{"title":"Transponders \u0026 ADS-B: Installation \u0026 Accessories","description":"\u003cp\u003eInstallation kits, racks and trays, connector kits, harnesses, licences, databases and accessories for transponders and ADS-B units such as GTX 335, GTX 345, NGT-9000, TRT800. Every item names the unit it fits.\u003c\/p\u003e\u003cp\u003eThe “Fits unit” filter narrows the list to your model. A quote for a complete installation needs the unit and the aircraft type.\u003c\/p\u003e","products":[{"product_id":"bendixking-kcm-100","title":"BendixKing KCM-100","description":null,"brand":"BendixKing","offers":[{"title":"071-00073-5000 \/ Repair (RPO)","offer_id":58181269684555,"sku":"071-00073-5000-RPO","price":0.0,"currency_code":"CZK","in_stock":true}]},{"product_id":"garmin-gtx-3000-connector-kit","title":"Garmin 011-02019-00 Connector Kit for GTX 3000","description":"\u003cp\u003eGarmin 011-02019-00 is the connector kit for the GTX 3000 Mode S transponder (unit 011-01997-00). It contains a 62-pin and a 78-pin high-density D-sub connector, a jackscrew backshell with hardware for each, 20 size 22D crimp pins, 7 size 22D pins for 18 and 20 AWG wire and 6 cm of Teflon heat-shrink tubing. With this kit the D-sub connectors carry an interfacial seal for the GTX 3000.\u003c\/p\u003e\u003cp\u003eGarmin supplies the GTX 3000 unit, rack (011-02515-00), configuration module and this kit separately; a 90-degree version (011-02019-01) and a harsh-environment kit for the GTX 3000HE (011-02019-02) are separate P\/Ns. Fit depends on the GTX 3000 unit P\/N.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"011-02019-00 \/ New","offer_id":58181423366475,"sku":"011-02019-00","price":13011.0,"currency_code":"CZK","in_stock":true}]},{"product_id":"trig-00223-00","title":"Trig 00223-00 Installation Kit for TT31 Transponder","description":"\u003cp\u003eTrig 00223-00 is the installation kit for the Trig TT31 Mode S transponder and its mounting tray 00231-00; Trig lists it among the items supplied with the TT31. The kit contains a 12-way and a 24-way double-sided Molex crimp housing connector, 30 female crimp terminals for 18–24 AWG wire, a right-angle blind-mate coaxial panel-mount connector with a 7\/16 in external circlip, a plain stainless steel washer and a crinkle beryllium copper washer, and four M3 × 12 mm Pozidriv pan head screws.\u003c\/p\u003e\u003cp\u003eThe coaxial connector is fed through the tray and held by the washers and the circlip. The two Molex connectors pass through the openings at the rear of the tray and are fixed from the inside with the four M3 screws. Antenna, altitude encoder and cables are not part of the kit. A certified aircraft needs an approved modification and a Certificate of Release to Service after installation.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181564105035,"sku":"00223-00","price":3824.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/00223-00.jpg?v=1790591510"},{"product_id":"trig-00231-01","title":"Trig 00231-01 Mounting Tray for TT31 Transponder","description":"\u003cp\u003eTrig 00231-01, part number 00231-01, is a mounting tray for the TT31 transponder. Confirm the exact part number and required configuration against the applicable installation or parts documentation before ordering.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181564170571,"sku":"00231-01","price":2848.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/00231-01.jpg?v=1791715506"},{"product_id":"l3harris-0035-17001-01","title":"Acron Aviation Lynx NGT-9000 TAS Enablement","description":"\u003cp\u003eAcron Aviation 0035-17001-01 (formerly L3Harris) is the enablement certificate that adds the TAS (Traffic Advisory System) active traffic function to a Lynx NGT-9000 MultiLink Surveillance System. In active mode the NGT-9000 tracks up to 35 ATCRBS intruders within 35 NM and 10,000 ft above and below, with bearing relative to the aircraft's nose. Acron lists TSO-C147 (Traffic Advisory System) for the NGT-9000 series.\u003c\/p\u003e\u003cp\u003eTAS runs on the + models (NGT-9000+, NGT-9000D+, NGT-9000R+ and NGT-9000RD+) and needs an NY156 or NY164 directional antenna in addition to the bottom antenna; on D+ models the directional antenna also serves as the diversity antenna. The antenna is not part of this item. The certificate carries a 10-digit code that is entered with the Lynx maintenance application during installation; the code is tied to the aircraft's ICAO address and works only for that aircraft. Fit depends on the NGT-9000 model and the installed antennas. An order needs the aircraft registration and the ICAO address.\u003c\/p\u003e","brand":"Acron Aviation","offers":[{"title":"Default Title","offer_id":58181564596555,"sku":"0035-17001-01","price":100026.94,"currency_code":"CZK","in_stock":true}]},{"product_id":"l3harris-0035-17002-01","title":"Acron Aviation 0035-17002-01 NGT-9000 Diversity Enablement","description":"\u003cp\u003e\u003cstrong\u003eL3Harris 0035-17002-01\u003c\/strong\u003e — NGT-9000 Diversity enablement; activation tied to aircraft ICAO data.\u003c\/p\u003e\u003cp\u003eMatch the complete part number and verify the current installation or maintenance data before order.\u003c\/p\u003e","brand":"Acron Aviation","offers":[{"title":"Default Title","offer_id":58181564727627,"sku":"0035-17002-01","price":52450.7,"currency_code":"CZK","in_stock":true}]},{"product_id":"l3harris-0035-17004-01","title":"Acron Aviation 0035-17004-01 NGT-9000 ATAS Enablement Certificate","description":"\u003cp\u003e\u003cstrong\u003eL3Harris 0035-17004-01\u003c\/strong\u003e — an NGT-9000 ATAS enablement certificate.\u003c\/p\u003e\u003cp\u003eFor an NGT-9000 configuration that requires ATAS enablement; the installation manual notes that ATAS is available without this certificate from Release 3.2 onward.\u003c\/p\u003e\u003cp\u003eOrder only for the stated platform and feature; confirm the exact part number and current manufacturer applicability before purchase.\u003c\/p\u003e","brand":"Acron Aviation","offers":[{"title":"Default Title","offer_id":58181564760395,"sku":"0035-17004-01","price":23788.9,"currency_code":"CZK","in_stock":true}]},{"product_id":"l3harris-0035-17010-01","title":"Acron Aviation 0035-17010-01 TerrainVision Enablement for Lynx NGT-9000","description":"\u003cp\u003eAcron Aviation 0035-17010-01 is the enablement certificate that activates TerrainVision on the panel-mount Lynx NGT-9000 (P\/N 9029000-20000); the NGT-9000 installation manual lists it as \"Enablement Certificate, NGT-9000, Terrain Display Only (No Alerts)\". TerrainVision shows colour-coded terrain and land-based obstacles around the aircraft, similar to the TAWS display but without visual or aural alerts, and is not a Class B TAWS.