{"title":"Dynon","description":"\u003cp\u003eThis collection covers Dynon products offered in the AIR TEAM shop: SkyView HDX flight displays, an engine monitoring module, autopilot servos with mounting kits, AOA\/pitot probes, EGT, CHT and air temperature sensors, wiring harnesses, connector kits and backup batteries.\u003c\/p\u003e\u003cp\u003eBuilders and owners of experimental and light aircraft, including Van's RV types, use them to equip and maintain a Dynon panel.\u003c\/p\u003e\u003cp\u003eCheck the part number, the engine type for probes (Rotax or Jabiru versions) and the supply voltage of heated probes before ordering. The part numbers are shown in the product titles.\u003c\/p\u003e","products":[{"product_id":"dynon-hdx1100","title":"Dynon SkyView HDX1100 10-inch Flight Display","description":"\u003cp\u003eDynon SkyView HDX1100 (SV-HDX1100) is a 10-inch touchscreen flight display for the SkyView HDX system in experimental and light sport aircraft. The screen has 1280 × 800 pixels, with backlit knobs and buttons on an angled control panel below it. The display measures 262 × 179.5 × 79 mm, weighs 1.50 kg and draws 2.4 A at 12 V or 1.2 A at 24 V from a 10–30 V DC supply.\u003c\/p\u003e\u003cp\u003eSV-HDX800, SV-HDX1100 and SV-HDX1200 have identical functions and differ only in screen size; a system takes up to three HDX displays. Flight instruments, engine monitoring and GPS navigation need the matching SkyView modules: ADAHRS, EMS and a GPS receiver. P\/N 102864-000 is the display only, without harness; Dynon supplies it with SV-SYNVIS-280 synthetic vision and SV-MAP-270 navigation mapping.\u003c\/p\u003e\u003cp\u003eIn a panel already cut for an SV-D900, SV-D1000 or SV-D1000T, the HDX1100 uses the existing cut-out with a filler panel plate, Dynon P\/N 102897-000, which current units no longer include. Dynon offers this display for experimental and light sport aircraft, not for certified aircraft. Fit depends on the aircraft type and the SkyView modules installed or planned.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"102864-000 \/ New","offer_id":58181357273419,"sku":"102864-000","price":106169.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/102864-000.jpg?v=1790587944"},{"product_id":"dynon-hdx1200","title":"Dynon SkyView HDX1200 12-inch Flight Display","description":"\u003cp\u003eDynon SkyView HDX1200 (SV-HDX1200) is a 12-inch touchscreen flight display for the SkyView HDX system in experimental and light sport aircraft. The screen has 1280 × 800 pixels, with backlit knobs and buttons on an angled control panel below it. The display measures 279 × 212 × 90 mm, weighs 2.04 kg and draws 2.2 A at 12 V or 1.1 A at 24 V from a 10–30 V DC supply.\u003c\/p\u003e\u003cp\u003eSV-HDX800, SV-HDX1100 and SV-HDX1200 have identical functions and differ only in screen size. A system takes up to three HDX displays in any combination, and the displays share settings over SkyView Network. Flight instruments, engine monitoring and GPS navigation need the matching SkyView modules: ADAHRS, EMS and a GPS receiver. P\/N 104769-000 is the display only, without harness; Dynon lists it with SV-SYNVIS-280 synthetic vision.\u003c\/p\u003e\u003cp\u003eThe HDX1200 mounts flush on the instrument panel with the Universal Module Mounting Tray; its screw holes are drilled during installation because they do not match the tray holes. Dynon offers this display for experimental and light sport aircraft, not for certified aircraft. Fit depends on the aircraft type and the SkyView modules installed or planned.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"104769-000 \/ New","offer_id":58181357470027,"sku":"104769-000","price":122683.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/104769-000.jpg?v=1790587949"},{"product_id":"dynon-hdx800","title":"Dynon SkyView HDX800 7-inch Flight Display","description":"\u003cp\u003eDynon SkyView HDX800 (SV-HDX800) is a 7-inch touchscreen flight display for the SkyView HDX system in experimental and light sport aircraft. The screen has 1280 × 800 pixels, with backlit knobs and buttons on an angled control panel below it. The display measures 194 × 142 × 81.5 mm, weighs 1.18 kg and draws 2.1 A at 12 V or 1.0 A at 24 V from a 10–30 V DC supply.\u003c\/p\u003e\u003cp\u003eSV-HDX800, SV-HDX1100 and SV-HDX1200 have identical functions and differ only in screen size. A system takes up to three HDX displays in any combination, and the displays share settings over SkyView Network. Flight instruments, engine monitoring and GPS navigation need the matching SkyView modules: ADAHRS, EMS and a GPS receiver. P\/N 102865-000 is the display only, without harness; Dynon supplies it with SV-SYNVIS-280 synthetic vision and SV-MAP-270 navigation mapping.\u003c\/p\u003e\u003cp\u003eThe HDX800 needs a 177 × 136 mm panel cut-out, the same as the SV-D600 and SV-D700, and about 61 mm of free space behind the panel. The optional 7-inch avionics tray, Dynon P\/N 104067-000, carries the HDX800 together with an SV-BAT-320 backup battery and a COM radio or transponder module. Dynon offers this display for experimental and light sport aircraft, not for certified aircraft. Fit depends on the aircraft type and the SkyView modules installed or planned.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"102865-000 \/ New","offer_id":58181358518603,"sku":"102865-000","price":73418.4,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/102865-000.jpg?v=1791620132"},{"product_id":"dynon-100024-000","title":"Dynon 100024-000 Flush Mount Bracket for D10 Series","description":"\u003cp\u003eDynon D10 Series Flush Mount Bracket — flush-mount bracket. Bracket supports flush installation of compatible Dynon D10-series instruments.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 100024-000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e flush-mount bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Dynon D10 series; verify exact instrument and panel drawing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, revision, connector and approved application before ordering or installation. Follow current manufacturer and aircraft data.\u003c\/p\u003e\u003cp\u003eOne Dynon D10 Series Flush Mount Bracket; parent equipment, mating hardware and installation materials are not included unless explicitly listed.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182118244683,"sku":"100024-000","price":859.7,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100024-000.jpg?v=1790590112"},{"product_id":"dynon-100096-000","title":"Dynon 100096-000 Internal Backup Battery, Li-Ion","description":"\u003cp\u003e\u003cstrong\u003eDynon Internal Backup Battery\u003c\/strong\u003e — performs the manufacturer-documented function within the compatible Dynon system.