{"title":"Black Friday 2026: výprodej −20 %","description":"\u003cp\u003eVýprodej s extra slevou −20 % k výprodejové ceně, 27. 11. – 6. 12. 2026.\u003c\/p\u003e","products":[{"product_id":"bendixking-aeropoint-200","title":"BendixKing AeroPoint 200 Engine Monitor","description":"\u003cp\u003eBendixKing AeroPoint 200 is an engine data monitor for certified single-engine aircraft. It is TSO-approved as a primary instrument and can replace the original engine gauges. P\/N 89000035-002 (APO20002) is the version for six-cylinder engines. The display mounts in portrait or landscape orientation, measures 130 × 142 × 84 mm plus about 51 mm for connectors, weighs 680 g and runs on 7.5–35 V DC at 0.5 A.\u003c\/p\u003e\u003cp\u003eStandard functions cover RPM, manifold pressure, EGT, CHT, oil temperature and pressure, outside air temperature, fuel flow from a FloScan 201 or 231 transducer with fuel used and time to empty, volts, amps with a 100 A shunt and percent horsepower. The unit monitors continuously, warns when a parameter exceeds its programmed limit, supports lean-of-peak and rich-of-peak operation and records all engine parameters with GPS position to a USB memory stick for trend analysis. Options include TIT, fuel pressure, fuel quantity from frequency-type senders, a second volts or amps channel, CDT, induction air and carburettor temperature, and a carbon monoxide detector.\u003c\/p\u003e\u003cp\u003eBendixKing configures the unit with the engine data supplied by the purchaser. In an aircraft registered in an EASA state, the installation is an approved modification that ends with a release to service; the approval path is confirmed for the type before a firm quote. Fit depends on the aircraft type, the engine model and the required options.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"89000035-002 \/ New","offer_id":58181264343371,"sku":"89000035-002","price":146461.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/89000035-002.jpg?v=1791715771"},{"product_id":"bendixking-art-2000","title":"BendixKing ART 2000 Weather Radar Receiver\/Transmitter","description":"\u003cp\u003eBendixKing ART 2000 is the antenna\/receiver\/transmitter unit of the RDR 2000 color weather radar with vertical profile. It has an X-band transmitter with 3.5 kW typical output (4 kW magnetron peak), displays weather at ranges from 10 to 240 NM, scans 90° or 100° and stabilizes the antenna for combined pitch, roll and tilt up to ±30°. The unit runs on 28 V DC, weighs 4.5 kg and complies with TSO-C63c.\u003c\/p\u003e\u003cp\u003eIn vertical profile mode, the antenna scans a vertical slice of ±30° along the track line selected on the indicator. The RDR 2000 system also needs a 10 in or 12 in flat-plate antenna, a configuration module and a radar indicator such as the IN-182A or an MFD. The 10 in and 12 in antennas are separate part numbers, and the configuration module belongs to installation kit 050-03088-0000. With a connector change, the unit replaces the RS 181A or RS 811A in an RDS 81 or RDS 82 installation.\u003c\/p\u003e\u003cp\u003eP\/N 071-01519-0101 is offered new, serviceable\/overhauled, or as a repair of the customer’s unit. A new radar installation in a certified aircraft needs an approved modification and a Certificate of Release to Service. Fit depends on the installed radar indicator or display; a repair quote needs the serial number.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"071-01519-0101-OH \/ Overhauled","offer_id":58181264802123,"sku":"071-01519-0101-OH","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"071-01519-0101 \/ Repair (RPO)","offer_id":58181264834891,"sku":"071-01519-0101-RPO","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"071-01519-0101 \/ Serviceable \/ Overhauled","offer_id":58181264867659,"sku":"071-01519-0101-SV","price":326876.1,"currency_code":"CZK","in_stock":true},{"title":"071-01519-0101 \/ New","offer_id":58181264900427,"sku":"071-01519-0101","price":0.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/071-01519-0101-OH.jpg?v=1791629803"},{"product_id":"bendixking-ka-51b","title":"BendixKing KA 51B Slaving Control and Compensator","description":"\u003cp\u003eBendixKing KA 51B is the slaving control and compensator unit of the KCS 55A slaved compass system. The system also includes the KMT 112 magnetic slaving transmitter, the KG 102A directional gyro and the KI 525A pictorial navigation indicator. BendixKing also lists the KA 51B in the KCS 305 slaved gyrocompass system with the KSG 105 directional gyro.\u003c\/p\u003e\u003cp\u003eThe unit carries a slaving meter, an AUTO\/MAN switch for slaved or free gyro operation and a CW\/CCW switch for manual heading adjustment. The shop P\/Ns are 28 V versions with a black bezel: 071-1242-06 is the horizontal-mount version and 071-01242-0006 is its 12-digit form; 071-1242-01 is the second 28 V black version.\u003c\/p\u003e\u003cp\u003eP\/N 071-01242-0006 is offered new; 071-1242-01 and 071-1242-06 are offered serviceable\/overhauled. Installation in a certified aircraft ends with a release to service. Fit depends on the P\/N with dash number and the installed compass system.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"071-01242-0006 \/ New","offer_id":58181267325259,"sku":"071-01242-0006","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"071-1242-01 \/ Serviceable \/ Overhauled","offer_id":58181267358027,"sku":"071-1242-01-SV","price":20851.0,"currency_code":"CZK","in_stock":true},{"title":"071-1242-06 \/ Serviceable \/ Overhauled","offer_id":58181267390795,"sku":"071-1242-06-SV","price":19452.29,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/071-1242-06.jpg?v=1791735555"},{"product_id":"bendixking-ka-92","title":"BendixKing KA 92 GPS Antenna","description":"\u003cp\u003eBendixKing KA 92, P\/N 071-01553-0200, is an active L1 GPS antenna in a compact, aerodynamically styled patch housing that mounts on top of the aircraft. It measures 4.30 × 2.70 × 0.70 in (109 × 69 × 18 mm) and weighs 0.27 lb (0.12 kg). Honeywell names it, together with the KA 91, as the GPS antenna for the KLN 90B, and the KA 92 is part of the basic KLN 90B installation.\u003c\/p\u003e\u003cp\u003eThe manual data gives a supply of 5 V DC ±0.5 V at 50 mA maximum, a nominal impedance of 50 Ω, a nominal gain of 26.5 dB, a noise figure of 2.3 dB and a speed rating of 600 kt TAS. The antenna goes on top of the fuselage near the cockpit, at least 3 ft from the VHF COM antenna, on a baseplate that is level within 5° in both axes. The cable is RG 400\/U or RG 142B\/U up to 40 ft with a TNC or BMA connector, with a maximum allowable loss of 8.0 dB.\u003c\/p\u003e\u003cp\u003eP\/N 071-01553-0200 is offered new or serviceable\/overhauled. Replacing the antenna on a certified aircraft follows the approved data for the aircraft and ends with a release to service. Fit depends on the installed GPS navigator.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"071-01553-0200 \/ Serviceable \/ Overhauled","offer_id":58181268013387,"sku":"071-01553-0200-SV","price":7297.9,"currency_code":"CZK","in_stock":true},{"title":"071-01553-0200 \/ New","offer_id":58181268046155,"sku":"071-01553-0200","price":48157.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/071-01553-0200-SV.jpg?v=1791629815"},{"product_id":"bendixking-kdi-573","title":"BendixKing KDI 573 DME Slave Indicator","description":"\u003cp\u003eBendixKing KDI 573 is a DME indicator for the copilot or crew, used together with a KDI 572 or KDI 574 master indicator. It has no selector switch: DME channeling and DME HOLD are selected on the master indicator. The compact unit has a gas-discharge display that a photocell dims automatically.\u003c\/p\u003e\u003cp\u003eBendixKing lists the KDI 573 for the KN 63, KDM 706, KDM 706A and KTU 709 remote DMEs and offers it with 28 V or 5 V DC lighting. Models are available with an annunciator that shows whether the master indicator is set to NAV 1, NAV 2 or DME HOLD. The unit is TSO-approved. P\/N 066-01069-0002 is the 12-digit form of 066-1069-02.