\u003c\/p\u003e\u003cp\u003eThe function needs NGT-9000 software Release 2.1 or later and is not available on the remote-mount NGT-9000R. It is activated with a 10-digit function activation code entered with the Lynx maintenance tool (MPC\/MAT) during installation; the code is tied to the aircraft ICAO (Mode S) address and works only on that aircraft. Fit depends on the installed NGT-9000 model. An order needs the aircraft ICAO address.\u003c\/p\u003e","brand":"Acron Aviation","offers":[{"title":"Default Title","offer_id":58181564924235,"sku":"0035-17010-01","price":30607.2,"currency_code":"CZK","in_stock":true}]},{"product_id":"trig-00667-00","title":"Trig 00667-00 Mounting Tray for TT21\/TT22 and TY91\/TY92","description":"\u003cp\u003eTrig 00667-00 is the mounting tray for the remote unit of the Trig TT21 and TT22 Mode S transponders and the TY91 and TY92 VHF radios; Trig lists it among the items supplied with each of these units. The tray mounts in any convenient location in the cockpit, the cabin or an avionics bay.\u003c\/p\u003e\u003cp\u003eThe tray is fixed to a flat surface through its three mounting holes and must also be supported at its dimples. The unit hooks with its connector end under the lip of the tray and is locked by clipping the retaining wire over the lugs at the opposite end. A certified aircraft needs an approved modification and a Certificate of Release to Service after installation. Fit depends on the unit it is for.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181579243851,"sku":"00667-00","price":1105.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/00667-00.jpg?v=1791629874"},{"product_id":"garmin-011-00582-00","title":"Garmin 011-00582-00 Backplate for GTX 330\/328\/33\/23 ES, BNC","description":"\u003cp\u003eGarmin 011-00582-00 is the backplate assembly with a BNC transponder antenna connector for the GTX 330 transponder. Garmin uses the same backplate for the GTX 328, GTX 33 and GTX 23 ES. The TNC version is 011-00582-04, and the diversity units GTX 330D and GTX 33D use 011-00582-01.\u003c\/p\u003e\u003cp\u003eThe GTX 330 and GTX 328 are installed in install rack 115-00294-00 with connector kit 011-00583-00; the GTX 33 and GTX 23 ES use the modular rack 115-00438-00 or the remote rack 115-00629-00 with connector kit 011-01012-01. On a certified aircraft the installation needs an approved modification and a Certificate of Release to Service. Fit depends on the transponder model and the antenna connector type.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181760844107,"sku":"011-00582-00","price":1778.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/011-00582-00.jpg?v=1791629904"},{"product_id":"garmin-011-00582-01","title":"Garmin 011-00582-01 GTX 33D Backplate Assembly","description":"\u003cp\u003eGarmin GTX 33D Backplate Assembly — backplate assembly. This exact Garmin item is intended for the GTX 33D remote transponder.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 011-00582-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e backplate assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e GTX 33D remote transponder installations requiring backplate P\/N 011-00582-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply scope:\u003c\/strong\u003e One item identified by the stated Garmin part number; parent equipment, wiring and installation hardware are excluded unless expressly listed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, parent equipment, connector and approved installation data before ordering or installation.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181760876875,"sku":"011-00582-01","price":2462.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/019-011-00582-01.jpg?v=1791814374"},{"product_id":"garmin-011-00582-02","title":"Garmin 011-00582-02 GTX 33H Backplate Assembly","description":"\u003cp\u003e\u003cstrong\u003eGarmin GTX 33H Backplate Assembly\u003c\/strong\u003e — supports the exact Garmin unit and installation documented by the manufacturer.\u003c\/p\u003e\u003cp\u003eMatch the full part number and applicable equipment revision; check the current installation manual and aircraft approval before order.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181761040715,"sku":"011-00582-02","price":5160.62,"currency_code":"CZK","in_stock":true}]},{"product_id":"garmin-011-00583-00","title":"Garmin 011-00583-00 Connector Kit for GTX 33\/330 and GTX 328","description":"\u003ch2\u003eGarmin GTX 33\/330 connector kit\u003c\/h2\u003e\u003cp\u003eGarmin connector kit documented for GTX 33\/330 installations and GTX 328 service use. Part number: 011-00583-00.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGarmin connector kit documented for GTX 33\/330 installations and GTX 328 service use.\u003c\/li\u003e\n\u003cli\u003eExact identity: Garmin GTX 33\/330 connector kit\u003c\/li\u003e\n\u003cli\u003ePart number: 011-00583-00\u003c\/li\u003e\n\u003cli\u003eGTX 33\/330 connector harness record\u003c\/li\u003e\n\u003cli\u003eGTX 328 software-service use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eGarmin GTX 33\/330 connector kit — Part number 011-00583-00.\u003c\/p\u003e\u003ch3\u003ePurpose and selection\u003c\/h3\u003e\u003cp\u003eGarmin connector kit documented for GTX 33\/330 installations and GTX 328 service use.\u003c\/p\u003e\u003ch3\u003eCompatibility and installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, parent equipment, approved installation data, connector and required interfaces before ordering.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181761106251,"sku":"011-00583-00","price":3252.8,"currency_code":"CZK","in_stock":true}]},{"product_id":"garmin-011-00651-01","title":"Garmin 011-00651-01 Connector Kit for GTX 320\/320A\/327","description":"\u003ch2\u003eGarmin 011-00651-01\u003c\/h2\u003e\u003cp\u003e011-00651-01 is an installation connector kit for Garmin GTX 320\/320A and GTX 327 installations. The package is identified as one exact catalog item; verify the exact approved application before ordering. Part number: 011-00651-01.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e011-00651-01 is an installation connector kit for Garmin GTX 320\/320A and GTX 327 installations. The package is identified as one exact catalog item; verify the exact approved application before ordering.\u003c\/li\u003e\n\u003cli\u003eExact identity: Garmin 011-00651-01\u003c\/li\u003e\n\u003cli\u003ePart number: 011-00651-01\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eGarmin 011-00651-01 — Part number 011-00651-01.