\u003c\/p\u003e\u003cp\u003eUse only with the exact documented system and installation; verify current manuals, interfaces and approval before order.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182122176843,"sku":"100096-000","price":6000.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100096-000.jpg?v=1790589770"},{"product_id":"dynon-100141-000","title":"Dynon 100141-000 Unheated AOA\/Pitot Probe","description":"\u003ch2\u003eDynon unheated AOA\/Pitot probe\u003c\/h2\u003e\u003cp\u003eUnheated underwing AOA and pitot probe for Dynon SkyView and D10\/D100-series systems. Part number: 100141-000.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUnheated underwing AOA and pitot probe for Dynon SkyView and D10\/D100-series systems.\u003c\/li\u003e\n\u003cli\u003eExact identity: Dynon unheated AOA\/Pitot probe\u003c\/li\u003e\n\u003cli\u003ePart number: 100141-000\u003c\/li\u003e\n\u003cli\u003eunheated\u003c\/li\u003e\n\u003cli\u003eunderwing L-shaped probe\u003c\/li\u003e\n\u003cli\u003eapproximately 0.36 lb \/ 0.16 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eDynon unheated AOA\/Pitot probe — Part number 100141-000.\u003c\/p\u003e\u003ch3\u003ePurpose and selection\u003c\/h3\u003e\u003cp\u003eUnheated underwing AOA and pitot probe for Dynon SkyView and D10\/D100-series systems.\u003c\/p\u003e\u003ch3\u003eCompatibility and installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, parent equipment, installation eligibility, connector and required interfaces against current approved data before ordering.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182129680715,"sku":"100141-000","price":7737.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100141-000.jpg?v=1790587894"},{"product_id":"dynon-100399-000","title":"Dynon 100399-000 Engine Sensor Main Wire Harness, 6 ft","description":"\u003cp\u003eDynon Engine Sensor Main Wire Harness — engine-sensor wiring harness. Six-foot main harness connects supported engine sensors to a compatible Dynon engine-monitoring installation.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 100399-000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e engine-sensor wiring harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \/ format:\u003c\/strong\u003e 6 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e Main engine-sensor harness; connector and pin assignments per current installation guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, revision, connector and approved application before ordering or installation. Follow current manufacturer and aircraft data.\u003c\/p\u003e\u003cp\u003eOne Dynon Engine Sensor Main Wire Harness; parent equipment, mating hardware and installation materials are not included unless explicitly listed.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182174769483,"sku":"100399-000","price":4886.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100399-000.jpg?v=1790590115"},{"product_id":"dynon-100399-004","title":"Dynon 100399-004 2-Cylinder EGT Harness, 6 ft, for EMS and FlightDEK","description":"\u003ch2\u003eDynon 2-cylinder EGT harness\u003c\/h2\u003e\u003cp\u003eSix-foot two-cylinder EGT thermocouple harness for Dynon EMS and FlightDEK systems. Part number: 100399-004.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSix-foot two-cylinder EGT thermocouple harness for Dynon EMS and FlightDEK systems.\u003c\/li\u003e\n\u003cli\u003eExact identity: Dynon 2-cylinder EGT harness\u003c\/li\u003e\n\u003cli\u003ePart number: 100399-004\u003c\/li\u003e\n\u003cli\u003e2 EGT channels\u003c\/li\u003e\n\u003cli\u003e6 ft length\u003c\/li\u003e\n\u003cli\u003e25-pin thermocouple harness\u003c\/li\u003e\n\u003cli\u003eapproximately 0.22 lb \/ 0.10 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eDynon 2-cylinder EGT harness — Part number 100399-004.\u003c\/p\u003e\u003ch3\u003ePurpose and selection\u003c\/h3\u003e\u003cp\u003eSix-foot two-cylinder EGT thermocouple harness for Dynon EMS and FlightDEK systems.\u003c\/p\u003e\u003ch3\u003eCompatibility and installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, parent equipment, installation eligibility, connector and required interfaces against current approved data before ordering.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182175719755,"sku":"100399-004","price":3327.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100399-004.jpg?v=1791686882"},{"product_id":"ft-61","title":"Dynon 100403-003 FT-60 Fuel Flow Transducer, 1 in NPT","description":"\u003cp\u003eElectronics International FT-60 Fuel Flow Transducer — fuel-flow transducer. Inline transducer measures fuel flow for compatible engine-monitoring systems.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 100403-003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e fuel-flow transducer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e 1\/4 in female NPT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange:\u003c\/strong\u003e 0.6–70+ GPH\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, revision, connector and approved application before ordering or installation. Follow current manufacturer and aircraft data.\u003c\/p\u003e\u003cp\u003eOne Electronics International FT-60 Fuel Flow Transducer; parent equipment, mating hardware and installation materials are not included unless explicitly listed.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182176080203,"sku":"100403-003","price":8623.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/dynon-100403-003-ft-60.jpg?v=1790494724"},{"product_id":"dynon-100404-000","title":"Dynon 100404-000 CHT Probe, Bayonet 3\/8-24 UNF","description":"\u003cp\u003eDynon 100404-000 is a Type J thermocouple cylinder head temperature (CHT) probe with an adjustable bayonet, 3\/8-24 UNF, for Lycoming, Continental and Superior engines. Dynon uses it in the EMSKIT-L4C, EMSKIT-L4F, EMSKIT-L6C and EMSKIT-L6F engine sensor kits for SkyView and lists it for the UL Power 350i\/350iS. Each probe comes with a bayonet adapter and weighs 0.08 lb (40 g).\u003c\/p\u003e\u003cp\u003eThe bayonet adapter screws into the CHT well near the lower spark plug as the engine manual describes; the locking collar on the spring is set so that the probe tip presses against the bottom of the well. The leads plug into the matching colour pair of the CHT\/EGT thermocouple harness of the SkyView SV-EMS-220\/221 engine monitoring module. An extension needs Type J thermocouple wire and no junction across a temperature change such as the firewall. With Advanced Flight displays the probe works only through an SV-EMS-220\/221.\u003c\/p\u003e\u003cp\u003eDynon sells the probe as an accessory for experimental aircraft. Fit depends on the engine type, the number of cylinders and the Dynon engine monitor.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182176407883,"sku":"100404-000","price":1644.