless explicitly listed.\u003c\/p\u003e","brand":"Brackett Aero Filters","offers":[{"title":"Default Title","offer_id":58184482750795,"sku":"BA4106","price":1720.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/brackett-ba-4106.jpg?v=1790580639"},{"product_id":"brackett-ba4108","title":"Brackett BA-4108 Air Filter Element","description":"\u003cp\u003eBrackett Aero Filters BA-4108 is the replacement treated-foam element for the Brackett BA-4106 and BA-4210 engine air filter assemblies. Brackett uses the BA-4108 element in both assemblies; the frame, grill (BA-4102 or BA-4202) and gasket (BA-4101 or BA-4201) stay on the aircraft, and only the element is replaced at the specified intervals. The assemblies are installed under FAA STC SA71GL.\u003c\/p\u003e\u003cp\u003eBrackett application data lists the BA-4106 assembly for light aircraft such as the Cessna 120, 140, 150 and 152, Piper J-3, PA-18 (early serial numbers), PA-22 and PA-38, Aeronca and American Champion models, the Luscombe 8 and Taylorcraft, and the BA-4210 assembly for the Grumman American AA-1 and AA-5. A US STC is not automatic EASA approval. Fit depends on the aircraft model and the P\/N of the installed filter assembly.\u003c\/p\u003e","brand":"Brackett Aero Filters","offers":[{"title":"Default Title","offer_id":58184482947403,"sku":"BA4108","price":263.04,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/BA4108.jpg?v=1791706141"},{"product_id":"cca1550","title":"Curtis Superior Valve CCA1550 Brass Quick-Drain Valve, 1\/8 NPT","description":"\u003cp\u003eCurtis CCA-1550 — aircraft fuel\/oil quick-drain valve. TSO-C76 brass quick-drain valve with 1\/8 NPT thread; push to open and turn to lock.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e CCA1550\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e aircraft fuel\/oil quick-drain valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector \/ interface:\u003c\/strong\u003e 1\/8 NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Push to open; turn to lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproval:\u003c\/strong\u003e TSO-C76\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, connector, voltage and approved application before ordering or installation. Follow current manufacturer and aircraft data.\u003c\/p\u003e\u003cp\u003eOne Curtis CCA-1550; no mating hardware, parent equipment or installation kit unless explicitly listed.\u003c\/p\u003e","brand":"Curtis","offers":[{"title":"Default Title","offer_id":58184501297483,"sku":"CCA1550","price":2026.7,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/CCA1550.jpg?v=1790591512"},{"product_id":"ch48110-1","title":"Champion CH48110-1 Spin-On Oil Filter","description":"\u003cp\u003e\u003cstrong\u003eChampion Aerospace CH48110-1\u003c\/strong\u003e — This concise accessory card contains only facts supported by the cited manufacturer material.\u003c\/p\u003e\u003cp\u003efull-flow spin-on aviation oil filter.\u003c\/p\u003e\u003cp\u003eengine and adapter applications specifically listed for CH48110-1 in the Champion catalog.\u003c\/p\u003e\u003cp\u003eShorter stud is intended for tight-clearance applications; confirm engine or airframe application data before installation.\u003c\/p\u003e","brand":"Champion","offers":[{"title":"Default Title","offer_id":58184716353867,"sku":"CH48110-1","price":823.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/CH48110-1.jpg?v=1791613802"},{"product_id":"mc154-00300","title":"McFarlane Aviation MC154-00300 Wheel Grease Seal Felt","description":"\u003cp\u003eMcFarlane Aviation MC154-00300 is a new FAA-PMA grease seal felt for the wheel bearing grease seals of Cessna and Piper aircraft with Cleveland or McCauley wheels. The McFarlane cross-reference lists OEM P\/N 154-00300 and 3021. For identification McFarlane gives approximate dimensions of 1-5\/8 in inside diameter, 2-5\/8 in outside diameter and 1\/8 in thickness. The felt is sold individually; McFarlane also supplies wheel grease seal kits with the seal rings, plates, snap rings and felts needed to service one wheel.\u003c\/p\u003e\u003cp\u003eThe McFarlane eligibility list covers Cessna models from the 120 and 140 through the 150, 152, 172, 182, 206 and 210 to the 337, each with the wheel listed for that model; entries for Beechcraft, Mooney, Maule, Britten-Norman and other makes are pending approval. Installation follows the aircraft maintenance data and ends with a Certificate of Release to Service. Fit depends on the aircraft model, serial number and wheel P\/N.