\u003c\/p\u003e\u003ch3\u003ePurpose and compatibility\u003c\/h3\u003e\u003cp\u003e011-00651-01 is an installation connector kit for Garmin GTX 320\/320A and GTX 327 installations. The package is identified as one exact catalog item; verify the exact approved application before ordering.\u003c\/p\u003e\u003ch3\u003eContents\u003c\/h3\u003e\u003cp\u003eGTX 320 \/ 320A \/ 327.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181761139019,"sku":"011-00651-01","price":2873.3,"currency_code":"CZK","in_stock":true}]},{"product_id":"garmin-011-00677-01","title":"Garmin 011-00677-01 GTX 320A\/327 Backplate Kit with Hex","description":"\u003cp\u003eGarmin GTX 320A\/327 Backplate Kit with Hex — backplate assembly. This exact Garmin item is intended for GTX 320A and GTX 327 transponders.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 011-00677-01\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e backplate assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e GTX 320A and GTX 327 mounting-rack installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply scope:\u003c\/strong\u003e One item identified by the stated Garmin part number; parent equipment, wiring and installation hardware are excluded unless expressly listed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, parent equipment, connector and approved installation data before ordering or installation.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181761171787,"sku":"011-00677-01","price":2051.7,"currency_code":"CZK","in_stock":true}]},{"product_id":"garmin-011-01012-01","title":"Garmin 011-01012-01 Connector Kit for GTX 23\/33\/33D","description":"\u003ch2\u003eGarmin GTX 23 connector kit\u003c\/h2\u003e\u003cp\u003eConnector kit specified by Garmin for GTX 23 installations. Part number: 011-01012-01.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConnector kit specified by Garmin for GTX 23 installations.\u003c\/li\u003e\n\u003cli\u003eExact identity: Garmin GTX 23 connector kit\u003c\/li\u003e\n\u003cli\u003ePart number: 011-01012-01\u003c\/li\u003e\n\u003cli\u003e62-pin high-density D-sub connector\u003c\/li\u003e\n\u003cli\u003eBackshell and contact hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eGarmin GTX 23 connector kit — Part number 011-01012-01.\u003c\/p\u003e\u003ch3\u003ePurpose and selection\u003c\/h3\u003e\u003cp\u003eConnector kit specified by Garmin for GTX 23 installations.\u003c\/p\u003e\u003ch3\u003eCompatibility and installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, parent equipment, approved installation data, connector and required interfaces before ordering.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181766250827,"sku":"011-01012-01","price":3421.6,"currency_code":"CZK","in_stock":true}]},{"product_id":"garmin-011-01718-00","title":"Garmin 011-01718-00 Backplate Assembly for GDL 88","description":"\u003cp\u003eGarmin 011-01718-00 is the backplate assembly for the Garmin GDL 88 (unit P\/N 011-02369-00), the fixed-wing ADS-B data link without an internal GPS\/SBAS receiver. The GDL 88 is a remote-mounted unit with a 978 MHz UAT, a 1090 MHz receiver and a 1030 MHz transmitter; it transmits ADS-B Out on UAT and receives UAT, 1090ES and FIS-B data for a cockpit display. The backplate carries the cooling fan, which Garmin supplies as part of the assembly, and the BNC connection for the UAT\/1090 antenna.\u003c\/p\u003e\u003cp\u003eGarmin lists the backplate in GDL 88 standard kit 010-00859-30, together with configuration module kit 011-00979-03, connector kit 011-02375-00 and remote installation kit 011-02621-00. The backplate screw heads pass through keyed holes in the back of the rack and are secured with four 4-40 screws. The GDL 84 and GDL 88 with GPS\/SBAS use backplate 011-01718-10, the GDL 88D uses -20 and the GDL 88D with GPS\/SBAS -30. Garmin installation data for fixed-wing aircraft is the GDL 84\/88 Part 23 AML STC; a US AML STC is not automatic EASA approval, and a certified aircraft needs an approved modification and release to service. Fit depends on the GDL model and the unit P\/N.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181767889227,"sku":"011-01718-00","price":3421.6,"currency_code":"CZK","in_stock":true}]},{"product_id":"garmin-011-02375-00","title":"Garmin 011-02375-00 Connector Kit for GDL 84\/88","description":"\u003cp\u003eGarmin 011-02375-00 is the connector kit for the Garmin GDL 84\/88 family. Garmin lists it in the standard kits of all fixed-wing versions, the GDL 84, GDL 88 and GDL 88D with or without GPS\/SBAS, and of the rotorcraft GDL 84H, GDL 88H and GDL 88DH. The kit supplies the 78-pin high-density D-Sub connector 330-00185-78, #22D pin contacts 336-00021-00 and 4-40 × 0.250 in flat-head screws 211-63234-08.\u003c\/p\u003e\u003cp\u003eBackshell, ground adapter, configuration module kit 011-00979-03, backplate assembly and remote installation kit are separate P\/Ns; the backplate depends on the GDL model. Fit depends on the GDL model.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181788664139,"sku":"011-02375-00","price":2873.3,"currency_code":"CZK","in_stock":true}]},{"product_id":"garmin-011-02422-00","title":"Garmin 011-02422-00 GTX 33H Mounting Rack","description":"\u003cp\u003eGarmin 011-02422-00 GTX 33H Stand-Alone Rack — mounting rack for GTX 33H or GTX 33DH remote transponder installations.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 011-02422-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e mounting rack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e GTX 33H or GTX 33DH remote transponder installations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecision parameter:\u003c\/strong\u003e Stand-alone rack; connector and backplate are separate assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, parent equipment, revision and approved application before ordering; installation must follow current approved data.\u003c\/p\u003e\u003cp\u003eOne item identified by the stated part number; parent equipment, wiring and installation material are excluded unless explicitly listed.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181795086667,"sku":"011-02422-00","price":28993.3,"currency_code":"CZK","in_stock":true}]},{"product_id":"garmin-011-02515-00","title":"Garmin 011-02515-00 Mounting Rack for GTX 3000 Transponder","description":"\u003cp\u003eGarmin 011-02515-00 is the mounting rack for the GTX 3000 Mode S transponder (unit 011-01997-00), one rack per transponder, supplied separately from the unit. The GTX 3000 is a remote-mounted unit, and this standalone rack is fastened to the aircraft structure, which provides the structural support and the electrical bond. With the unit in the rack, the installation is 65.4 mm wide and 164.2 mm high, with a depth of 278 mm including connectors.