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100404-000.jpg?v=1790591395"},{"product_id":"dynon-100405-000","title":"Dynon 100405-000 Type-K EGT Thermocouple, Clamp 1-2 in","description":"\u003cp\u003eDynon EGT Thermocouple 100405-000 — type-K EGT thermocouple. Clamp-mounted type-K probe measures exhaust-gas temperature on supported engine-monitoring installations.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 100405-000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e type-K EGT thermocouple\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \/ format:\u003c\/strong\u003e Hose clamp range 1.00–2.25 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Lycoming \/ Continental \/ Superior sensor-kit applications listed by Dynon\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, revision, connector and approved application before ordering or installation. Follow current manufacturer and aircraft data.\u003c\/p\u003e\u003cp\u003eOne Dynon EGT Thermocouple 100405-000; parent equipment, mating hardware and installation materials are not included unless explicitly listed.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182176637259,"sku":"100405-000","price":1464.4,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100405-000.jpg?v=1790589763"},{"product_id":"dynon-100405-001","title":"Dynon 100405-001 EGT Probe, Hose Clamp 0.75–1.25 in, for Rotax","description":"\u003cp\u003eDynon 100405-001 is a Type K thermocouple exhaust gas temperature (EGT) probe with a 0.75–1.25 in hose clamp for Rotax engines. Dynon supplies two of these probes in the EMSKIT-RTX engine sensor kit for the Rotax 912 ULS. The probe weighs 0.09 lb (40 g).\u003c\/p\u003e\u003cp\u003eOn carbureted Rotax 912 engines, Dynon places the two EGT probes on the exhaust manifolds of the two rear, parallel cylinders. The probe goes into a 1\/8 in hole and is held by the clamp; Dynon suggests a safety wire. The leads plug into the labelled pair of the SkyView SV-EMS-220\/221 thermocouple harness, and an extension needs Type K wire with no junction across a temperature change such as the firewall. With Advanced Flight displays the probe works only through an SV-EMS-220\/221.\u003c\/p\u003e\u003cp\u003eDynon sells the probe as an accessory for experimental aircraft. Fit depends on the engine model and the Dynon engine monitor.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182176833867,"sku":"100405-001","price":1513.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100405-001.jpg?v=1790591398"},{"product_id":"dynon-100405-002","title":"Dynon 100405-002 Jabiru EGT Probe, Clamp-On, 0.75-1.75 in","description":"\u003ch2\u003eDynon Jabiru EGT probe\u003c\/h2\u003e\u003cp\u003eType-K EGT probe with hose clamp for Jabiru exhaust diameters from 1.00 to 1.75 inches. Part number: 100405-002.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eType-K EGT probe with hose clamp for Jabiru exhaust diameters from 1.00 to 1.75 inches.\u003c\/li\u003e\n\u003cli\u003eExact identity: Dynon Jabiru EGT probe\u003c\/li\u003e\n\u003cli\u003ePart number: 100405-002\u003c\/li\u003e\n\u003cli\u003eType K thermocouple\u003c\/li\u003e\n\u003cli\u003e1.00–1.75 in clamp range\u003c\/li\u003e\n\u003cli\u003eapproximately 0.09 lb \/ 0.04 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eDynon Jabiru EGT probe — Part number 100405-002.\u003c\/p\u003e\u003ch3\u003ePurpose and selection\u003c\/h3\u003e\u003cp\u003eType-K EGT probe with hose clamp for Jabiru exhaust diameters from 1.00 to 1.75 inches.\u003c\/p\u003e\u003ch3\u003eCompatibility and installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, parent equipment, installation eligibility, connector and required interfaces against current approved data before ordering.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182177259851,"sku":"100405-002","price":1464.4,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100405-002.jpg?v=1790587897"},{"product_id":"dynon-100412-000","title":"Dynon 100412-000 Ammeter Shunt, 0-60 A","description":"\u003cp\u003eDynon 0–60 A Ammeter Shunt — ammeter shunt. Precision shunt provides the millivolt signal used by a compatible Dynon system to measure current.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 100412-000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e ammeter shunt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange:\u003c\/strong\u003e 0–60 A; 1 mV = 1 A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, revision, connector and approved application before ordering or installation. Follow current manufacturer and aircraft data.\u003c\/p\u003e\u003cp\u003eOne Dynon 0–60 A Ammeter Shunt; parent equipment, mating hardware and installation materials are not included unless explicitly listed.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182179094859,"sku":"100412-000","price":1061.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100412-000.jpg?v=1790589759"},{"product_id":"dynon-100433-000","title":"Dynon 100433-000 Outside Air Temperature Probe","description":"\u003cp\u003eDynon 100433-000 is the 2-wire outside air temperature probe for the Dynon EMS-D10, EMS-D120 and FlightDEK-D180. It connects directly to a general-purpose input on the 37-pin EMS harness; it does not connect to the EDC-D10A remote compass module. The probe comes with 10 ft (3 m) of cable and weighs 40 g.\u003c\/p\u003e\u003cp\u003eBoth wires are black\/white and not polarity-sensitive: one goes to ground, the other to the selected GP input. In the EMS setup the input is set to OAT, or to GP TEMP for a cabin temperature reading, with sensor type 1. When an aircraft moves to SkyView, an installed 100433-000 can remain: its wires are spliced to the wires and connector of an SV-OAT-340.\u003c\/p\u003e\u003cp\u003eThe probe mounts through a 3\/8 in hole in the skin with a nylon nut and thread locker, away from engine heat, exhaust, direct sun and a heated cabin; on RV-series aircraft the wingtip and the underside of the horizontal stabilizer are common locations. Dynon states that the EMS-D10, EMS-D120 and FlightDEK-D180 are not approved for type-certificated aircraft. For the EFIS-D10A\/D100 through the EDC-D10A, Dynon supplies the 3-wire probe 100433-001. Fit depends on the Dynon instrument model.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182181290315,"sku":"100433-000","price":1641.7,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100433-000.jpg?v=1790587906"},{"product_id":"dynon-100433-001","title":"Dynon 100433-001 Outside Air Temperature Probe","description":"\u003cp\u003eDynon 100433-001 is the 3-wire outside air temperature probe for the Dynon D10\/D100 series. It feeds the OAT to the EFIS-D10A or EFIS-D100 through the EDC-D10A remote compass module, or connects directly to a general-purpose input of the EMS-D10, EMS-D120 or FlightDEK-D180. The instruments use the OAT for density altitude and true airspeed. The probe comes with 10 ft (3 m) of cable and weighs 2.6 oz (70 g).