\u003c\/p\u003e","brand":"McFarlane","offers":[{"title":"Default Title","offer_id":58187323408715,"sku":"MC154-00300","price":283.05,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/MC154-00300.jpg?v=1790591759"},{"product_id":"mc600-72","title":"McFarlane Aviation MC600-72 Vernier Mixture Control","description":"\u003cp\u003eMcFarlane Aviation MC600-72 is a new universal solid-wire vernier mixture control of the MC600 series, FAA-PMA approved as a minor alteration part for carbureted engines. McFarlane's eligibility chart 1404 (Rev. B) lists it for the Cessna 120 to 182 single-engine models including the Reims-built versions, Piper PA-18, PA-19, PA-20, PA-22, PA-24 and PA-28 models within stated serial ranges, the Beechcraft 35 to H35 Bonanza, Mooney M20 to M20D, carbureted Maule models and the Univair (Stinson) 108 series. The Beechcraft 19 and 23 models take the MC600-120 instead. McFarlane cross-references the MC600-72 to OEM P\/Ns 9862010-1, 9862010-3, S1234-5, S1234-11, 345-024-2 and 345-024-3.\u003c\/p\u003e\u003cp\u003eThe conduit is 1\/4 in (6.4 mm) in diameter with a Teflon liner and comes extra long, to be trimmed to the exact length. The control needs a 3\/4 in (19 mm) panel hole; most aircraft have a 1\/2 in (12.7 mm) factory hole that is enlarged first, and McFarlane points to its P\/N 44460 for this step. Installation follows the aircraft maintenance data and ends with a Certificate of Release to Service. Fit depends on the aircraft model and serial number.\u003c\/p\u003e","brand":"McFarlane","offers":[{"title":"Default Title","offer_id":58187323703627,"sku":"MC600-72","price":5819.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/MC600-72.jpg?v=1790591761"},{"product_id":"aeroleds-polaris","title":"AeroLEDs Polaris LED Position Light Bulb","description":"\u003cp\u003eAeroLEDs Polaris is an FAA-PMA LED position light bulb that replaces the incandescent bulb behind the red or green forward-facing navigation light lens. It has a Ba15s base and draws 7 W maximum. Two P\/Ns are offered: 11-7512-12 for 14 V DC systems (0.46 A maximum) and 11-7512-24 for 28 V DC systems (0.37 A maximum).\u003c\/p\u003e\u003cp\u003eThe bulb is a drop-in replacement in the existing lamp socket, measures 51 × 30 × 28 mm and weighs 32 g. The right version depends on the electrical system voltage.\u003c\/p\u003e","brand":"AeroLEDS","offers":[{"title":"12V","offer_id":58394970325323,"sku":"11-7512-12","price":3753.18,"currency_code":"CZK","in_stock":true},{"title":"24V","offer_id":58394970358091,"sku":"11-7512-24","price":3753.18,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/11-7512-12.jpg?v=1790591746"},{"product_id":"aeroleds-sunbeam","title":"AeroLEDs SunBeam LED Landing Light","description":"\u003cp\u003eAeroLEDs SunBeam is a rectangular LED landing and recognition light with integrated pulse (wigwag), offered as 90-1000-12 for 14 V and 90-1000-24 for 28 V electrical systems. AeroLEDs manufactures it under FAA PMA for a range of experimental aircraft and LSAs and lists both P\/Ns in the drawing list of FAA STC SA02386AK. It delivers a peak intensity of 90,000 cd in a 20° × 20° beam.\u003c\/p\u003e\u003cp\u003eThe 14 V version draws 2.7 A and the 28 V version 1.4 A, in steady or pulse mode; AeroLEDs rates the light at 38 W. The pulse function is built in and needs no external controller; it uses the yellow wire and an additional switch, and the blue and green wires synchronise multiple lights. The light measures 4 × 2.8 × 2 in (102 × 71 × 51 mm).\u003c\/p\u003e\u003cp\u003eThe light mounts in the existing holes. The installation checks the electrical load, keeps at least 4 in (102 mm) clearance from exhaust components unless heat shielding is fitted, and aims the light per the aircraft maintenance manual. For aircraft types on FAA AML SA02386AK that EASA has approved, EASA STC 10070175 is the approval path, and the installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the electrical system voltage.\u003c\/p\u003e","brand":"AeroLEDS","offers":[{"title":"12V","offer_id":58394976321867,"sku":"90-1000-12","price":9670.7,"currency_code":"CZK","in_stock":true},{"title":"24V","offer_id":58394976354635,"sku":"90-1000-24","price":12425.