\u003c\/p\u003e\u003cp\u003eThe GTX 3000 meets DO-160F waterproof Category W only when mounted vertically. The four #10 fasteners for the rack come from the installer, and the connector kit (011-02019-00, or 011-02019-01 with 90° backshells) is a separate P\/N. The GTX 3000HE uses the rack 011-02515-02. Fit depends on the GTX 3000 variant.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181795250507,"sku":"011-02515-00","price":9556.0,"currency_code":"CZK","in_stock":true}]},{"product_id":"garmin-011-02976-00","title":"Garmin 011-02976-00 Backplate for GTX 325\/335\/345, BNC","description":"\u003cp\u003eGarmin 011-02976-00 is the GTX 3X5 backplate assembly for panel mounting, standard remote mounting and G1000 (GX000) remote mounting, with a BNC transponder antenna connector and no GPS antenna connector. Garmin includes it in the standard kits of the GTX 325, GTX 335 and GTX 345 panel-mount transponders, including the NV versions, and of the GTX 335R and GTX 345R remote transponders in standard and G1000 mounting, all without internal GPS.\u003c\/p\u003e\u003cp\u003eGarmin lists the TNC version 011-02976-02 for use in place of this backplate. Units with internal GPS use 011-02976-01 with an additional TNC GPS antenna connector, vertical remote mounting uses 011-02976-10 and the diversity units the 011-04340 series. In the kits it is combined with install rack 115-01771-01 (G1000 mounting: 115-02250-00) and connector kit 011-02977-00 or 011-02977-01. On a certified aircraft the installation needs an approved modification and a Certificate of Release to Service. Fit depends on the transponder model and the antenna connector type.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181798363467,"sku":"011-02976-00","price":1778.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/011-02976-00.jpg?v=1791629918"},{"product_id":"garmin-011-02976-01","title":"Garmin 011-02976-01 Backplate for GTX 3X5 with GPS","description":"\u003cp\u003eGarmin 011-02976-01 is the connector backplate assembly for GTX 3X5 transponders with internal GPS, for panel-mounted units and for standard and GX000 remote installations. It provides a BNC connector for the transponder antenna and a TNC connector for the GPS antenna. Garmin includes it in the standard kits of the GTX 335 w\/GPS, GTX 335R w\/GPS, GTX 345 w\/GPS, GTX 345R w\/GPS and GTX 345 NV w\/GPS; the Garmin dealer list names it GTX 3X5 w\/ WAAS Backplate.\u003c\/p\u003e\u003cp\u003eThe connector kit and the optional GAE altitude encoder 011-03080-00 attach to the backplate; with a GAE fitted, the configuration module is not installed in the connector backshell. The related backplates are 011-02976-00 without GPS, 011-02976-02 with a TNC transponder connector and 011-02976-11 for vertical mounting with GPS. On a certified aircraft the backplate is part of the approved transponder installation, followed by a Certificate of Release to Service. Fit depends on the GTX model and the mounting type.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181798461771,"sku":"011-02976-01","price":2327.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/011-02976-01.jpg?v=1791629920"},{"product_id":"garmin-011-02976-02","title":"Garmin 011-02976-02 Backplate for GTX 3X5, TNC","description":"\u003cp\u003eGarmin 011-02976-02 is the GTX 3X5 backplate assembly with a TNC transponder antenna connector and no GPS antenna connector. Garmin lists it for use in place of the BNC backplate 011-02976-00, which the standard kits of the GTX 325, GTX 335, GTX 335R, GTX 345 and GTX 345R contain, for panel, standard remote and GX000 remote mounting.\u003c\/p\u003e\u003cp\u003eVersions with an internal GPS use backplate 011-02976-01 with a GPS antenna connector, vertical remote mounting uses the 011-02976-1x backplates, and the diversity models (D\/DR) use 011-04340-xx. A certified aircraft needs an approved modification and a Certificate of Release to Service after installation. Fit depends on the transponder model and the antenna connector type.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181798854987,"sku":"011-02976-02","price":2051.7,"currency_code":"CZK","in_stock":true}]},{"product_id":"garmin-011-02976-10","title":"Garmin 011-02976-10 Vertical-Mount Backplate for GTX 335R\/345R, BNC","description":"\u003cp\u003eGarmin 011-02976-10 is the GTX 3X5 backplate assembly for vertical remote mounting, with a BNC transponder antenna connector and no GPS antenna connector. Garmin includes it in the vertical-mount standard kits of the remote transponders GTX 335R (010-01215-02) and GTX 345R (010-01217-02 and 010-01217-07), in which the unit is mounted on the vertical remote mount 011-03762-00 with connector kit 011-02977-00 (GTX 335R) or 011-02977-01 (GTX 345R) and the configuration module 011-00979-03.\u003c\/p\u003e\u003cp\u003eGarmin lists the TNC version 011-02976-12 for use in place of this backplate; the GTX 335R and GTX 345R versions with internal GPS use 011-02976-11 with an additional TNC GPS antenna connector. On a certified aircraft the installation needs an approved modification and a Certificate of Release to Service. Fit depends on the transponder model and the antenna connector type.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181798920523,"sku":"011-02976-10","price":2600.1,"currency_code":"CZK","in_stock":true}]},{"product_id":"garmin-011-02976-11","title":"Garmin 011-02976-11 Vertical-Mount Backplate for GTX 335R\/345R with GPS","description":"\u003cp\u003eGarmin 011-02976-11 is the GTX 3X5 backplate assembly for vertical remote mounting of the transponder versions with internal GPS, with a BNC transponder antenna connector and a TNC GPS antenna connector. Garmin includes it in the vertical-mount standard kits GTX 335R with GPS (010-01215-42) and GTX 345R with GPS (010-01217-42 and 010-01217-47), in which the unit is mounted on the vertical remote mount 011-03762-00 with connector kit 011-02977-00 (GTX 335R) or 011-02977-01 (GTX 345R) and the configuration module 011-00979-03.\u003c\/p\u003e\u003cp\u003eGTX 335R and GTX 345R units without internal GPS use the vertical-mount backplates 011-02976-10 (BNC) or 011-02976-12 (TNC). On a certified aircraft the installation needs an approved modification and a Certificate of Release to Service. Fit depends on the transponder model and its GPS option.