\u003c\/p\u003e\u003cp\u003eOn the EDC-D10A, the red, yellow and blue wires go to pins 7, 2 and 8 of the D9 connector, and the EFIS is set to OAT type 2. On an EMS input the red wire stays unused, and the yellow and blue wires connect to ground and the selected input. The probe is marked with a black band near the sensor; Dynon has sold only this OAT P\/N since 2005. Until it is adjusted in the OAT menu against a reference thermometer, the reading can be up to 5 °C off.\u003c\/p\u003e\u003cp\u003eThe probe mounts through a 3\/8 in hole in the skin with a nylon nut and thread locker, away from engine heat, exhaust, direct sun and a heated cabin. Dynon designs the D10\/D100 series for experimental, LSA and ultralight aircraft only. For SkyView, Dynon offers the SV-OAT-340 probe. Fit depends on the Dynon instrument model.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182181880139,"sku":"100433-001","price":2906.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100433-001.jpg?v=1791629998"},{"product_id":"sv-oat-340","title":"Dynon SV-OAT-340 Outside Air Temperature Probe","description":"\u003cp\u003eDynon SV-OAT-340, P\/N 100433-003, measures outside air temperature for Dynon SkyView systems and connects to the two-pin OAT connector of an SV-ADAHRS-200 or SV-ADAHRS-201 module or to an SV-MAG-236 remote magnetometer. The two-wire sensor covers −40 to +66 °C (−40 to +150 °F) and weighs 0.04 kg. SkyView needs a connected OAT sensor to calculate true airspeed and winds.\u003c\/p\u003e\u003cp\u003eEvery SV-ADAHRS-200 and SV-ADAHRS-201 ships with one SV-OAT-340; a separate probe serves a second ADAHRS for full redundancy, an SV-MAG-236 or a replacement. With several probes installed, SkyView uses one at a time. The displayed value can be offset by up to ±11.1 °C (±20 °F) in the ADAHRS calibration menu. On an SV-EMS-220\/221 the probe can also be set up as a general-purpose temperature sensor, for example for cabin temperature.\u003c\/p\u003e\u003cp\u003eThe probe mounts through a 3\/8 in hole in the fuselage skin with a nylon nut and washer, away from direct sunlight, engine heat, exhaust and cabin air outlets. The wires are not polarity-sensitive and can be lengthened or shortened by splicing; the pins go into the included connector housing after routing. Dynon does not intend SkyView equipment for type-certificated aircraft; the probe is offered for SkyView systems in experimental aircraft. Fit depends on the SkyView module the probe connects to.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182182240587,"sku":"100433-003","price":2906.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100433-003.jpg?v=1791629999"},{"product_id":"dynon-100468-000","title":"Dynon 100468-000 Carburetor Air Temperature Sensor, 1\/4-28 UNF","description":"\u003cp\u003eDynon 100468-000 is a two-wire carburetor air temperature sensor with a 1\/4-28 UNF thread and a range of −50 to +150 °F (−46 to +66 °C). Dynon supplies it in the EMSKIT-L4C and EMSKIT-L6C sensor kits for carbureted Lycoming, Continental and Superior engines and lists it for the UL Power engines without CAN bus and the Rotax 914. The sensor weighs 0.13 lb (60 g).\u003c\/p\u003e\u003cp\u003eThe sensor goes into the carburetor venturi, after the main nozzle and before the throttle valve, in place of the plug below the throttle valve: on the forward side of Marvel Schebler MA-3 carburetors and on the rear of MA-4 carburetors. A carburetor without a tapped hole is removed, the lead plug drilled out and the hole tapped 1\/4-28. One wire goes to ground, the other to a general-purpose input of the SkyView SV-EMS-220\/221; Dynon recommends pin 23.\u003c\/p\u003e\u003cp\u003eDynon sells the sensor as an accessory for experimental aircraft. Fit depends on the engine type and the Dynon engine monitor.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182182994251,"sku":"100468-000","price":1641.7,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100468-000.jpg?v=1790589810"},{"product_id":"dynon-100532-000","title":"Dynon 100532-000 Unheated Boom AOA\/Pitot Probe","description":"\u003ch2\u003eDynon unheated boom AOA\/Pitot probe\u003c\/h2\u003e\u003cp\u003eUnheated boom-mount AOA and pitot probe for Dynon SkyView and D10\/D100-series systems. Part number: 100532-000.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUnheated boom-mount AOA and pitot probe for Dynon SkyView and D10\/D100-series systems.\u003c\/li\u003e\n\u003cli\u003eExact identity: Dynon unheated boom AOA\/Pitot probe\u003c\/li\u003e\n\u003cli\u003ePart number: 100532-000\u003c\/li\u003e\n\u003cli\u003eunheated\u003c\/li\u003e\n\u003cli\u003eboom mount\u003c\/li\u003e\n\u003cli\u003eapproximately 0.27 lb \/ 0.12 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eDynon unheated boom AOA\/Pitot probe — Part number 100532-000.\u003c\/p\u003e\u003ch3\u003ePurpose and selection\u003c\/h3\u003e\u003cp\u003eUnheated boom-mount AOA and pitot probe for Dynon SkyView and D10\/D100-series systems.\u003c\/p\u003e\u003ch3\u003eCompatibility and installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, parent equipment, installation eligibility, connector and required interfaces against current approved data before ordering.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182183616843,"sku":"100532-000","price":7737.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100532-000.jpg?v=1790586349"},{"product_id":"dynon-100578-000","title":"Dynon 100578-000 Jabiru CHT Probe, Type J, 12 mm Ring Terminal","description":"\u003cp\u003eDynon Jabiru CHT Probe 100578-000 — type-J CHT ring-terminal probe. Ring-terminal type-J thermocouple measures cylinder-head temperature on supported Jabiru installations.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 100578-000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e type-J CHT ring-terminal probe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions \/ format:\u003c\/strong\u003e 12 mm ring terminal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Jabiru; supplied in J22 4 in and J33 6 in sensor-kit configurations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, revision, connector and approved application before ordering or installation. Follow current manufacturer and aircraft data.\u003c\/p\u003e\u003cp\u003eOne Dynon Jabiru CHT Probe 100578-000; parent equipment, mating hardware and installation materials are not included unless explicitly listed.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182183944523,"sku":"100578-000","price":1143.