\u003c\/p\u003e\u003cp\u003eP\/N 066-01069-0002 is offered new; P\/N 066-1069-02 is offered serviceable\/overhauled or as a repair of the customer’s unit. Warranty and release document depend on the condition and are stated in the quote. Fit depends on the installed master indicator and DME and the lighting voltage; a repair quote needs the P\/N and S\/N of the unit.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"066-01069-0002 \/ New","offer_id":58181271617867,"sku":"066-01069-0002","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"066-1069-02 \/ Repair (RPO)","offer_id":58181271650635,"sku":"066-1069-02-RPO","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"066-1069-02 \/ Serviceable \/ Overhauled","offer_id":58181271683403,"sku":"066-1069-02-SV","price":35698.95,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/066-01069-0002-1.jpg?v=1791374723"},{"product_id":"bendixking-kfs-564a","title":"BendixKing KFS 564A NAV Frequency Selector","description":"\u003cp\u003eBendixKing KFS 564A is the control and display unit for the KNR 634 and KNR 634A VOR\/LOC\/glideslope\/marker beacon receivers. It shows the active and standby frequencies at the same time on gas-discharge numerics and swaps them with a flip-flop transfer. The unit is microprocessor controlled and keeps nine pilot-programmable frequencies in non-volatile memory when power is off. It measures 53.2 × 57.2 × 146.7 mm (W × H × L) and is rated for −20 to +55 °C.\u003c\/p\u003e\u003cp\u003eA photocell sets the display brightness; a dimmer override allows manual setting. With the KNS 660 the unit also provides frequency management. KFS 564A versions differ in ON\/OFF\/VOLUME control, black or grey bezel, 28 V or 5 V panel lighting and civil or military operating mode. P\/N 071-1283-12, in 12-digit form 071-01283-0012, is the version with black bezel, 28 V lighting and VOLUME\/ON\/OFF control.\u003c\/p\u003e\u003cp\u003eNew units are offered as 071-01283-0012; serviceable\/overhauled units and repair of the customer’s unit are offered as 071-1283-12. Warranty and release document depend on the condition and are stated in the quote. Installation in a certified aircraft ends with a release to service.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"071-01283-0012 \/ New","offer_id":58181273157963,"sku":"071-01283-0012","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"071-1283-12 \/ Repair (RPO)","offer_id":58181273190731,"sku":"071-1283-12-RPO","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"071-1283-12 \/ Serviceable \/ Overhauled","offer_id":58181273223499,"sku":"071-1283-12-SV","price":48327.15,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/071-01283-0012.jpg?v=1791614416"},{"product_id":"bendixking-kfs-594","title":"BendixKing KFS 594 HF Control Unit","description":"\u003cp\u003eBendixKing KFS 594 is the panel-mounted HF control unit for the KHF 950, KHF 990 and KMC 95 HF communication systems. P\/N 071-1274-01 (071-01274-0001) is the version with 28 V lighting, a black bezel and a diffused lens. It tunes the HF transceiver from 2000.0 to 29999.9 kHz, selects any of the 176 ITU channels or one of 19 user-programmable simplex or duplex channels, and sets the emission mode USB, LSB or AM.\u003c\/p\u003e\u003cp\u003eFrequency and channel appear on a gas discharge display with automatic photocell dimming. The unit carries the system ON\/OFF switch and the volume and squelch controls; the STO key stores channels and monitors the transmit frequency of a duplex channel. In the KHF 950 the KFS 594 sends its data over a serial bus to the KA 594, in the KHF 990 to the KTR 993. It runs on 9 to 32 V DC at 4 W, weighs 0.36 kg and is rated for −20 to +55 °C and 50,000 ft.\u003c\/p\u003e\u003cp\u003eThe HF system units and the installation kit (050-01986-0000 solder, 050-01986-0001 crimp) are separate parts. The unit is offered serviceable\/overhauled. Installation in a certified aircraft ends with a release to service. Fit depends on the P\/N, the installed HF system and the aircraft type.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"071-1274-01 \/ Serviceable \/ Overhauled","offer_id":58181274206539,"sku":"071-1274-01-SV","price":61510.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/071-1274-01.jpg?v=1791724036"},{"product_id":"bendixking-kg-102a","title":"BendixKing KG 102A Directional Gyro","description":"\u003cp\u003eBendixKing KG 102A is the remote-mounted directional gyro of the KCS 55A slaved compass system. It stabilizes the system heading and contains the slaving circuitry. The KMT 112 magnetic slaving transmitter sends the direction of the earth’s magnetic field through this circuitry to the gyro, which is corrected for precession. The unit operates on 14 V or 28 V DC.\u003c\/p\u003e\u003cp\u003eThe heading is displayed on the KI 525A indicator. Its red HDG flag stays in view until the gyro is up to speed and whenever power is inadequate. In slaved mode the compass card fast-slaves at 180° per minute to the magnetic heading and then follows it at 3° per minute. In free gyro mode, set on the KA 51B slaving control or used after a slaving failure, the heading comes from the KG 102A alone and is corrected manually against the standby compass.\u003c\/p\u003e\u003cp\u003eHoneywell lists P\/N 060-00015-0000 as the directional gyro; 060-0015-00 is its 9-digit form. P\/N 060-00015-0000 is offered new; P\/N 060-0015-00 is offered serviceable\/overhauled or as a repair of the customer’s unit. Warranty and release document depend on the condition and are stated in the quote. Fit depends on the aircraft type; a repair quote needs the P\/N and S\/N of the unit.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"060-00015-0000 \/ New","offer_id":58181275582795,"sku":"060-00015-0000","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"060-0015-00 \/ Repair (RPO)","offer_id":58181275615563,"sku":"060-0015-00-RPO","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"060-0015-00 \/ Serviceable \/ Overhauled","offer_id":58181275648331,"sku":"060-0015-00-SV","price":48327.15,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/060-00015-0000.jpg?v=1791629823"},{"product_id":"bendixking-kln-90b","title":"BendixKing KLN 90B GPS Navigator","description":"\u003cp\u003eBendixKing KLN 90B is a panel-mounted 8-channel GPS navigation system certified to TSO-C129 class A1 for IFR en route, terminal and non-precision approach navigation. It shows navigation pages and a moving map on a 3.3-inch CRT display and uses a pilot-updatable Jeppesen database, either North American or International. The unit runs on 11–33 V DC at up to 2.5 A.\u003c\/p\u003e\u003cp\u003eA basic installation consists of the unit, a database cartridge, an altitude input and a KA 92 antenna. The KLN 90B drives an external CDI or HSI, can be coupled to an autopilot and has a Leg\/OBS mode; an RMI, fuel management systems, external moving maps and air data systems can be added. Versions of the KLN 90B meet the JAA B-RNAV guidance AMJ 20X2 for European airspace when used with PreFlight software version 2.0 or later. 066-04031-1121 is the basic version, -1122 adds B-RNAV, -2121 is a unit upgraded from a KLN 90A, and -2122 is a KLN 90A upgrade with B-RNAV.\u003c\/p\u003e\u003cp\u003eServiceable\/overhauled units are offered as 066-04031-1222 and -2122, and repair of the customer’s unit for -1121, -1122, -2121 and -2122. Warranty and release document depend on the condition and are stated in the quote. Installation in a certified aircraft ends with a release to service. Fit depends on the P\/N of the installed unit; a repair quote needs the serial number and fault description.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"066-04031-1121 \/ Repair (RPO)","offer_id":58181278695755,"sku":"066-04031-1121-RPO","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"066-04031-1122 \/ Repair (RPO)","offer_id":58181278728523,"sku":"066-04031-1122-RPO","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"066-04031-1222 \/ Serviceable \/ Overhauled","offer_id":58181278761291,"sku":"066-04031-1222-SV","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"066-04031-2121 \/ Repair (RPO)","offer_id":58181278794059,"sku":"066-04031-2121-RPO","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"066-04031-2122 \/ Repair (RPO)","offer_id":58181278826827,"sku":"066-04031-2122-RPO","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"066-04031-2122 \/ Serviceable \/ Overhauled","offer_id":58181278859595,"sku":"066-04031-2122-SV","price":32541.9,"currency_code":"CZK","in_stock":true},{"title":"066-04031-1122 \/ Serviceable - Overhauled","offer_id":59225213534539,"sku":"066-04031-1122-SV","price":53170.