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181798953291,"sku":"011-02976-11","price":2548.0,"currency_code":"CZK","in_stock":true}]},{"product_id":"garmin-011-02977-00","title":"Garmin 011-02977-00 Connector Kit for GTX 325 and GTX 335","description":"\u003cp\u003eGarmin 011-02977-00 is the connector kit for the GTX 325 and GTX 335 transponders, including the GTX 335R and GTX 335DR remote units, the GTX 335D and the w\/GPS versions; Garmin includes it in each of their standard kits. The kit supplies the mating connectors for the two rear D-sub connectors of the unit: a 62-pin high-density D-sub for P3251 and a 15-pin high-density D-sub for P3252, #22D crimp contacts, the two backshell kits (011-00950-03 and 011-00950-00) and the two ground adapter kits with shield blocks (011-01169-01 and 011-01169-00).\u003c\/p\u003e\u003cp\u003eAll electrical connections except the antennas and shield grounds run through these connectors, and the shield grounds terminate at the backshells. Cable, shield terminators and ring terminals are not supplied; the harness is built to the GTX 3X5 installation manual. The GTX 345 family uses connector kit 011-02977-01. A certified aircraft needs approved installation data and release to service. Fit depends on the GTX model.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181799018827,"sku":"011-02977-00","price":3284.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/011-02977-00.jpg?v=1791629922"},{"product_id":"garmin-011-02977-01","title":"Garmin 011-02977-01 Connector Kit for GTX 345 Transponder","description":"\u003cp\u003eGarmin 011-02977-01 is the connector kit for the GTX 345 transponder series: GTX 345 and GTX 345R including the w\/GPS and NV versions, GTX 345D and GTX 345DR. Garmin includes it in every GTX 345-series unit kit; GTX 325 and GTX 335 units use connector kit 011-02977-00. The kit contains the backshell kits and the ground adapter (shield block) kits for both unit connectors, P3251 and P3252, together with the high-density D-sub connectors, 62-pin for P3251 and 15-pin for P3252, and #22D crimp pin contacts.\u003c\/p\u003e\u003cp\u003eCable shield grounds terminate at the backshell housing through the shield block. Shielded cable, shield terminators, #8 ring terminals with their screws and washers, and silicone fusion tape are not supplied. Fit depends on the transponder model.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181799084363,"sku":"011-02977-01","price":3557.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/garmin-gtx-345-connector-kit-011-02977-01.jpg?v=1790162249"},{"product_id":"garmin-011-03762-00","title":"Garmin 011-03762-00 GTX 3X5R Vertical Mount Rack","description":"\u003ch2\u003eGarmin 011-03762-00\u003c\/h2\u003e\u003cp\u003e011-03762-00 is a mounting rack for vertically mounted Garmin GTX 3X5R remote transponders. Verify the exact approved installation and supplied contents before ordering. Part number: 011-03762-00.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e011-03762-00 is a mounting rack for vertically mounted Garmin GTX 3X5R remote transponders. Verify the exact approved installation and supplied contents before ordering.\u003c\/li\u003e\n\u003cli\u003eExact identity: Garmin 011-03762-00\u003c\/li\u003e\n\u003cli\u003ePart number: 011-03762-00\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eGarmin 011-03762-00 — Part number 011-03762-00.\u003c\/p\u003e\u003ch3\u003ePurpose and compatibility\u003c\/h3\u003e\u003cp\u003e011-03762-00 is a mounting rack for vertically mounted Garmin GTX 3X5R remote transponders. Verify the exact approved installation and supplied contents before ordering.\u003c\/p\u003e\u003ch3\u003eContents\u003c\/h3\u003e\u003cp\u003eGTX 335R \/ 345R vertical configuration.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181822349643,"sku":"011-03762-00","price":19157.9,"currency_code":"CZK","in_stock":true}]},{"product_id":"garmin-011-04340-10","title":"Garmin 011-04340-10 Vertical-Mount Backplate for GTX 335DR\/345DR, BNC","description":"\u003cp\u003eGarmin 011-04340-10 is the backplate assembly for the diversity remote transponders GTX 335DR and GTX 345DR in a vertical remote mounting. The transponder antenna connections are BNC, with an R-SMA connector for the Bluetooth antenna. Garmin includes it in the standard vertical-mount kits 010-01774-02 (GTX 335DR) and 010-01776-02 (GTX 345DR), in which the unit is mounted on the vertical remote mount 011-03762-00 with connector kit 011-02977-00 (GTX 335DR) or 011-02977-01 (GTX 345DR) and the configuration module 011-00979-03.\u003c\/p\u003e\u003cp\u003eGarmin lists the TNC version 011-04340-11 for use in place of this backplate; the vertical-mount kit 010-01774-04 with mount 011-04431-01 uses 011-04340-04 with TNC connectors. The GTX 345DR can use the optional remote Bluetooth antenna kit 011-04148-00. On a certified aircraft the installation needs an approved modification and a Certificate of Release to Service. Fit depends on the transponder model and the antenna connector type.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181823234379,"sku":"011-04340-10","price":2600.1,"currency_code":"CZK","in_stock":true}]},{"product_id":"tc20-kontrolni-jednotka","title":"Trig TC20 Mode S Transponder Controller","description":"\u003cp\u003eTrig TC20 (P\/N 01318-00) is the panel-mounted controller for the Trig TT21, TT22 and TT23 remote-mounted Mode S transponders, with a built-in altitude encoder. It fits the Trig compact cut-out or a standard 57 mm (2¼ in) instrument hole, needs 54 mm behind the panel and weighs 90 g. The controller is certified to ETSO-2C112b and ETSO-C88a (TSO-C112c and TSO-C88b), covers −1,000 to 35,000 ft and operates from −20 to +55 °C.\u003c\/p\u003e\u003cp\u003eA single 9-way D-type connector links the TC20 to the transponder: it receives 6.5 V power and a two-wire data link from the transponder, and its power\/mode switch drives the transponder’s power-on input. A separate RS-232 output at 9600 bps sends pressure altitude in Icarus\/Garmin format for GPS baro-aiding. The altitude encoder connects to the same static source as the primary altimeter. A certified aircraft needs an approved modification and a Certificate of Release to Service after installation. Fit depends on the transponder model and the aircraft type.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181831655755,"sku":"01318-00","price":14427.7,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01318-00.jpg?v=1791629937"},{"product_id":"trig-01690-00","title":"Trig 01690-00 Installation Kit for TN72 GPS Position Source","description":"\u003cp\u003eTrig 01690-00 is the installation kit for the Trig TN72 GPS position source; Trig lists it among the items supplied with the TN72. The kit contains a QMA coaxial connector for the GPS antenna lead, a 9-way female D-type contact housing with a 9-way headshell and nine female crimp terminals for 22–24 AWG wire, and the TN72 installation manual 01691-00.