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100578-000.jpg?v=1790589808"},{"product_id":"dynon-100654-000","title":"Dynon 100654-000 Capacitance to Voltage Converter for Van’s RV","description":"\u003cp\u003eDynon 100654-000 is the capacitance to voltage converter for the capacitive-plate fuel level sensor option of Van’s Aircraft RV kits. It converts the plate capacitance (50–1000 pF) into a 0–5 V DC signal for the fuel level input of a Dynon EMS, including the SkyView SV-EMS-220\/221. Dynon designed it for the Van’s RV plates only and advises against its use with other capacitive fuel level sensors.\u003c\/p\u003e\u003cp\u003eThe male BNC connector plugs into the female BNC connector on the Van’s RV tank. Three wires go to the SV-EMS-220\/221: black to ground (pin 5, 13, 16, 17 or 30), white to a fuel level input (pin 8, 22, 23 or 31) and red to the 12 V output on pin 15. Power input is 10–15 V DC with a 25 mA draw; in a 24 V aircraft the converter is powered from the EMS, as more than 15 V damages it. The unit weighs 0.04 kg. Dynon SkyView experimental products are not intended for type-certificated aircraft. Fit depends on the EMS model.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182184108363,"sku":"100654-000","price":2219.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100654-000.jpg?v=1791686887"},{"product_id":"dynon-100667-000","title":"Dynon 100667-000 Heated AOA\/Pitot Probe with Controller, 12 V","description":"\u003ch2\u003eDynon heated AOA\/Pitot probe\u003c\/h2\u003e\u003cp\u003eHeated 12 V AOA and pitot probe supplied with controller for Dynon systems. Part number: 100667-000.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeated 12 V AOA and pitot probe supplied with controller for Dynon systems.\u003c\/li\u003e\n\u003cli\u003eExact identity: Dynon heated AOA\/Pitot probe\u003c\/li\u003e\n\u003cli\u003ePart number: 100667-000\u003c\/li\u003e\n\u003cli\u003e12 V only\u003c\/li\u003e\n\u003cli\u003econtroller included\u003c\/li\u003e\n\u003cli\u003eapproximately 0.71 lb \/ 0.32 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eDynon heated AOA\/Pitot probe — Part number 100667-000.\u003c\/p\u003e\u003ch3\u003ePurpose and selection\u003c\/h3\u003e\u003cp\u003eHeated 12 V AOA and pitot probe supplied with controller for Dynon systems.\u003c\/p\u003e\u003ch3\u003eCompatibility and installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, parent equipment, installation eligibility, connector and required interfaces against current approved data before ordering.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182184501579,"sku":"100667-000","price":15059.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100667-000.jpg?v=1791615506"},{"product_id":"dynon-100830-000","title":"Dynon 100830-000 D-Sub 9-Pin Male Connector Kit","description":"\u003cp\u003eDynon D-sub 9-pin Male Connector Kit — D-sub connector kit. Field-assembly kit provides a male 9-pin D-sub connector and its specified hardware.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 100830-000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e D-sub connector kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Connector, pins, shell and thumbscrews\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, revision, connector and approved application before ordering or installation. Follow current manufacturer and aircraft data.\u003c\/p\u003e\u003cp\u003eOne Dynon D-sub 9-pin Male Connector Kit; parent equipment, mating hardware and installation materials are not included unless explicitly listed.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182184862027,"sku":"100830-000","price":614.4,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100830-000.jpg?v=1790590125"},{"product_id":"dynon-100830-002","title":"Dynon 100830-002 D-sub 25-Pin Male Connector Kit","description":"\u003cp\u003eDynon 100830-002 is a male 25-pin D-sub connector kit for wiring Dynon avionics. The kit contains the connector, the pins, the connector shell and a thumb-screw set. The female 25-pin counterpart is Dynon 100831-002; the male 9-pin kit is 100830-000.\u003c\/p\u003e\u003cp\u003eDynon Certified, Dynon’s line for certified aircraft, does not list this P\/N.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182185124171,"sku":"100830-002","price":859.7,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100830-002.jpg?v=1790590128"},{"product_id":"dynon-100831-000","title":"Dynon 100831-000 Female 9-Pin D-Sub Connector Kit","description":"\u003ch2\u003eDynon female D-sub connector kit\u003c\/h2\u003e\u003cp\u003eFemale 9-pin D-sub connector kit with connector, pins, shell and thumb-screw set. Part number: 100831-000.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFemale 9-pin D-sub connector kit with connector, pins, shell and thumb-screw set.\u003c\/li\u003e\n\u003cli\u003eExact identity: Dynon female D-sub connector kit\u003c\/li\u003e\n\u003cli\u003ePart number: 100831-000\u003c\/li\u003e\n\u003cli\u003efemale D-sub\u003c\/li\u003e\n\u003cli\u003e9 pins\u003c\/li\u003e\n\u003cli\u003econnector shell and thumb screws included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eDynon female D-sub connector kit — Part number 100831-000.\u003c\/p\u003e\u003ch3\u003ePurpose and selection\u003c\/h3\u003e\u003cp\u003eFemale 9-pin D-sub connector kit with connector, pins, shell and thumb-screw set.\u003c\/p\u003e\u003ch3\u003eCompatibility and installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, parent equipment, installation eligibility, connector and required interfaces against current approved data before ordering.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182185288011,"sku":"100831-000","price":614.4,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100831-000.jpg?v=1790590132"},{"product_id":"dynon-100831-001","title":"Dynon 100831-001 D-Sub Connector Kit, 15-Pin Female","description":"\u003cp\u003eDynon D-sub 15-pin Female Connector Kit — D-sub connector kit. Field-assembly kit provides a female 15-pin D-sub connector and its specified hardware.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 100831-001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e D-sub connector kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Connector, pins, shell and thumbscrews\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, revision, connector and approved application before ordering or installation. Follow current manufacturer and aircraft data.\u003c\/p\u003e\u003cp\u003eOne Dynon D-sub 15-pin Female Connector Kit; parent equipment, mating hardware and installation materials are not included unless explicitly listed.