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/066-04031-1122.jpg?v=1791720365"},{"product_id":"bendixking-kma-24","title":"BendixKing KMA 24 Audio Panel with Marker Beacon","description":"\u003cp\u003eBendixKing KMA 24 is a solid-state audio control panel with a built-in marker beacon receiver for the Silver Crown avionics stack. The unit is 159 mm wide, 33 mm high and 173 mm deep behind the panel, weighs 0.77 kg and runs on 14 V or 28 V DC. The marker beacon receiver is certified to TSO-C35d Class A and the audio amplifier to TSO-C50b.\u003c\/p\u003e\u003cp\u003eThe KMA 24 controls up to three transceivers and six receivers, including the internal marker beacon receiver with its three automatically dimmed lamps. Audio goes to the speaker, the headphones or both; a separate isolation amplifier feeds the headphones, and keying the microphone mutes all receivers. P\/N 066-1055-03 has selections for TEL, COM 1, COM 2, NAV 1, NAV 2, DME, MKR, ADF and AUTO; with AUTO, the receiver audio follows the transmitter chosen on the microphone selector.\u003c\/p\u003e\u003cp\u003eThe slant-top case is designed for the top slot of the panel stack. BendixKing lists the KMA 24 as discontinued and names the AeroPanel as its replacement. P\/N 066-1055-03 is offered serviceable\/overhauled. Installation in a certified aircraft ends with a release to service. Fit depends on the P\/N with dash number and the aircraft type.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"066-1055-03 \/ Serviceable \/ Overhauled","offer_id":58181279285579,"sku":"066-1055-03-SV","price":20851.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/066-1055-03-SV.jpg?v=1791686969"},{"product_id":"bendixking-kn-72","title":"BendixKing KN 72 VOR\/LOC Converter","description":"\u003cp\u003eBendixKing KN 72 is a VOR\/LOC converter for VOR\/LOC navigation indicators that have no built-in converter. It processes the VOR or localizer signal of the VHF NAV receiver for the indicator’s deviation needle, TO\/FROM indication and NAV warning flag. P\/N 066-4009-00 is the BendixKing part number; 066-04009-0000 is its 12-digit form.\u003c\/p\u003e\u003cp\u003eBendixKing documents the KN 72 with the KX 155 and KX 155A NAV\/COM. With a KX 155A, the combinations KN 72 with KI 202, KI 206, KI 525A, KPI 552 or KPI 553 meet all TSO system requirements. The KI 202\/206\/207 installation manual lists the KN 72 among the converters that meet all TSO system requirements with these indicators. Indicators with a built-in converter, such as the KI 203, KI 204, KI 208 and KI 209, work with the KX 155A without a KN 72.\u003c\/p\u003e\u003cp\u003eThe shop offers P\/N 066-4009-00 in serviceable\/overhauled condition. Warranty and release document depend on the unit and are stated in the quote. Installation in a certified aircraft follows approved data for that aircraft and ends with a release to service. Fit depends on the NAV receiver and indicator models and the aircraft type.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"066-4009-00 \/ Serviceable \/ Overhauled","offer_id":58181281907019,"sku":"066-4009-00-SV","price":3059.91,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/066-4009-00.jpg?v=1791724040"},{"product_id":"bendixking-kni-415","title":"BendixKing KNI 415 Radar Altimeter Indicator","description":"\u003cp\u003eBendixKing KNI 415 is a radar altimeter indicator for the KRA 405B or KRA 405 receiver\/transmitter. Its scale reads from −20 to 2000 ft, with 10 ft graduations up to 500 ft and 100 ft graduations from 500 to 2000 ft. Accuracy is ±4 ft or ±4 % up to 500 ft and ±5 % from 500 to 2000 ft.\u003c\/p\u003e\u003cp\u003eThe DH knob sets the decision height bug from 0 to 2000 ft; the DH lamp lights at that height, and isolated relay contacts switch an external DH circuit. A flag shows power failure or invalid altitude, the TEST button checks the system at 50 ± 5 ft, and above 2000 ft the needle moves behind a mask. P\/N 066-3031-01 has a black faceplate with 28 V lighting, 066-3031-04 a black faceplate with night vision goggle (NVG) lighting.\u003c\/p\u003e\u003cp\u003eThe indicator fits a 3-inch ATI instrument hole, mounted in front of or behind the panel, weighs 0.77 kg and is certified to TSO-C87 \/ ETSO-2C87. P\/N 066-3031-01 is offered serviceable\/overhauled, 066-3031-04 as a repair of the customer's unit. The receiver\/transmitter, antennas and indicator installation kit are separate parts. Fit depends on the P\/N with dash number and the installed radar altimeter.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"066-3031-01 \/ Serviceable \/ Overhauled","offer_id":58181282300235,"sku":"066-3031-01-SV","price":41702.0,"currency_code":"CZK","in_stock":true},{"title":"066-3031-04 \/ Repair (RPO)","offer_id":58181282333003,"sku":"066-3031-04-RPO","price":0.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/066-3031-01.jpg?v=1791724042"},{"product_id":"bendixking-kra-405","title":"BendixKing KRA 405 Radar Altimeter","description":"\u003cp\u003eBendixKing KRA 405 is a radar altimeter receiver\/transmitter that measures height above terrain from −20 to 2500 ft. It transmits 150 mW nominal (FMCW) at 4300 MHz with an accuracy of ±3 ft or ±3 % up to 500 ft and ±5 % from 500 to 2000 ft. The system alerts the pilot at the selected decision height and supplies altitude to the flight control system during the approach.\u003c\/p\u003e\u003cp\u003eHeight is output as analog voltages for the KNI 415 or KNI 416 indicator and for Honeywell, Collins or Sperry equipment. P\/N 066-1048-02 has three altitude trips, set at the factory to 250, 500 and 1200 ft and adjustable in the shop; it replaces 066-1048-00. The unit runs on 27.5 V DC ±20 % at 850 mA and is certified to TSO-C87.\u003c\/p\u003e\u003cp\u003eThe R\/T mounts in the equipment bay in a 3-inch rack, rigid or shock-mounted, and works with two KA 54A antennas on RG-393 cables. The later KRA 405B uses the same rack. P\/N 066-1048-02 is offered as a serviceable overhauled unit; both P\/Ns are also repaired on the customer’s unit. Fit depends on the P\/N and the installed indicator; a repair quote needs the serial number and fault description.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"066-1048-00 \/ Repair (RPO)","offer_id":58181286035787,"sku":"066-1048-00-RPO","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"066-1048-02 \/ Repair (RPO)","offer_id":58181286068555,"sku":"066-1048-02-RPO","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"066-1048-02 \/ Serviceable \/ Overhauled","offer_id":58181286101323,"sku":"066-1048-02-SV","price":162709.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/066-1048-00.jpg?v=1791724047"},{"product_id":"bendixking-ks-272c","title":"BendixKing KS 272C Autopilot Trim Servo","description":"\u003cp\u003eBendixKing KS 272C is the elevator trim servo of BendixKing flight control systems; BendixKing’s KFC 225 documentation shows it as the trim servo next to the KS 270C pitch servo and the KS 271C roll servo. The servo contains a motor with amplifier and an engage clutch solenoid and is installed on a KM 275 servo mount, whose slip clutch prevents damage to the aircraft in a trim runaway.\u003c\/p\u003e\u003cp\u003eThe servo receives a differential command and runs at a speed proportional to its magnitude; the polarity sets the direction. The dash numbers -0400, -0600, -0800, -1400, -2700 and -3500 differ in manual trim speed, clutch setting and clutch input pin. Service Bulletin KS 272C-7 (Mod 7) introduced a drive motor with slower-wearing brushes for units up to S\/N 6899; it is a factory modification at the operator’s option.\u003c\/p\u003e\u003cp\u003eOffered: 065-00180-0400 serviceable\/overhauled, and repair of customer units with P\/N 065-00180-0600, -2700 and -3500. BendixKing Service Memo 292 calls for an annual or 1000-hour inspection of the servo for corrosion and dirt around the engage solenoid, or an alternative periodic inspection procedure. Replacement on a certified aircraft follows the approved data and ends with a Certificate of Release to Service. Fit depends on the P\/N with dash number and the aircraft type.