\u003c\/p\u003e\u003cp\u003eThe GPS antenna, its fixing hardware, the cables and the four flat head screws and self-locking nuts for mounting the receiver are not part of the kit. A certified aircraft needs an approved modification and a Certificate of Release to Service after installation.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181831852363,"sku":"01690-00","price":2678.6,"currency_code":"CZK","in_stock":true}]},{"product_id":"bendixking-050-02934-0001","title":"BendixKing 050-02934-0001 Installation Kit for KFS 578A \/ PS-578A","description":"\u003cp\u003eBendixKing 050-02934-0001 is the installation kit for the KFS 578A and PS-578A Mode S\/TCAS control units, which control one or two transponders or a TCAS per ARINC 718. The kit contains the 29-pin connector 030-01174-0000 (P5781) and the 9-pin connector 030-01171-0000 (P5782), each with hood and lever assembly, 36 crimp sockets, two female polarizing pins and two 6-32 anchor nuts.\u003c\/p\u003e\u003cp\u003eBendixKing lists the same kit in the installation manuals of the MST 67A Mode S transponder and the CAS 66A and CAS 67A TCAS systems. The control unit and the PS-578A configuration programming harness are separate items. Fit depends on the control unit P\/N and the aircraft type.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"Default Title","offer_id":58181887852875,"sku":"050-02934-0001","price":27644.3,"currency_code":"CZK","in_stock":true}]},{"product_id":"bendixking-050-02979-0000","title":"BendixKing 050-02979-0000 MST 67A Installation Kit with Rack","description":"\u003cp\u003eHoneywell\/BendixKing MST 67A installation kit — installation kit. Installation kit for the MST 67A Mode S transponder system, including the rack and specified connector hardware listed in the installation manual.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 050-02979-0000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem type:\u003c\/strong\u003e installation kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Honeywell MST 67A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScope of supply:\u003c\/strong\u003e Mounting rack 047-09406-0014, connector hardware, pins, spacers and fasteners per manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproval \/ applicability:\u003c\/strong\u003e MST 67A approved installation data required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, mating equipment, approved aircraft applicability and current manufacturer instructions before ordering or installation.\u003c\/p\u003e\u003cp\u003eOne Honeywell\/BendixKing MST 67A installation kit; no mating unit or additional installation material unless explicitly listed.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"Default Title","offer_id":58181890638155,"sku":"050-02979-0000","price":103967.36,"currency_code":"CZK","in_stock":true}]},{"product_id":"am6400-1-01","title":"Becker AM6400-1-(01) Mode S Address Module, 0572.942-915","description":"\u003cp\u003eBecker AM6400-1-(01) — Mode S address module. Stores the programmed aircraft address for compatible Becker BXP6401\/BXP6403 transponder installations.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 0572.942-915\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem type:\u003c\/strong\u003e Mode S address module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Becker BXP6401 \/ BXP6403\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem type:\u003c\/strong\u003e AM6400-1-(01) address module\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproval \/ applicability:\u003c\/strong\u003e Program and install per current Becker instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, mating equipment, approved aircraft applicability and current manufacturer instructions before ordering or installation.\u003c\/p\u003e\u003cp\u003eOne Becker AM6400-1-(01); no mating unit or additional installation material unless explicitly listed.\u003c\/p\u003e","brand":"Becker Avionics","offers":[{"title":"Default Title","offer_id":58181910921547,"sku":"0572.942-915","price":2231.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/becker-0572-942-915.jpg?v=1790538018"},{"product_id":"harness-xpndr","title":"Dynon SV-HARNESS-XPNDR Transponder Harness","description":"\u003cp\u003eDynon SV-HARNESS-XPNDR — transponder harness. Prewired harness connects the currently listed compatible Dynon transponder to a SkyView installation.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 102558-000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e transponder harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e SV-XPNDR-263 in the April 2026 Dynon Customer Sales Guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, revision, connector and approved application before ordering or installation. Follow current manufacturer and aircraft data.\u003c\/p\u003e\u003cp\u003eOne Dynon SV-HARNESS-XPNDR; parent equipment, mating hardware and installation materials are not included unless explicitly listed.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182205407563,"sku":"102558-000","price":2906.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/102558-000.jpg?v=1790591231"},{"product_id":"harness-adsb","title":"Dynon HARNESS-ADSB Wiring Harness for SkyView ADS-B Receiver","description":"\u003ch2\u003eHARNESS-ADSB\u003c\/h2\u003e\u003cp\u003e102629-000 is a wiring harness for the Dynon SkyView ADS-B receiver. The package is identified as one exact catalog item; verify the exact approved application before ordering. Part number: 102629-000.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e102629-000 is a wiring harness for the Dynon SkyView ADS-B receiver. The package is identified as one exact catalog item; verify the exact approved application before ordering.\u003c\/li\u003e\n\u003cli\u003eExact identity: HARNESS-ADSB\u003c\/li\u003e\n\u003cli\u003ePart number: 102629-000\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eHARNESS-ADSB — Part number 102629-000.\u003c\/p\u003e\u003ch3\u003ePurpose and compatibility\u003c\/h3\u003e\u003cp\u003e102629-000 is a wiring harness for the Dynon SkyView ADS-B receiver. The package is identified as one exact catalog item; verify the exact approved application before ordering.\u003c\/p\u003e\u003ch3\u003eContents\u003c\/h3\u003e\u003cp\u003eSkyView ADS-B receiver.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182207373643,"sku":"102629-000","price":2600.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/102629-000.jpg?v=1790591239"},{"product_id":"gps-2020","title":"Dynon SV-GPS-2020 WAAS GPS Receiver and Antenna, 102749-000","description":"\u003cp\u003eDynon SV-GPS-2020 P\/N 102749-000 is a WAAS GPS receiver\/antenna module that provides an integrity-qualified position source for compatible SkyView and AF-5000 systems and supported ADS-B Out configurations.