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/90-1000-12.jpg?v=1790591764"},{"product_id":"earthx-etx900","title":"EarthX ETX900-24 Lithium Battery, 26.4 V, 15.6 Ah","description":null,"brand":"EarthX","offers":[{"title":"26.4V, 15.6 Ah, 6.5\" x 5.1\" x 6.6\"","offer_id":58395175518539,"sku":"ETX900-24","price":23770.14,"currency_code":"CZK","in_stock":true},{"title":"13.2V, 15.6 Ah, 6.5\" x 3.1\" x 6.6\"","offer_id":58395175551307,"sku":"ETX900-TSO","price":18453.14,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/057-ETX900-24.jpg?v=1792162151"},{"product_id":"whelen-01-0771554","title":"Whelen 7155401","description":"\u003cp\u003eThe Whelen 71554 series is an aviation white LED tail position light for 14 V or 28 V DC aircraft, approved to TSO-C30c Type III; Whelen also lists E-TSO approval. Six LEDs sit under a clear hard-coated polycarbonate lens. The light weighs 0.14 lb (64 g) and measures 35.6 × 40.4 × 52.6 mm (exposed height × width × length).\u003c\/p\u003e\u003cp\u003e01-0771554-11 (7155411, horizontal) and 01-0771554-12 (7155412, vertical) are the 14 V versions: 11–15 V DC, 0.25 A, red +14 V and black ground leads. 01-0771554-01 (7155401, horizontal) and 01-0771554-02 (7155402, vertical) are the 28 V versions: 22–30 V DC, 0.125 A, white +28 V lead. Horizontal versions have the mounting holes at 9 and 3 o'clock, vertical versions at 12 and 6 o'clock. The light mounts as far aft as practicable on a thermally conductive surface. If any LED fails, the unit is repaired or replaced; Whelen specifies an annual inspection.\u003c\/p\u003e\u003cp\u003eWhelen lists EASA STC 10055068 for fixed-wing aircraft; EASA STC 10056206 for rotorcraft covers P\/N 01-0771554-( ) within its approved model list. A certified aircraft needs an approved modification and a Certificate of Release to Service. Fit depends on the aircraft type, the electrical system voltage and the mounting orientation.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"28V, Horizontal","offer_id":58395383431499,"sku":"01-0771554-01","price":7037.21,"currency_code":"CZK","in_stock":true},{"title":"28V, Vertical","offer_id":58395383464267,"sku":"01-0771554-02","price":7037.21,"currency_code":"CZK","in_stock":true},{"title":"14V, Horizontal","offer_id":58395383497035,"sku":"01-0771554-11","price":7037.21,"currency_code":"CZK","in_stock":true},{"title":"14V, Vertical","offer_id":58395383529803,"sku":"01-0771554-12","price":7037.21,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771554-01.jpg?v=1790591533"},{"product_id":"whelen-01-0790701","title":"Whelen OR6501GE","description":"\u003cp\u003eWhelen Orion 650E is an embedded LED wingtip lighthead that combines a forward position light and a white anti-collision light and is mounted behind a clear wingtip lens, not externally. The family covers OR6501GE (P\/N 01-0790701-01, green) and OR6501RE (-02, red) for 14 V DC, and OR6502GE (-11, green) and OR6502RE (-12, red) for 28 V DC. Whelen lists TSO\/ETSO-C96a Class II and TSO\/ETSO-C30c Type II (green) or Type I (red).\u003c\/p\u003e\u003cp\u003eAt 14 V the position light draws 0.30 A and the anti-collision light 0.70 A on average and 3.6 A peak; at 28 V the figures are 0.15 A, 0.35 A and 1.8 A. The anti-collision light has 24 white LEDs and flashes 45 ± 5 times per minute. The lighthead measures 98 × 43 × 56 mm and weighs 0.26 lb (about 120 g).\u003c\/p\u003e\u003cp\u003eThe assembly is mounted as far outboard as practical, with the baseplate parallel to the aircraft centrelines. FAA STC SA800EA includes P\/N 01-0790701-( ), and Whelen lists EASA STC 10055068, the EASA validation of SA800EA for GA aeroplanes on its approved model list. A certified aircraft needs an approved modification and a Certificate of Release to Service. Fit depends on the aircraft type and the existing wingtip lights.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Green, 12 V","offer_id":58395416625483,"sku":"01-0790701-01","price":13134.0,"currency_code":"CZK","in_stock":true},{"title":"Red, 12 V","offer_id":58395416658251,"sku":"01-0790701-02","price":13134.0,"currency_code":"CZK","in_stock":true},{"title":"Green, 28 V","offer_id":58395416691019,"sku":"01-0790701-11","price":13134.0,"currency_code":"CZK","in_stock":true},{"title":"Red, 28 V","offer_id":58395416723787,"sku":"01-0790701-12","price":13134.