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"065-00180-0400 \/ Serviceable \/ Overhauled","offer_id":58181288296779,"sku":"065-00180-0400-SV","price":35698.95,"currency_code":"CZK","in_stock":true},{"title":"065-00180-0600 \/ Repair (RPO)","offer_id":58181288329547,"sku":"065-00180-0600-RPO","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"065-00180-2700 \/ Repair (RPO)","offer_id":58181288362315,"sku":"065-00180-2700-RPO","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"065-00180-3500 \/ Repair (RPO)","offer_id":58181288395083,"sku":"065-00180-3500-RPO","price":0.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/065-00180-0400.jpg?v=1791724052"},{"product_id":"bendixking-kt-70","title":"BendixKing KT 70 Mode S Transponder","description":"\u003cp\u003eBendixKing KT 70 is a panel-mount Mode S transponder certified to TSO-C112 (DO-181). Besides Mode A and Mode C replies it answers Mode S all-call and selective interrogations with the basic surveillance formats 0, 4, 5 and 11; it has no ADS-B Out. The solid-state transmitter delivers 125 to 500 W peak. The unit runs on 11–33 V DC without configuration changes and measures 41 × 159 × 266 mm.\u003c\/p\u003e\u003cp\u003eMode and code are set with rotary knobs; a gas-discharge display shows the code, the flight level and the aircraft address, with VFR and IDENT buttons. The aircraft address and maximum airspeed must be programmed before the transponder operates, either in the unit or in the optional address module 050-02927-0000 on the tray, which keeps the data with the aircraft when units are exchanged. P\/N 066-01141-0101 weighs 1.56 kg and 066-01141-0201 1.64 kg without tray.\u003c\/p\u003e\u003cp\u003eThe KT 70 can replace a KT 76A or KT 78A: on 28 V aircraft the dropping resistor is removed from the harness, the harness fuse is changed from 3 A to 5 A and an RFI suppression adaptor, if fitted, is removed. BendixKing names the KT 74 as its successor. Both P\/Ns are offered serviceable\/overhauled. Installation in a certified aircraft ends with a release to service. Fit depends on the P\/N with dash number and the aircraft type.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"066-01141-0101 \/ Serviceable \/ Overhauled","offer_id":58181290492235,"sku":"066-01141-0101-SV","price":27106.3,"currency_code":"CZK","in_stock":true},{"title":"066-01141-0201 \/ Serviceable \/ Overhauled","offer_id":58181290525003,"sku":"066-01141-0201-SV","price":22050.78,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/066-01141-0101.jpg?v=1791724057"},{"product_id":"bendixking-kt-71","title":"BendixKing KT 71 Mode A\/C Transponder","description":"\u003cp\u003eBendixKing KT 71 is a panel-mount Mode A\/C transponder certified to TSO-C74c. Its solid-state transmitter replies on 1090 MHz with 125 to 500 W peak; it offers 4096 identity codes with IDENT and, in ALT mode, reports pressure altitude from an encoding altimeter. The unit runs on 11–33 V DC without configuration changes, measures 41 × 159 × 266 mm and weighs 1.56 kg without tray.\u003c\/p\u003e\u003cp\u003eMode and code are set with rotary knobs; a gas-discharge display shows the code and, in ALT mode, the flight level. The VFR code and the display adjustment are programmed from the front panel and kept in nonvolatile memory; the optional module 050-02927-0000 on the tray keeps these settings with the aircraft when units are exchanged.\u003c\/p\u003e\u003cp\u003eThe KT 71 has no Mode S and no ADS-B Out. It can replace a KT 76A or KT 78A: on 28 V aircraft the dropping resistor is removed from the harness, the harness fuse is changed from 3 A to 5 A and an RFI suppression adaptor, if fitted, is removed. BendixKing names the KT 74 as its successor. P\/N 066-01141-5101 is offered serviceable\/overhauled. Installation in a certified aircraft ends with a release to service. Fit depends on the P\/N with dash number and the aircraft type.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"066-01141-5101 \/ Serviceable \/ Overhauled","offer_id":58181290623307,"sku":"066-01141-5101-SV","price":15858.11,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/066-01141-5101-SV.jpg?v=1791629827"},{"product_id":"bendixking-kt-76a","title":"BendixKing KT 76A Mode A\/C Transponder","description":"\u003cp\u003eBendixKing KT 76A is a panel-mount Mode A\/C transponder for 14 V aircraft, certified to TSO-C74b Class I. It replies on 1090 MHz with at least 200 W peak, offers 4096 identity codes with IDENT and reports pressure altitude in 100 ft steps from an external altitude encoder. It is tested to 35,000 ft.\u003c\/p\u003e\u003cp\u003eThe function selector sets standby, ON or ALT; a reply lamp flashes with each reply and stays on during IDENT. After switch-on the unit needs 45 s to warm up. It runs on 13.75 V DC; in a 28 V aircraft a 10 Ω, 55 W dropping resistor from a voltage changeover kit is mounted away from the avionics stack. P\/N 066-1062-00 is the standard version, 066-1062-10 the Crown Series version with a black faceplate.\u003c\/p\u003e\u003cp\u003eThe KT 76A has no Mode S and no ADS-B Out. BendixKing names the KT 74 as its replacement; the KT 74 uses the KT 76A primary and antenna connectors. P\/N 066-1062-00 is offered serviceable\/overhauled, 066-1062-10 as a repair of the customer's unit. Installation in a certified aircraft ends with a release to service. Fit depends on the P\/N with dash number and the aircraft type.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"066-1062-00 \/ Serviceable \/ Overhauled","offer_id":58181290852683,"sku":"066-1062-00-SV","price":31570.5,"currency_code":"CZK","in_stock":true},{"title":"066-1062-10 \/ Repair (RPO)","offer_id":58181290885451,"sku":"066-1062-10-RPO","price":0.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/066-1062-00-SV.jpg?v=1791629829"},{"product_id":"bendixking-ky-196a","title":"BendixKing KY 196A VHF COM Transceiver","description":"\u003cp\u003eBendixKing KY 196A is a panel-mounted VHF COM transceiver for 28 V aircraft with 760 channels from 118.000 to 136.975 MHz in 25 kHz steps and a transmitter output of at least 16 W. It shows the active and standby frequencies at the same time.\u003c\/p\u003e\u003cp\u003eThe active and standby frequencies and nine pilot-programmable channels are kept in non-volatile memory. Remote inputs swap the active and standby frequencies and step through the stored channels. P\/N 064-1054-30 (also written 064-01054-0030) has 25 kHz receiver selectivity; 064-1054-60 is the Silver Crown Plus version. The 14 V version with 10 W output is the KY 197A. The radio has no 8.33 kHz channel spacing.\u003c\/p\u003e\u003cp\u003eP\/N 064-01054-0030 is offered new, 064-1054-30 and 064-1054-60 serviceable\/overhauled. Warranty and release document depend on the condition and are stated in the quote. Installation in a certified aircraft ends with a release to service. Fit depends on the aircraft type and the P\/N of the installed radio.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"064-01054-0030 \/ New","offer_id":58181329518923,"sku":"064-01054-0030","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"064-1054-30 \/ Serviceable \/ Overhauled","offer_id":58181329551691,"sku":"064-1054-30-SV","price":41597.7,"currency_code":"CZK","in_stock":true},{"title":"064-1054-60 \/ Serviceable \/ Overhauled","offer_id":58181329584459,"sku":"064-1054-60-SV","price":35698.95,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/064-01054-0030.jpg?v=1791629840"},{"product_id":"bendixking-radio-rack-mounting-tray","title":"BendixKing 047-3374-02 Avionics Radio Rack Mounting Tray","description":null,"brand":"BendixKing","offers":[{"title":"047-3374-02 \/ Serviceable \/ Overhauled","offer_id":58181331026251,"sku":"047-3374-02-SV","price":834.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/047-3374-02-SV__4.jpg?v=1795180620"},{"product_id":"collins-aerospace-ali-80a","title":"Collins Aerospace ALI-80A Barometric Altimeter","description":"\u003cp\u003eCollins ALI-80A is a panel-mounted barometric altimeter for Collins air data systems. It takes digital altitude data from the air data computer and shows altitude from −1000 to +50,000 ft on a pointer and a numeric counter.