\u003c\/p\u003e\u003cp\u003eDescription: WAAS GPS receiver. Dimensions: 2.19 × 0.82 × 3.44″. Weight: 0.47 lb \/ 0.21 kg. Maximum velocity: 400 kt. Update rate: 4 Hz. Interface: RS-232 NMEA, 115200 baud. Integrity: SIL 3; SDA 2 with supported system.\u003c\/p\u003e\u003cp\u003eDo not paint the module. Confirm external mounting, unobstructed sky view, 400-knot limit, current software\/service-bulletin compliance and the exact supported transponder\/system combination.\u003c\/p\u003e\u003cp\u003eOne SV-GPS-2020 receiver\/antenna module. Wiring and installation hardware are not established as included.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182207603019,"sku":"102749-000","price":23388.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/dynon-102749-000-sv-gps-2020.jpg?v=1790494710"},{"product_id":"dynon-104031-000","title":"Dynon 104031-000 COM\/XPNDR Module Mounting Kit","description":"\u003cp\u003eDynon 104031-000 COM\/XPNDR Radio Stack Module Mounting Kit — radio-stack module mounting kit. Exact radio-stack module mounting kit for remote SkyView SV-COM-T8\/T25 and SV-XPNDR-261\/263 modules; not SV-COM-760.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 104031-000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e radio-stack module mounting kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e remote SkyView SV-COM-T8\/T25 and SV-XPNDR-261\/263 modules; not SV-COM-760\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDecision parameter:\u003c\/strong\u003e Supports upright or inverted installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, parent equipment, revision and approved application before ordering; installation must follow current approved data.\u003c\/p\u003e\u003cp\u003eGold-alodined aluminum tray, cover plate, straps, nut plates and mounting hardware; radio\/transponder modules are excluded.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182217072971,"sku":"104031-000","price":3671.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/104031-000.jpg?v=1790591255"},{"product_id":"sv-button-ident","title":"Dynon SV-BUTTON-IDENT Transponder IDENT Button","description":"\u003cp\u003eDynon SV-BUTTON-IDENT, part number 104075-000, is a transponder IDENT button. Confirm the exact part number and required configuration against the applicable installation or parts documentation before ordering.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182217859403,"sku":"104075-000","price":2562.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/104075-000-1.jpg?v=1790946395"},{"product_id":"garmin-115-00294-00","title":"Garmin 115-00294-00 GTX 328\/330 Installation Rack","description":"\u003cp\u003eGarmin GTX 328\/330 Installation Rack — mounting rack. Exact mounting rack for GTX 328, GTX 330 and GTX 330D installations listed in current Garmin data.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 115-00294-00\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e mounting rack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e GTX 328, GTX 330 and GTX 330D installations listed in current Garmin data\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Panel-mount transponder installation rack\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, parent unit, connector, aircraft application and current approved installation data.\u003c\/p\u003e\u003cp\u003eOne item identified by the stated part number; parent equipment, wiring and installation hardware are excluded unless explicitly listed.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58182342115659,"sku":"115-00294-00","price":1017.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/053-115-00294-00.jpg?v=1791814449"},{"product_id":"garmin-115-01771-01","title":"Garmin 115-01771-01 Mounting Rack for GTX 3X5","description":"\u003cp\u003eGarmin 115-01771-01 is the standard install rack for the GTX 3X5 transponder family. Garmin supplies it in the standard kits of the panel-mounted GTX 325, GTX 335 and GTX 345, including their D, NV and GPS versions, and of the remote GTX 335R, 345R, 335DR and 345DR in the standard mount. Garmin states that 115-01771-01 is the functional equivalent of 115-01771-00, and that the hi-vib standard rack 115-01771-05 can be used in its place where higher vibration levels apply.\u003c\/p\u003e\u003cp\u003eFor a panel installation the rack is 160 mm (6.30 in) wide and 43 mm (1.68 in) high dimple to dimple, and the transponder with connectors needs 256 mm behind the panel. A standard remote rack can be mounted in any orientation as long as all six mounting screws are attached to a mounting bracket. The connector backplate (011-02976-00\/-01) and the connector kit (011-02977-00\/-01) are separate Garmin part numbers. Under the GTX 3X5 Part 27 AML STC, a unit on this rack is limited to rotorcraft with a main rotor first blade passage frequency of 42.75 Hz or less. On a certified aircraft the rack is installed as part of an approved modification with a Certificate of Release to Service. Fit depends on the GTX 3X5 model and the mounting type.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58182361973067,"sku":"115-01771-01","price":3284.0,"currency_code":"CZK","in_stock":true}]},{"product_id":"tq-systems-342813","title":"TQ-Systems 342813 ADS-B Out Upgrade Code for KTX2-S Basic","description":"\u003cp\u003e\u003cstrong\u003eTQ-Systems 342813\u003c\/strong\u003e — ADS-B Out software upgrade code for a KTX2-S Basic transponder. Before ordering, verify the exact part number and configuration against the current product or installation documentation.\u003c\/p\u003e","brand":"TQ-Systems","offers":[{"title":"Default Title","offer_id":58182639616331,"sku":"342813","price":11649.5,"currency_code":"CZK","in_stock":true}]},{"product_id":"9020-17009-01","title":"L3Harris 9020-17009-01","description":"\u003cp\u003eAcron Aviation 9020-17009-01 is a short pre-fabricated coaxial cable assembly for the Lynx NGT-9000, with a straight size 8 plug on one end and a BNC jack on the other. The Lynx installation manual lists these assemblies for the L-band and GPS antenna cabling. The assembly is 8.00 ± 0.50 in (about 203 mm) long, with a maximum loss of 0.50 dB and a maximum VSWR of 1.5:1.\u003c\/p\u003e\u003cp\u003eOne 9020-17009-01 is part of the straight-connector installation kits 9060-17000-01 (panel mount) and 9060-17500-01 (remote mount). The NGT-9000+ and NGT-9000D+ need three additional pigtail assemblies for the active traffic directional antenna and the NGT-9000D one for the upper L-band antenna; the number depends on the installation configuration. The TNC and right-angle versions are 9020-17008-01, 9020-17010-01 and 9020-17011-01. Fit depends on the transponder model.