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182185615691,"sku":"100831-001","price":614.4,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100831-001.jpg?v=1790590136"},{"product_id":"dynon-100831-002","title":"Dynon 100831-002 D-sub 25-pin Female Connector Kit","description":"\u003cp\u003eDynon 100831-002 is a female 25-pin D-sub connector kit for building or repairing harnesses in a Dynon installation. The kit contains the connector, pins, connector shell and a thumb-screw set. Dynon lists it with its system cables, harnesses and connectors; the male 25-pin kit is P\/N 100830-002, and the female 9-pin and 15-pin kits are 100831-000 and 100831-001.\u003c\/p\u003e\u003cp\u003eA self-made D25F harness is one of the options Dynon gives, for example, for the SV-INTERCOM-2S, which has a D25M connector. Dynon sells the kit in its experimental product line, which is not intended for type-certificated aircraft.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182185746763,"sku":"100831-002","price":859.7,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100831-002.jpg?v=1790590139"},{"product_id":"sv32","title":"Dynon SV32 Servo, Standard Arm, 36 in-lb, 100854-000","description":"\u003cp\u003eDynon SV32 Standard-Arm Servo — SkyView autopilot servo. Standard-arm SV32 servo provides 36 in-lb rated torque for a compatible SkyView autopilot axis.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 100854-000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e SkyView autopilot servo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated torque:\u003c\/strong\u003e 36 in-lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e SkyView systems only; not D10A\/D100\/D180\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Servo base 101008-000 and limiting bracket 101025-000\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, revision, connector and approved application before ordering or installation. Follow current manufacturer and aircraft data.\u003c\/p\u003e\u003cp\u003eOne Dynon SV32 Standard-Arm Servo; parent equipment, mating hardware and installation materials are not included unless explicitly listed.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182186008907,"sku":"100854-000","price":22349.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100854-000.jpg?v=1790587910"},{"product_id":"sv32l","title":"Dynon 100854-001 SV32L Autopilot Servo, Long Arm, 36 in-lb","description":"\u003ch2\u003eDynon SV32L servo\u003c\/h2\u003e\u003cp\u003eDynon autopilot servo with long output arm, identified at 36 in-lb torque. Part number: 100854-001.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDynon autopilot servo with long output arm, identified at 36 in-lb torque.\u003c\/li\u003e\n\u003cli\u003eExact identity: Dynon SV32L servo\u003c\/li\u003e\n\u003cli\u003ePart number: 100854-001\u003c\/li\u003e\n\u003cli\u003eSV32L\u003c\/li\u003e\n\u003cli\u003elong output arm\u003c\/li\u003e\n\u003cli\u003eP\/N 100854-001\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eDynon SV32L servo — Part number 100854-001.\u003c\/p\u003e\u003ch3\u003ePurpose and selection\u003c\/h3\u003e\u003cp\u003eDynon autopilot servo with long output arm, identified at 36 in-lb torque.\u003c\/p\u003e\u003ch3\u003eCompatibility and installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, parent equipment, installation eligibility, connector and required interfaces against current approved data before ordering.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182186172747,"sku":"100854-001","price":22349.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100854-001.jpg?v=1790587913"},{"product_id":"sv32c","title":"Dynon SV32C Capstan Autopilot Servo","description":"\u003cp\u003eDynon SV32C is an autopilot servo with a capstan drive for aircraft with cable-operated flight controls. It delivers a maximum torque of 36 in-lb (4.1 N·m), and its own microprocessor simplifies calibration to the control surface. P\/N 100854-002 is the retail package: the SV32C servo (100754-002) and the Capstan Accessory Kit (101116-000) with bridle cable and clamp for 1\/8 in control cables.\u003c\/p\u003e\u003cp\u003eThe servo works only with Dynon SkyView systems; it is not compatible with D10A, D100 or D180 displays. It connects to the SkyView network and needs its own power supply; Dynon offers the SV-NET-SERVO wiring kit for this, one per servo, not included. One servo drives one axis. Current draw is 0.13 A when not engaged and 1.30 A at 100 % torque on a 12 V system (0.07 A and 0.70 A at 24 V). The operating range is −30 to +60 °C, and the servo needs no lubrication.\u003c\/p\u003e\u003cp\u003eDynon designs SkyView and its autopilot components for experimental and light sport aircraft, not for type-certificated aircraft. Installation follows the Capstan Accessory Kit documentation and the SkyView System Installation Guide; the builder determines the location and brackets. Fit depends on the aircraft type, the axis and the SkyView display model.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182186369355,"sku":"100854-002","price":22349.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/100854-002.jpg?v=1790587918"},{"product_id":"dynon-101020-000","title":"Dynon 101020-000 Generic Push-Pull Servo Mounting Kit","description":"\u003cp\u003eDynon generic servo mounting kit — generic push-pull mounting kit for Dynon autopilot servos. Part number: 101020-000.\u003c\/p\u003e\u003cp\u003eGeneric push-pull installation; aircraft-specific geometry must be checked.\u003c\/p\u003e\u003cp\u003eBefore ordering, verify the exact part number, parent equipment, installation eligibility, connector and required interfaces against current approved data.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182188663115,"sku":"101020-000","price":1109.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101020-000.jpg?v=1790590141"},{"product_id":"dynon-101020-003","title":"Dynon 101020-003 Roll Servo Mounting Kit for RV-7\/8\/10, Right Wing","description":"\u003cp\u003eDynon RV-7\/8\/10 Roll Servo Mounting Kit — autopilot servo mounting kit. Aircraft-specific hardware mounts a compatible Dynon autopilot roll servo in the right wing of supported Van’s RV models.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 101020-003\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e autopilot servo mounting kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Van’s RV-7, RV-8 and RV-10; roll axis; right wing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, revision, connector and approved application before ordering or installation. Follow current manufacturer and aircraft data.\u003c\/p\u003e\u003cp\u003eOne Dynon RV-7\/8\/10 Roll Servo Mounting Kit; parent equipment, mating hardware and installation materials are not included unless explicitly listed.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182189187403,"sku":"101020-003","price":3518.