\u003c\/p\u003e\u003cp\u003eThe barometric setting is entered on the instrument within 22.00 to 32.00 inHg and is shown on a separate readout. The ALI-80A family has versions with black or gray bezel, 5 V or 28 V supply, white or blue-white lighting and, in some versions, HIRF protection. The case measures 86 × 86 × 235 mm and weighs 1.4 kg.\u003c\/p\u003e\u003cp\u003eThe shop item is P\/N 622-3975-014; its condition and release document are stated in the quote. Installation in a certified aircraft ends with a release to service. Fit depends on the P\/N with dash number and the installed air data computer.\u003c\/p\u003e","brand":"Collins Aerospace","offers":[{"title":"622-3975-014-OH \/ Overhauled","offer_id":58181334434123,"sku":"622-3975-014-OH","price":41702.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/622-3975-014-OH.jpg?v=1791629849"},{"product_id":"garmin-gdu-1042","title":"Garmin GDU 1042 10.4-inch Multi-Function Display","description":"\u003cp\u003eGarmin GDU 1042 is a 10.4-inch multi-function display (MFD) of the G1000 integrated flight deck. Compared with the GDU 1040, it has an AFCS keypad in the lower left of the bezel for the GFC 700 autopilot modes and an internal 35 W heater that switches on below 15 °C. Garmin documents the GDU 1042 as the MFD in G1000 installations with the GFC 700, for example in the Diamond DA40 and the Cessna 350\/400.\u003c\/p\u003e\u003cp\u003eThe display exchanges data with the GDU 1040 PFD and the GIA 63 integrated avionics units over the High-Speed Data Bus (HSDB); attitude and air data arrive over ARINC 429. In normal operation it shows engine and airframe data, and in reversionary mode also the flight instruments. SD card slots in the bezel are used for software and database loading.\u003c\/p\u003e\u003cp\u003eP\/N 011-01080-00 is offered as a serviceable overhauled unit. Garmin Service Bulletin 0823 covers the CRS\/BARO knobs of GDU 1042 units within a listed serial number range. The display mounts flush in the instrument panel with four ¼-turn fasteners. After a replacement display is installed, the software and the aviation database are loaded and the aircraft is released to service with a Certificate of Release to Service. Fit depends on the P\/N from the data plate of the installed unit and the aircraft type.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"011-01080-00 \/ Serviceable \/ Overhauled","offer_id":58181373624651,"sku":"011-01080-00-SV","price":114680.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/011-01080-00.jpg?v=1791724075"},{"product_id":"garmin-sl-30","title":"Garmin SL30 NAV\/COM Radio","description":"\u003cp\u003eGarmin SL30 is a slimline panel-mount NAV\/COM, originally sold as the Apollo SL30. It combines a 760-channel VHF COM transceiver with 8 W carrier power and a 200-channel VOR\/LOC receiver with glideslope and DME display in a case 33 mm high and 159 mm wide. Garmin names P\/N 430-6040-303 for helicopter installations.\u003c\/p\u003e\u003cp\u003eThe COM covers 118.000–136.975 MHz with 25 kHz channel spacing; 8.33 kHz spacing is not available. The radio monitors the standby COM or NAV frequency, decodes the Morse station identifier and has a built-in CDI, a two-place VOX intercom and 200 stored channels. The NAV receiver drives most CDI, HSI and autopilot systems, and serial interfaces connect a DME, a GPS and a multifunction display. The unit runs on 10–36 V DC and is approved to TSO-C37d\/C38d (COM) and TSO-C34e\/C36e\/C40c (NAV).\u003c\/p\u003e\u003cp\u003e430-6040-303 is offered as a serviceable\/overhauled unit; warranty and release document are stated in the quote. In an existing SL30 installation the unit slides into the installed mounting frame; the depth behind the panel is 291 mm including frame and connectors. For helicopters Garmin requires mounting tube 310-5197-00 and connector plate 310-5192-01. A certified aircraft needs an approved modification and a Certificate of Release to Service for a new installation. Fit depends on the aircraft type and whether a mounting frame and connector kit are needed.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"430-6040-303 \/ Serviceable \/ Overhauled","offer_id":58181434573131,"sku":"430-6040-303-SV","price":55126.95,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/430-6040-303-SV.jpg?v=1790587254"},{"product_id":"te-connectivity-w23","title":"TE Connectivity W23-X1A1G Thermal Circuit Breaker","description":"\u003cp\u003eTE Connectivity W23-X1A1G is a single-pole push\/pull thermal circuit breaker from the Potter \u0026amp; Brumfield W23 series, with series trip. The black button carries a white amp marking and a white band that shows when the breaker has tripped. It is available here in 3, 4, 5, 15, 20, 30 and 50 A ratings; the P\/N suffix is the rating. The breaker mounts through a 3\/8-24 threaded bushing in a 9.53–9.80 mm hole, with two hex nuts and a lock washer installed, has two #8-32 screw terminals at 90° to each other and weighs less than 57 g.\u003c\/p\u003e\u003cp\u003eTE specifies a maximum of 50 V DC or 240 V AC (up to 400 Hz). The breaker carries 100 % of its rating continuously and must trip at 135 % within one hour; it is trip-free, cannot be reset against an overload and can also serve as an on\/off switch. Interrupting capacity is 1,000 A at 240 V AC with 4× series fuse protection (30–50 A models also 1,000 A at 50 V DC), and 2,000 A at 50 V DC without it for 0.5–25 A models. The W23 is UL 1077 recognized and CSA accepted as a supplementary protector; a TSO or ETSO is not listed. The right version depends on the current rating.\u003c\/p\u003e","brand":"TE Connectivity","offers":[{"title":"15 A","offer_id":58181500272971,"sku":"W23X1A1G15","price":607.13,"currency_code":"CZK","in_stock":true},{"title":"20 A","offer_id":58181500305739,"sku":"W23X1A1G20","price":706.69,"currency_code":"CZK","in_stock":true},{"title":"3 A","offer_id":58181500338507,"sku":"W23X1A1G3","price":662.98,"currency_code":"CZK","in_stock":true},{"title":"4 A","offer_id":58181500404043,"sku":"W23X1A1G4","price":1352.68,"currency_code":"CZK","in_stock":true},{"title":"5 A","offer_id":58181500436811,"sku":"W23X1A1G5","price":715.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/W23X1A1G15__1.jpg?v=1793880557"},{"product_id":"te-connectivity-w31","title":"TE Connectivity W31","description":null,"brand":"TE Connectivity","offers":[{"title":"1 A","offer_id":58181514363211,"sku":"W31X2M1G1","price":932.54,"currency_code":"CZK","in_stock":true},{"title":"10 A","offer_id":58181514395979,"sku":"W31X2M1G10","price":976.77,"currency_code":"CZK","in_stock":true},{"title":"15 A","offer_id":58181514428747,"sku":"W31X2M1G15","price":1116.26,"currency_code":"CZK","in_stock":true},{"title":"2 A","offer_id":58181514461515,"sku":"W31X2M1G2","price":0.0,"currency_code":"CZK","in_stock":true},{"title":"3 A","offer_id":58181514494283,"sku":"W31X2M1G3","price":1053.97,"currency_code":"CZK","in_stock":true},{"title":"5 A","offer_id":58181514527051,"sku":"W31X2M1G5","price":808.69,"currency_code":"CZK","in_stock":true},{"title":"7,5 A","offer_id":58181514559819,"sku":"W31X2M1G7.5","price":1288.91,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/W31X2M1G5__1.jpg?v=1793880570"},{"product_id":"l3harris-0035-17004-01","title":"Acron Aviation 0035-17004-01 NGT-9000 ATAS Enablement Certificate","description":"\u003cp\u003e\u003cstrong\u003eL3Harris 0035-17004-01\u003c\/strong\u003e — an NGT-9000 ATAS enablement certificate.\u003c\/p\u003e\u003cp\u003eFor an NGT-9000 configuration that requires ATAS enablement; the installation manual notes that ATAS is available without this certificate from Release 3.2 onward.\u003c\/p\u003e\u003cp\u003eOrder only for the stated platform and feature; confirm the exact part number and current manufacturer applicability before purchase.