\u003c\/p\u003e","brand":"Acron Aviation","offers":[{"title":"Default Title","offer_id":58183989330251,"sku":"9020-17009-01","price":3706.27,"currency_code":"CZK","in_stock":true}]},{"product_id":"l3harris-9020-17010-01","title":"Acron Aviation 9020-17010-01 TNC Right-Angle Plug Cable Assembly for NGT-9000","description":"\u003cp\u003e\u003cstrong\u003eL3Harris 9020-17010-01\u003c\/strong\u003e — a right-angle plug cable assembly with TNC jack.\u003c\/p\u003e\u003cp\u003eDocumented in the Lynx NGT-9000 installation data; do not substitute the adjacent BNC or straight-plug variants.\u003c\/p\u003e\u003cp\u003eSelect by the exact part number and verify the applicable approved installation or parts data before ordering.\u003c\/p\u003e","brand":"Acron Aviation","offers":[{"title":"Default Title","offer_id":58183989363019,"sku":"9020-17010-01","price":3706.27,"currency_code":"CZK","in_stock":true}]},{"product_id":"l3harris-9060-17001-01","title":"Acron Aviation 9060-17001-01 Installation Kit for Lynx PIM-9000","description":"\u003cp\u003eAcron Aviation 9060-17001-01 is the installation kit for the Lynx PIM-9000 Wi-Fi module, formerly sold under L3Harris. Acron lists Wi-Fi output through the PIM-9000 for the Lynx NGT-9000, NGT-9000+, NGT-9000D and NGT-9000D+ ADS-B transponders: the Lynx passes traffic and weather data to the module, which broadcasts its own network to a tablet running a compatible aviation app.\u003c\/p\u003e\u003cp\u003eThe kit contains a 9-pin female D-sub connector (614A0022) and a 9-position backshell with slide lock (3050-10081-01). The PIM-9000 module itself (9230-17005-01) is a separate item. In a certified aircraft the installation follows approved data and ends with a Certificate of Release to Service. Fit depends on the Lynx model and the aircraft type.\u003c\/p\u003e","brand":"Acron Aviation","offers":[{"title":"Default Title","offer_id":58183992607051,"sku":"9060-17001-01","price":2983.8,"currency_code":"CZK","in_stock":true}]},{"product_id":"l3harris-9060-17500-01","title":"Acron Aviation 9060-17500-01 Installation Kit for Lynx NGT-9000R, Straight RF","description":"\u003cp\u003eAcron Aviation 9060-17500-01 is the remote-mount installation kit with straight RF connectors for the Lynx NGT-9000R ADS-B transponder (P\/N 9029000-40000), formerly sold under L3Harris. The kit contains the remote-mount tray assembly and rear plate, a float-mount 78-position D-sub connector with 78 crimp contacts, a float-mount 5W5 RF D-sub connector with backshell, two short coaxial cable assemblies with straight plugs (one to a BNC jack, one to a TNC jack), a grounding clip, ground straps, wire clamps and mounting hardware.\u003c\/p\u003e\u003cp\u003eThe NGT-9000R+, RD and RD+ need additional pigtail cable assemblies for the directional or second L-band antenna, which are ordered separately. Kit 9060-17500-02 is the same kit with right-angle RF connectors. A certified aircraft needs an approved modification and a Certificate of Release to Service after installation. Fit depends on the transponder model and its options.\u003c\/p\u003e","brand":"Acron Aviation","offers":[{"title":"Default Title","offer_id":58183992672587,"sku":"9060-17500-01","price":53032.4,"currency_code":"CZK","in_stock":true}]},{"product_id":"l3harris-9230-17003-01","title":"L3Harris 9230-17003-01 NGT-9000 Configuration Module","description":"\u003cp\u003e\u003cstrong\u003eL3Harris 9230-17003-01\u003c\/strong\u003e — Detachable configuration module for NGT-9000.\u003c\/p\u003e\u003cp\u003eMatch the complete part number and check the current installation or maintenance data before ordering.\u003c\/p\u003e","brand":"Acron Aviation","offers":[{"title":"Default Title","offer_id":58184004862283,"sku":"9230-17003-01","price":6216.2,"currency_code":"CZK","in_stock":true}]},{"product_id":"pim-9000","title":"L3Harris PIM-9000","description":"\u003cp\u003eAcron Aviation Lynx PIM-9000 (P\/N 9230-17005-01) is the Wi-Fi module of the Lynx NGT-9000 ADS-B transponder series. Acron lists Wi-Fi output through the PIM-9000 for the NGT-9000, NGT-9000+, NGT-9000D and NGT-9000D+. The Lynx passes its traffic and weather data through to the module, which broadcasts its own network (SSID) to a tablet or other portable electronic device; the device needs an aviation app that supports ADS-B In, TIS-B, ADS-R and FIS-B.\u003c\/p\u003e\u003cp\u003eThe module is installed and configured according to the Lynx installation manual; in a certified aircraft the work needs approved data and a Certificate of Release to Service. Fit depends on the Lynx model and the aircraft type.\u003c\/p\u003e","brand":"Acron Aviation","offers":[{"title":"Default Title","offer_id":58184004927819,"sku":"9230-17005-01","price":7969.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/9230-17005-01.jpg?v=1791721364"},{"product_id":"air-team-gtx_es_upgrade","title":"AIR TEAM GTX 33\/330 Extended Squitter Upgrade","description":null,"brand":"AIR TEAM","offers":[{"title":"Default Title","offer_id":58184676639051,"sku":"GTX_ES_UPGRADE","price":46228.8,"currency_code":"CZK","in_stock":true}]},{"product_id":"funkwerk-trkabel2","title":"f.u.n.k.e. AVIONICS TRKABEL2 Transponder Antenna Cable, 2.5 m, TNC\/BNC","description":"\u003cp\u003ef.u.n.k.e. AVIONICS TRKABEL2 is a 2.5 m (8.2 ft) transponder antenna cable with a TNC connector at one end and a BNC connector at the other. The TRT800H manual lists it among the transponder accessories; the TRT800H has a TNC antenna socket, and the f.u.n.k.e. transponder antennas AV-74 and TRANSFLEX02\/03\/04 have BNC connectors. The same cable is available as TRKABEL1 (1.0 m), TRKABEL3 (4.0 m) and TRKABEL4 (6.5 m).\u003c\/p\u003e\u003cp\u003eThe TRT800H manual limits the attenuation between antenna and transponder at 1090 MHz to 1.5 dB, sets a minimum bend radius of 10 cm and asks for at least 12 in of separation from an ADF antenna cable. Fit depends on the transponder model and the cable length required.\u003c\/p\u003e","brand":"f.u.n.k.e. AVIONICS","offers":[{"title":"Default Title","offer_id":58187472306507,"sku":"TRKABEL2","price":2464.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/TRKABEL2.jpg?v=1790591410"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/collections\/category-avionics-transponders-adsb-installation.jpg?v=1791370957","url":"https:\/\/shop.airteam.eu\/collections\/avionics-transponders-adsb-installation.oembed","provider":"AIR TEAM","version":"1.0","type":"link"}