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101020-003.jpg?v=1790590156"},{"product_id":"dynon-101020-007","title":"Dynon 101020-007 RV-10 Pitch Servo Mounting Kit for SV42T","description":"\u003cp\u003e\u003cstrong\u003eDynon 101020-007\u003c\/strong\u003e — This concise accessory card contains only facts supported by the cited manufacturer material.\u003c\/p\u003e\u003cp\u003eRV-10 pitch-servo mounting kit.\u003c\/p\u003e\u003cp\u003eRV-10 pitch installation using the Dynon SV42T servo.\u003c\/p\u003e\u003cp\u003eUse only for the RV-10 pitch position with SV42T; do not substitute another servo or aircraft kit.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182189711691,"sku":"101020-007","price":3518.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101020-007.jpg?v=1790590170"},{"product_id":"sv42","title":"Dynon 101058-000 SV42 Autopilot Servo, Standard Arm, 55 in-lb","description":"\u003cp\u003eDynon SV42 Standard-Arm Servo — SkyView autopilot servo. Standard-arm SV42 servo provides 55 in-lb rated torque for a compatible SkyView autopilot axis.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 101058-000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e SkyView autopilot servo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated torque:\u003c\/strong\u003e 55 in-lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e SkyView autopilot; select servo and mounting kit by aircraft\/application\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents:\u003c\/strong\u003e Servo base 101008-000 and limiting bracket 101025-000\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, revision, connector and approved application before ordering or installation. Follow current manufacturer and aircraft data.\u003c\/p\u003e\u003cp\u003eOne Dynon SV42 Standard-Arm Servo; parent equipment, mating hardware and installation materials are not included unless explicitly listed.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182191382859,"sku":"101058-000","price":22349.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101058-000.jpg?v=1790587926"},{"product_id":"sv52","title":"Dynon SV52 Autopilot Servo","description":"\u003cp\u003eDynon SV52 is an autopilot servo with a standard output arm, rated at 72 in-lb (8.1 N·m) of torque. At holes A, B and C of the arm it delivers 214, 258 and 320 N with a maximum linear travel of 66, 56 and 46 mm. Its own microprocessor simplifies calibration to the control surface. P\/N 101059-000 is the retail package: the SV52 servo (101021-000) and the Limiting Bracket Kit (101025-000).\u003c\/p\u003e\u003cp\u003eThe servo works only with Dynon SkyView systems, not with D10A, D100 or D180 displays. It connects to the SkyView network and needs its own power supply; Dynon offers the SV-NET-SERVO wiring kit for this, one per servo, not included. Current draw is 0.13 A when not engaged and 2.80 A at 100 % torque on a 12 V system (0.07 A and 1.40 A at 24 V). A brass shear screw that breaks at 100 in-lb (11.3 N·m) lets the pilot overpower the servo.\u003c\/p\u003e\u003cp\u003eDynon designs SkyView and its autopilot components for experimental and light sport aircraft, not for type-certificated aircraft. Installation follows the SkyView System Installation Guide; the builder determines the location and brackets, and the arm must not travel more than ±60° from neutral. Fit depends on the aircraft type, the axis and the SkyView display model.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182193217867,"sku":"101059-000","price":22349.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101059-000.jpg?v=1790591414"},{"product_id":"harness-d37","title":"Dynon SV-HARNESS-D37 SkyView Display Harness","description":"\u003cp\u003eDynon SV-HARNESS-D37 (101231-000) is the primary display harness for a SkyView display, made with colour-coded aircraft-grade Tefzel wire. The power and ground wires are 6 ft long and all other wires 3 ft. The harness has two unterminated red power wires, which both connect to the same power source, two black ground wires, and a connector that mates with the SV-BAT-320 backup battery. Behind the display the harness extends about 76 mm (3 in).\u003c\/p\u003e\u003cp\u003eDynon requires the harness in every SkyView installation and includes it in display bundles; it is sold separately for pre-build wiring. Dynon states that SkyView is not intended for type certificated aircraft. Fit depends on the display model.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182195446091,"sku":"101231-000","price":4099.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101231-000.jpg?v=1790590214"},{"product_id":"gps-250","title":"Dynon SV-GPS-250 GPS Receiver and Antenna Module","description":"\u003cp\u003eSV-GPS-250 combines the GPS receiver and antenna in an external SkyView module, supplying position, ground track and time data for moving map and synthetic-vision functions.\u003c\/p\u003e\u003cp\u003eIt is an older, non-certified-position-source component and is not the SV-GPS-2020, SV-GPS-251 or a D10\/D100-series antenna. Early units shipped before 2014 are covered by Dynon’s GPS date-rollover service bulletin.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182196068683,"sku":"101242-000","price":8065.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101242-000.jpg?v=1790589798"},{"product_id":"bat-320","title":"Dynon SV-BAT-320 Backup Battery for SkyView, 101265-000","description":"\u003cp\u003eDynon SV-BAT-320 — backup battery. Rechargeable battery provides more than one hour of backup power to one connected SkyView display and attached modules.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 101265-000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e backup battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e Connects through the SkyView display main harness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e One battery required per display for independent backup\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, revision, connector and approved application before ordering or installation. Follow current manufacturer and aircraft data.\u003c\/p\u003e\u003cp\u003eOne Dynon SV-BAT-320; parent equipment, mating hardware and installation materials are not included unless explicitly listed.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182196298059,"sku":"101265-000","price":7508.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101265-000.jpg?v=1791613813"},{"product_id":"net-spl","title":"Dynon SV-NET-SPL SkyView Network Splitter","description":"\u003cp\u003eDynon SV-NET-SPL (101271-001) is the 1 ft (0.30 m) SkyView Network splitter made with aircraft-grade Tefzel wiring: one D9 male input connector divides into two D9 female outputs, so one network cable from a display serves two devices. Dynon names its main use as connecting a primary and a backup ADAHRS from one display cable.