\u003c\/p\u003e","brand":"Acron Aviation","offers":[{"title":"Default Title","offer_id":58181564760395,"sku":"0035-17004-01","price":23788.9,"currency_code":"CZK","in_stock":true}]},{"product_id":"l3harris-0035-17010-01","title":"Acron Aviation 0035-17010-01 TerrainVision Enablement for Lynx NGT-9000","description":"\u003cp\u003eAcron Aviation 0035-17010-01 is the enablement certificate that activates TerrainVision on the panel-mount Lynx NGT-9000 (P\/N 9029000-20000); the NGT-9000 installation manual lists it as \"Enablement Certificate, NGT-9000, Terrain Display Only (No Alerts)\". TerrainVision shows colour-coded terrain and land-based obstacles around the aircraft, similar to the TAWS display but without visual or aural alerts, and is not a Class B TAWS.\u003c\/p\u003e\u003cp\u003eThe function needs NGT-9000 software Release 2.1 or later and is not available on the remote-mount NGT-9000R. It is activated with a 10-digit function activation code entered with the Lynx maintenance tool (MPC\/MAT) during installation; the code is tied to the aircraft ICAO (Mode S) address and works only on that aircraft. Fit depends on the installed NGT-9000 model. An order needs the aircraft ICAO address.\u003c\/p\u003e","brand":"Acron Aviation","offers":[{"title":"Default Title","offer_id":58181564924235,"sku":"0035-17010-01","price":30607.2,"currency_code":"CZK","in_stock":true}]},{"product_id":"w1555ah2","title":"Whelen W1555AH2","description":"\u003cp\u003eWhelen 01-0770551-03 is a dual tail light for 28 V systems in horizontal mounting. Parts listings name it a tail position light head assembly, horizontal, 28 V.\u003c\/p\u003e\u003cp\u003eA certified aircraft needs approved data for the installation and a Certificate of Release to Service. Fit depends on the aircraft type and the light being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181641077067,"sku":"01-0770551-03","price":2502.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0770551-03__1.jpg?v=1793880463"},{"product_id":"sunspot-36-4596","title":"AeroLEDs SunSpot 36-4596 LED Landing Light","description":"\u003cp\u003eAeroLEDs SunSpot 36-4596 — LED aircraft light. This exact non-H P\/N is the SunSpot 36-4000 100 W landing-light variant. Part number 01-1030-4596; type: LED landing\/recognition light; power: 100 W; compatibility: use only the installation data for this exact P\/N.\u003c\/p\u003e\u003cp\u003eConfirm the exact part number, intended installation, aircraft approval and current manufacturer instructions before ordering.\u003c\/p\u003e\u003cp\u003eOne SunSpot 36-4596 P\/N 01-1030-4596; no other equipment is included.\u003c\/p\u003e","brand":"AeroLEDS","offers":[{"title":"Default Title","offer_id":58181689934155,"sku":"01-1030-4596","price":13308.18,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/aeroleds-01-1030-4596-hi.png?v=1790512341"},{"product_id":"sunspot-36lx","title":"AeroLEDs SunSpot 36LX LED Taxi Light, 01-1030-L-B","description":"\u003cp\u003eAeroLEDs SunSpot 36LX, P\/N 01-1030-L-B, is a 45 W LED taxi light that fits a standard PAR36 mount with a ring clamp. It runs on 9–40 V DC, draws 3.2 A at 14 V DC and produces 4,950 lm with a peak intensity of 15,000 cd.\u003c\/p\u003e\u003cp\u003eThe light has two screw terminals for #6 ring terminals that are not polarity-sensitive, so existing aircraft wiring, switches and breakers can be used. It has no pulse function; the version with recognition (pulse) mode is the SunSpot 36HX Taxi Light, 01-1030-H-B, and the landing version is 01-1030-L-A. The light is not field-repairable and is replaced if more than two LEDs fail; AeroLEDs specifies a functional check every 50 hours. Thermal protection is built in, and the operating range is −55 to +70 °C.\u003c\/p\u003e\u003cp\u003eAeroLEDs lists 01-1030-L-B in the Master Drawing List of FAA STC SA02386AK, and the SunSpot 36 LX holds FAA PMA. For aircraft types on that AML that EASA has approved, EASA STC 10070175 is the approval path. The installation keeps at least 4 in (102 mm) clearance from exhaust components and 24 in (610 mm) from remote compass sensors, followed by a compass swing, and ends with a Certificate of Release to Service. Fit depends on the aircraft type and the lamp being replaced.\u003c\/p\u003e","brand":"AeroLEDS","offers":[{"title":"Default Title","offer_id":58181690786123,"sku":"01-1030-L-B","price":5099.85,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-1030-L-B.jpg?v=1791629880"},{"product_id":"gtm-20","title":"Garmin GTM 20 Lifetime Traffic Version","description":"\u003cp\u003e\u003cstrong\u003eGarmin 010-00544-13\u003c\/strong\u003e — GTM 20, lifetime traffic version.\u003c\/p\u003e\u003cp\u003eMatch the complete part number and exact documented configuration; verify the current installation or maintenance data before order.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181698781515,"sku":"010-00544-13","price":625.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/010-00544-13.jpg?v=1791615502"},{"product_id":"garmin-010-10723-17","title":"Garmin 010-10723-17 Dual USB Vehicle Charger","description":"\u003cp\u003eGarmin 010-10723-17 is a high-speed multi-charger for a vehicle power outlet. It adds two USB 2.0 charging ports and keeps the 12 V outlet free for another device, so a phone, a tablet or other USB-powered equipment can be charged on the way.\u003c\/p\u003e\u003cp\u003eThe charger is a Garmin accessory and not an installed aircraft part.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181746458955,"sku":"010-10723-17","price":969.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/010-10723-17.jpg?v=1790589663"},{"product_id":"garmin-010-10871-00","title":"Garmin 010-10871-00 Suction Mount for GA 25 Antenna","description":"\u003cp\u003e\u003cstrong\u003eGarmin Suction Mount for GA 25\u003c\/strong\u003e — performs the manufacturer-documented function only in the compatible aircraft system.\u003c\/p\u003e\u003cp\u003esuction-cup mount for the documented GA 25 remote antenna configuration; antenna is not asserted as included.\u003c\/p\u003e\u003cp\u003eOrder only for the exact documented product and installation; verify the current manual, interfaces and approval before use.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181746950475,"sku":"010-10871-00","price":104.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/010-10871-00.jpg?v=1790589676"},{"product_id":"garmin-011-00460-10-sv","title":"Garmin 011-00460-10-SV NavData Database Card for GNS 400\/500","description":"\u003cp\u003eGarmin NavData database card for GNS 400\/500, part number 011-00460-10-SV. Before ordering, verify the exact part number and required configuration against the current product or parts documentation.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181760778571,"sku":"011-00460-10-SV","price":5212.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/011-00460-10-SV.jpg?v=1792264950"},{"product_id":"garmin-011-00583-00","title":"Garmin 011-00583-00 Connector Kit for GTX 33\/330 and GTX 328","description":"\u003cp\u003eGarmin 011-00583-00 is the connector kit for the Garmin GTX 330 Mode S transponder. Garmin’s installation manual states that the connector and associated hardware required for the single 62-pin D-subminiature connector are supplied in this kit. Garmin Software Service Bulletin 1240 also names this kit for building the test harness used to load software into the GTX 330 and GTX 33.\u003c\/p\u003e\u003cp\u003eThe transponder, the install rack 115-00294-00 and the backplate (011-00582-00 for the GTX 330, 011-00582-01 for the GTX 330D) are separate items. A quote needs the transponder model.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181761106251,"sku":"011-00583-00","price":3252.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/011-00583-00__3.jpg?v=1795180546"},{"product_id":"garmin-011-01779-01","title":"Garmin 011-01779-01 Universal Mounting Kit for GMU 22\/44","description":"\u003cp\u003eGarmin 011-01779-01 is the Universal mounting kit for compatible GMU 22\/44 magnetometers. It provides the catalogued mechanical mounting solution for the stated application.\u003c\/p\u003e\u003cp\u003eThe magnetometer, wiring and aircraft-specific installation approval are not included. Confirm geometry, location and applicable Garmin installation data before ordering.