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0790701-01.jpg?v=1790592184"},{"product_id":"whelen-01-0790725","title":"Whelen OR6501G","description":"\u003cp\u003eWhelen Orion 650 is an LED wingtip light that combines a green or red forward position light and a white anti-collision light in one housing. The family covers OR6501G (P\/N 01-0790725-01, green) and OR6501R (-02, red) for 14 V DC, and OR6502G (-11, green) and OR6502R (-12, red) for 28 V DC. Whelen lists TSO\/ETSO-C96a Class III and TSO-C30c Type II (green) or Type I (red).\u003c\/p\u003e\u003cp\u003eAt 14 V the position light draws 0.2 A and the anti-collision light 0.39 A on average and 2.09 A peak; at 28 V the anti-collision light draws 0.2 A on average and 1.05 A peak. The anti-collision light has 18 white LEDs and flashes 45 ± 5 times per minute. A SYNC lead makes Whelen LED anti-collision lights flash together. Whelen cross-references the Orion 650 to the A650PG\/PR, 71110, 71105 and W1285 lights.\u003c\/p\u003e\u003cp\u003eOne light is fitted on each wingtip, as far outboard as practical, together with a tail light. FAA STC SA800EA names P\/N 01-0790725-( ). Whelen lists EASA STC 10055068, the EASA validation of SA800EA for GA aeroplanes on its approved model list; EASA STC 10056206 Rev. 1 names 01-0790725-( ) for rotorcraft. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the existing wingtip lights.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Green, 12 V","offer_id":58395424096587,"sku":"01-0790725-01","price":12988.1,"currency_code":"CZK","in_stock":true},{"title":"Red, 12 V","offer_id":58395424129355,"sku":"01-0790725-02","price":12988.1,"currency_code":"CZK","in_stock":true},{"title":"Green, 28 V","offer_id":58395424162123,"sku":"01-0790725-11","price":12988.1,"currency_code":"CZK","in_stock":true},{"title":"Red, 28 V","offer_id":58395424194891,"sku":"01-0790725-12","price":12988.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0790725-01.jpg?v=1790592196"},{"product_id":"whelen-01-0771080","title":"Whelen 7108001","description":"\u003cp\u003eThe Whelen 71080 series is a red LED anti-collision beacon for 28 V or 14 V DC aircraft and rotorcraft, approved to TSO-C96a Class I and III with 150 effective candela. The 28 V versions operate from 22–30 V DC and draw 0.45 A on average with 2.0 A pulses; the 14 V version draws 0.90 A with 4.0 A pulses.\u003c\/p\u003e\u003cp\u003e01-0771080-01 (7108001) is a 28 V unit with the A470A mount (2.6 in base, 295 g); 01-0771080-05 (7108005, upper) and 01-0771080-15 (7108015, lower) are 28 V units with a 3.75 in base; 01-0771080-55 (7108055) is the 14 V unit with a 3.75 in base. The 3.75 in versions (340 g) fit the A440 adapter and the mounting holes of rotating beacons and the Whelen HRCFA; all four have 12 in flying leads. Lower-mounted units need a waterproofed base and a 1\/8 in drain hole in the lens centre.\u003c\/p\u003e\u003cp\u003eEASA STC 10052976 (aeroplanes) and 10053536 (rotorcraft), based on FAA STC SA615EA, cover Whelen P\/N 01-0771080-( ) as a replacement for the originally installed anti-collision lights on the types in their approved model lists (manual 05131 Rev. E, placard A421). The aircraft is then released to service with a Certificate of Release to Service. Fit depends on the aircraft type, the voltage and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"28V, A470A Mount","offer_id":58395985019211,"sku":"01-0771080-01","price":16030.2,"currency_code":"CZK","in_stock":true},{"title":"28V, 3.75\"Adapt, Flying Leads","offer_id":58395985051979,"sku":"01-0771080-05","price":17437.7,"currency_code":"CZK","in_stock":true},{"title":"28V, 3.75\" Adapt, FlyingLeads, Lower","offer_id":58395985084747,"sku":"01-0771080-15","price":17437.7,"currency_code":"CZK","in_stock":true},{"title":"14VDC, 3.75\" Adapter, Flying Leads","offer_id":58395985117515,"sku":"01-0771080-55","price":17437.7,"currency_code":"CZK","in_stock":true},{"title":"LED Beacon Red, 14V, A470A Mount, MateNLock","offer_id":58798275002699,"sku":"01-0771080-51","price":16030.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771080-01.jpg?v=1790591417"}],"url":"https:\/\/shop.airteam.eu\/collections\/aircraft-piper-pa-18.oembed","provider":"AIR TEAM","version":"1.0","type":"link"}