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181770477899,"sku":"011-01779-01","price":3146.4,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/011-01779-01__3.jpg?v=1795180551"},{"product_id":"garmin-011-02976-02","title":"Garmin 011-02976-02 Backplate for GTX 3X5, TNC","description":"\u003cp\u003eGarmin 011-02976-02 is the GTX 3X5 backplate assembly with a TNC transponder antenna connector and no GPS antenna connector. Garmin lists it for use in place of the BNC backplate 011-02976-00, which the standard kits of the GTX 325, GTX 335, GTX 335R, GTX 345 and GTX 345R contain, for panel, standard remote and GX000 remote mounting.\u003c\/p\u003e\u003cp\u003eVersions with an internal GPS use backplate 011-02976-01 with a GPS antenna connector, vertical remote mounting uses the 011-02976-1x backplates, and the diversity models (D\/DR) use 011-04340-xx. A certified aircraft needs an approved modification and a Certificate of Release to Service after installation. Fit depends on the transponder model and the antenna connector type.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181798854987,"sku":"011-02976-02","price":2051.7,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/011-02976-02__3.jpg?v=1795180578"},{"product_id":"garmin-011-02976-11","title":"Garmin 011-02976-11 Vertical-Mount Backplate for GTX 335R\/345R with GPS","description":"\u003cp\u003eGarmin 011-02976-11 is the GTX 3X5 backplate assembly for vertical remote mounting of the transponder versions with internal GPS, with a BNC transponder antenna connector and a TNC GPS antenna connector. Garmin includes it in the vertical-mount standard kits GTX 335R with GPS (010-01215-42) and GTX 345R with GPS (010-01217-42 and 010-01217-47), in which the unit is mounted on the vertical remote mount 011-03762-00 with connector kit 011-02977-00 (GTX 335R) or 011-02977-01 (GTX 345R) and the configuration module 011-00979-03.\u003c\/p\u003e\u003cp\u003eGTX 335R and GTX 345R units without internal GPS use the vertical-mount backplates 011-02976-10 (BNC) or 011-02976-12 (TNC). On a certified aircraft the installation needs an approved modification and a Certificate of Release to Service. Fit depends on the transponder model and its GPS option.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181798953291,"sku":"011-02976-11","price":2548.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/011-02976-11__3.jpg?v=1795180590"},{"product_id":"garmin-011-03941-00","title":"Garmin 011-03941-00 Install Tray for GEA 110","description":"\u003cp\u003eGarmin 011-03941-00 is the install tray for the GEA 110 engine adapter. The tray mounts to the structure with six #8 screws and washers, and its ratcheting latch locks the GEA 110 in place before the J1101 and J1102 connectors are attached. With the tray and connectors the GEA 110 measures 121.9 × 162.6 × 41.4 mm (4.8 × 6.4 × 1.63 in, W × H × D); the tray weighs 0.285 kg (0.628 lb).\u003c\/p\u003e\u003cp\u003eThe tray is one of the documented mounting options; the GEA 110 can also be bolted directly to the airframe, an equipment shelf or the back of a GDU 1060 with four #6 bolts. Garmin includes one tray per GEA 110 in the TXi EIS standalone kits and treats P\/N 011-03941-01 as equivalent. The GEA 110 and its connector kit are separate items. Fit depends on the GEA 110 mounting location.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181822972235,"sku":"011-03941-00","price":4457.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/011-03941-00__3.jpg?v=1795180598"},{"product_id":"garmin-011-04994-00","title":"Garmin 011-04994-00 Backplate Assembly for GNC 355\/355A","description":"\u003cp\u003eGarmin 011-04994-00 is the backplate assembly for the GNC 355 and GNC 355A 2-inch GPS\/COM navigators (GNC 355 with 25 kHz COM, GNC 355A also with 8.33 kHz channel spacing). The backplate holds the two rear D-sub connectors of the connector kit and carries the coaxial connections: TNC for the GPS antenna and BNC for the COM antenna. The four #4-40 pan head screws that secure it to the rack are part of the assembly.\u003c\/p\u003e\u003cp\u003eGarmin lists it in GNC 355 standard kit 010-02232-01 together with installation rack 115-03127-00, connector kit 011-04779-01 and configuration module 011-00979-03, which are separate P\/Ns. With the rear connectors fitted, the backplate screw heads pass through the keyed holes of the rack, the backplate slides into place until it clicks, and the screws are torqued to 8 ±1 in-lb. A certified aircraft needs approved installation data and a Certificate of Release to Service. Fit depends on the navigator model and the unit P\/N.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58181827559755,"sku":"011-04994-00","price":3421.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/011-04994-00__3.jpg?v=1795180607"},{"product_id":"bendixking-050-02093-0001","title":"BendixKing 050-02093-0001 Installation Kit for KFS 586A ADF Control Unit, Crimp","description":"\u003cp\u003eBendixKing 050-02093-0001 is the crimp-pin installation kit for the KFS 586A ADF control unit. It contains a 29-position D-sub receptacle housing, 28 crimp sockets for 20 AWG wire, a female polarizing pin, a 29-position plastic hood with V-lock and two 6-32 anchor nuts. Kit 050-02093-0000 is the solder version with a 29-position PC connector.\u003c\/p\u003e\u003cp\u003eThe KFS 586A is the frequency and function control unit for the KDF 806 ADF receiver, in single or tandem installation or as part of a frequency management system. The ADF indicator is not part of the kit. Fit depends on the KFS 586A P\/N and the aircraft type.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"Default Title","offer_id":58181886574923,"sku":"050-02093-0001","price":22014.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/050-02093-0001__1.jpg?v=1793880472"},{"product_id":"bendixking-050-02600-0000","title":"BendixKing 050-02600-0000 Crimp Installation Kit for KY 96A\/97A\/196A\/197A","description":"\u003cp\u003e\u003cstrong\u003eBendixKing 050-02600-0000\u003c\/strong\u003e — a crimp installation kit for KY 96A\/97A\/196A\/197A transceivers.\u003c\/p\u003e\u003cp\u003eShared installation-kit P\/N documented for the listed KY transceiver models; verify the exact radio configuration.\u003c\/p\u003e\u003cp\u003eSelect by the exact part number and confirm the applicable installation data before ordering.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"Default Title","offer_id":58181887656267,"sku":"050-02600-0000","price":7464.7,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/050-02600-0000__2.jpg?v=1795180634"},{"product_id":"bendixking-050-03643-0000","title":"BendixKing 050-03643-0000 Installation Kit for KMG 7010 Magnetometer","description":"\u003cp\u003eBendixKing 050-03643-0000 is the installation kit for the KMG 7010 magnetometer (P\/N 065-00189-0101). The KMG 7010 is a three-axis solid-state magnetometer that sends magnetic heading data over CAN bus to the KG 71EXP ADAHRS of the xVue Touch system or to the Honeywell AH-1000 AHRS. It mounts inside the wing or empennage, away from electromagnetic interference, and connects through a male 9-pin D-sub connector.\u003c\/p\u003e\u003cp\u003eIn a certified aircraft the installation needs approved data and a Certificate of Release to Service. Fit depends on the KMG 7010 P\/N and the aircraft type.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"Default Title","offer_id":58181898207563,"sku":"050-03643-0000","price":6042.62,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/050-03643-0000__1.jpg?v=1793880478"},{"product_id":"kmg-7010","title":"BendixKing KMG 7010 Magnetometer","description":"\u003cp\u003eBendixKing KMG 7010 is a three-axis solid-state magnetometer. It senses the Earth’s magnetic field and sends the data over a CAN bus to the attitude and heading reference system, which uses it to stabilise the long-term heading output. The unit is installed inside the wing or empennage, away from sources of magnetic interference.\u003c\/p\u003e\u003cp\u003eIn the BendixKing xVue Touch system the KMG 7010 supplies magnetic heading data to the KG 71EXP ADAHRS; the Honeywell AH-1000 AHRS also interfaces with it. The connector is a male 9-pin D-sub. Several mounting orientations are permitted, and the installation includes a magnetometer calibration. Nominal current draw is 80 mA at 25 °C, and the unit holds TSO-C6d\/ETSO-C6d (partial).\u003c\/p\u003e\u003cp\u003eThe KMG 7010 is used within the installation data of its heading system; installation in a certified aircraft ends with a release to service. Fit depends on the P\/N, the AHRS model and the aircraft type.\u003c\/p\u003e","brand":"BendixKing","offers":[{"title":"Default Title","offer_id":58181916885323,"sku":"065-00189-0101","price":117266.44,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/065-00189-0101.jpg?v=1791721300"},{"product_id":"0711-153","title":"Eldon James 0711.153 Nylon Elbow Fitting, 6.35 mm","description":"\u003cp\u003e\u003cstrong\u003eEldon James 0711.153\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eItem type: 6.35 mm nylon elbow fitting.\u003c\/p\u003e\u003cp\u003eThis product record is identified by manufacturer Eldon James and part number 0711.153. Order using the complete part number and confirm that it matches the required configuration before purchase.\u003c\/p\u003e","brand":"Eldon James","offers":[{"title":"Default Title","offer_id":58181923373387,"sku":"0711.153","price":166.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/0711.153.jpg?v=1792264740"},{"product_id":"premium-flight","title":"Jeppesen Premium Flight","description":"\u003cp\u003e\u003cstrong\u003eJeppesen 10002303-SV\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eItem type: Premium Flight pilot bag.\u003c\/p\u003e\u003cp\u003eThis product record is identified by manufacturer Jeppesen and part number 10002303-SV. Order using the complete part number and confirm that it matches the required configuration before purchase.\u003c\/p\u003e","brand":"Jeppesen","offers":[{"title":"Default Title","offer_id":58182115656011,"sku":"10002303-SV","price":2914.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/039-10002303-SV.jpg?v=1791814420"},{"product_id":"110-320","title":"Artex 110-320 ELT Rod Antenna, Tri-Band, Dual Input","description":"\u003cp\u003eArtex 110-320 is a tri-band ELT rod antenna for 121.5, 243 and 406 MHz with dual input: a BNC female connector for 121.5\/243 MHz and a TNC female connector for 406 MHz, with 10 dB isolation between the ports. It is vertically polarized and omnidirectional, 50 Ω, rated for 25 W RF, 15.50 in high and 0.45 lb, for −55 to +85 °C and altitudes up to 55,000 ft. The glass-reinforced polyester housing is designed to meet the EUROCAE ED-62 flame test.\u003c\/p\u003e\u003cp\u003eACR Electronics lists 110-320 as an approved dual-input antenna in the manuals of the ARTEX C406-2 and B406-4 ELTs and ships it in the C406-2HM system pack 455-5049 and the G406-4 system pack 455-5019. The black version is 110-320-04; the gasket B31725 is ordered separately. This item is offered in serviceable condition (SKU 110-320-SV).\u003c\/p\u003e\u003cp\u003eIn a certified aircraft the antenna is installed according to approved data and the work ends with a Certificate of Release to Service. Fit depends on the ELT model and P\/N and the aircraft type.\u003c\/p\u003e","brand":"Artex (ACR Electronics)","offers":[{"title":"Default Title","offer_id":58182312264011,"sku":"110-320-SV","price":15638.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/110-320-SV.jpg?v=1790591851"},{"product_id":"garmin-115-00411-00","title":"Garmin 115-00411-00 Mounting Rack for GEA 71","description":"\u003cp\u003eGarmin 115-00411-00 is the GEA 71 Modular Unit Rack: the rack that holds the Garmin GEA 71 engine\/airframe unit when the unit is mounted on the G1000 main system rack. It is fastened to the main system rack with a G1000 rack nutplate kit, preferably 011-00915-00 (alternative 011-01148-00). During installation the back plate with both connectors is fitted into the rack first, then the GEA 71 is inserted.\u003c\/p\u003e\u003cp\u003eThe same rack is used for the GEA 71B and GEA 71B Enhanced, and it is the modular rack option for the GDL 69 and GDL 69A weather datalink receivers. The standalone rack 115-00658-00 is a different part. The GEA 71 unit, back plate, connector kit and nutplate kit are not included. Installation in a certified aircraft is part of an approved modification, followed by a Certificate of Release to Service.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58182342279499,"sku":"115-00411-00","price":1367.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/115-00411-00__5.jpg?v=1795180641"},{"product_id":"garmin-115-00481-10","title":"Garmin 115-00481-10 Modified Installation Rack for GMU 44 and GMU 22","description":"\u003cp\u003eGarmin 115-00481-10 is the modified installation rack for the GMU 44 magnetometer, also listed by Garmin as the installation rack of the GMU 22 magnetometer. In the GRS 77\/GMU 44 installation manual Garmin recommends the GMU 44 011-00870-10 and 011-00870-20 with this rack for new TC and STC approvals. Helicopter installations may use only these two GMU 44 versions and must use this rack, with hole set B for high-vibration installations. The standard GMU 44 rack is 115-00481-00.\u003c\/p\u003e\u003cp\u003eIn the G3X\/G3X Touch installation manual the rack is part of the GMU 22 connector kit 011-00871-10. For the GMU 22 Garmin requires nonmagnetic mounting materials, a rack levelled within 3.0° of the in-flight level cruise attitude and aligned within 0.5° of the aircraft longitudinal axis. On a certified aircraft the rack is installed as part of an approved modification, followed by a Certificate of Release to Service. Fit depends on the magnetometer model.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58182343426379,"sku":"115-00481-10","price":2327.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/115-00481-10__2.jpg?v=1795180659"},{"product_id":"garmin-115-01294-00","title":"Garmin 115-01294-00 Mounting Rack for GTN 7XX","description":"\u003cp\u003eGarmin 115-01294-00 is the fixed-wing mounting rack for the GTN 7XX navigators: GTN 725 and GTN 750 and their Xi versions; Garmin's dealer catalog lists it as the GTN 750 Series Mounting Rack. The GTN 725 and GTN 750 installation kits combine it with the model-specific backplate and connector kit, the configuration module and the product information kit.\u003c\/p\u003e\u003cp\u003eGarmin supplies GTN 725Xi and 750Xi units either as a system with rack, backplate, connector kit and configuration module, or as a unit-only kit without them for upgrades from an original GTN. Helicopter installations use the helicopter rack 115-01294-A0 instead. Fit depends on the GTN model and the aircraft type.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58182357778763,"sku":"115-01294-00","price":11893.4,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/115-01294-00__1.jpg?v=1793880494"},{"product_id":"garmin-115-01951-00","title":"Garmin 115-01951-00 GMU Magnetometer Adapter Plate","description":"\u003cp\u003eGarmin 115-01951-00 is the GMU adapter plate assembly from Garmin's magnetometer installation drawings for the Beechcraft King Air 200\/B200 (005-00421-39) and King Air 300\/B300 (005-00629-49). In the horizontal-stabilizer installation one plate is used on each side of the aircraft: it carries the modified GMU 44 install rack 115-00481-10 and mounts the GMU 44 magnetometer in the existing flux valve mounting dish. The drawings call for a clearance slot in the dish aligned with the slot in the plate, non-magnetic screws and an electrical bond of 2.5 mΩ or less to the structure, checked after installation.\u003c\/p\u003e\u003cp\u003eFor the GMU 44B the drawings allow a field-fabricated part or the GMU 44B adapter plate 115-04023-00, and the King Air 300\/B300 drawing also a 115-01951-00 modified to Garmin's detail. The plate is installed only as part of that Garmin installation data, followed by a Certificate of Release to Service. Fit depends on the aircraft model, the serial number and the magnetometer model.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":58182363513163,"sku":"115-01951-00","price":4184.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/115-01951-00__3.jpg?v=1793880501"}],"url":"https:\/\/shop.airteam.eu\/collections\/black-friday-2026-vyprodej.oembed","provider":"AIR TEAM","version":"1.0","type":"link"}