\u003c\/p\u003e\u003cp\u003eFor adding several SkyView modules, Dynon recommends the SV-NET-HUB; systems installed before March 2012 often use splitters for all network expansion, and Dynon still supports that layout. Dynon states that SkyView is not intended for type certificated aircraft.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182199378251,"sku":"101271-001","price":4208.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101271-001.jpg?v=1791630002"},{"product_id":"dynon-skyview-ems","title":"Dynon SkyView Engine Monitoring Module","description":"\u003cp\u003eDynon SkyView engine monitoring modules connect the engine to a SkyView system. SV-EMS-220 (P\/N 101292-000) connects compatible conventional engine sensors and harnesses. SV-EMS-221 (P\/N 101814-000) is for Rotax 912 iS and 915 iS engines: it receives primary engine data from the engine ECUs over dual CAN and also accepts conventional sensor inputs.\u003c\/p\u003e\u003cp\u003eSV-EMS-220 and SV-EMS-221 cannot be used together in the same system. An engine sensor package or individual sensors are required and are not included. Verify the part number, parent equipment, installation eligibility, connector and required interfaces against current approved data before ordering.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Conventional sensors (SV-EMS-220)","offer_id":58182199476555,"sku":"101292-000","price":18140.9,"currency_code":"CZK","in_stock":true},{"title":"Rotax 912 iS \/ 915 iS (SV-EMS-221)","offer_id":58809094537547,"sku":"101814-000","price":18140.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101292-000.jpg?v=1790587930"},{"product_id":"adahrs-200","title":"Dynon SV-ADAHRS-200 Primary ADAHRS Module","description":"\u003cp\u003eDynon SV-ADAHRS-200 (101293-000) is the primary air data, attitude and heading reference module for Dynon SkyView systems in experimental aircraft; an SV-OAT-340 outside air temperature sensor is included. MEMS sensors and an internal magnetometer measure inertial, magnetic and air data for attitude and synthetic vision, airspeed, altitude, vertical speed, slip, turn rate, angle of attack and heading. The module measures 120 × 31 × 66 mm, weighs 0.20 kg and draws 0.15 A at 12 V or 0.08 A at 24 V through the SkyView Network.\u003c\/p\u003e\u003cp\u003eAt least one SV-ADAHRS-200 is required for the SkyView PFD and for a backup SV-ADAHRS-201, which can be stacked on it with the Dual ADAHRS Mounting Kit 102532-000. Three 1\/8 in NPT ports take pitot, static and AOA pressure; the AOA display needs a Dynon AOA\/pitot probe.\u003c\/p\u003e\u003cp\u003eThe module mounts on a rigid surface within 3.66 m fore and aft and 1.83 m laterally of the center of gravity, aligned within 1° on all three axes with the pneumatic ports facing forward; brass hardware is used unless an SV-MAG-236 remote magnetometer is installed. Dynon does not intend SkyView equipment for type-certificated aircraft. Fit depends on the SkyView system model and the planned ADAHRS configuration.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182199542091,"sku":"101293-000","price":37007.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101293-000-1.jpg?v=1791187659"},{"product_id":"adahrs-201","title":"Dynon SV-ADAHRS-201 Backup ADAHRS Module","description":"\u003cp\u003eDynon SV-ADAHRS-201 is the backup air data, attitude and heading reference module for Dynon SkyView systems. MEMS sensors and an internal magnetometer measure inertial, magnetic and air data for attitude and synthetic vision, airspeed, altitude, vertical speed, slip, turn rate, angle of attack and heading; an SV-OAT-340 outside air temperature sensor is included. The module measures 120 × 31 × 66 mm, weighs 0.20 kg and draws 0.15 A at 12 V or 0.08 A at 24 V through the SkyView Network.\u003c\/p\u003e\u003cp\u003eIt works the same as the primary SV-ADAHRS-200, but only in a system with at least one SV-ADAHRS-200; if the SV-ADAHRS-200 is removed, the SV-ADAHRS-201 stays active for another 30 flight hours. Three 1\/8 in NPT ports take pitot, static and AOA pressure; the AOA display needs a Dynon AOA\/pitot probe.\u003c\/p\u003e\u003cp\u003eThe module mounts on a rigid surface within 3.66 m fore and aft and 1.83 m laterally of the center of gravity, aligned within 1° on all three axes with the pneumatic ports facing forward; brass hardware is used unless an SV-MAG-236 remote magnetometer is installed. Dynon does not intend SkyView equipment for type-certificated aircraft; the module is offered for SkyView systems in experimental aircraft. Fit depends on the SkyView system model and the installed ADAHRS configuration.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182199771467,"sku":"101293-001","price":22349.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101293-001.jpg?v=1790587934"},{"product_id":"net-servo","title":"Dynon SV-NET-SERVO Autopilot Servo Wiring Kit","description":"\u003cp\u003eSV-NET-SERVO is the manufacturer-defined wiring kit for connecting one Dynon autopilot servo to SkyView Network, power, ground and a quick-disconnect circuit.\u003c\/p\u003e\u003cp\u003eThis listing is the cable kit, not an SV32, SV42 or SV52 servo and not an aircraft-specific mounting kit. Connector pins require a suitable D-sub crimping tool.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182199935307,"sku":"101342-020","price":3135.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101342-020.jpg?v=1791670742"},{"product_id":"dynon-101389-000","title":"Dynon 101389-000 External GPS Receiver for D1 \/ D2 \/ D3 Pocket Panel","description":"\u003cp\u003eDynon 101389-000 is the external GPS receiver for the Dynon D1, D2 and D3 Pocket Panel portable EFIS and is intended for these units only. The D3 is supplied with it; this P\/N is the replacement or additional receiver.\u003c\/p\u003e\u003cp\u003eOn the D3 the receiver plugs into the GPS port on the left side, and the display shows Ext next to the GPS signal strength while it is connected. Dynon recommends it whenever the D3 is mounted in the panel with the pinch mount, because aircraft structure usually blocks the internal antenna; the top of the glareshield is usually a good location. The D3 needs a GPS fix to display attitude. Fit depends on the Pocket Panel model.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182200262987,"sku":"101389-000","price":2372.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101389-000.jpg?v=1790589778"},{"product_id":"arinc-429","title":"Dynon 101406-000 SkyView ARINC-429 Interface Module","description":"\u003ch2\u003eDynon SV-ARINC-429\u003c\/h2\u003e\u003cp\u003eSkyView ARINC-429 interface module for compatible IFR GPS and navigation equipment. Part number: 101406-000.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSkyView ARINC-429 interface module for compatible IFR GPS and navigation equipment.\u003c\/li\u003e\n\u003cli\u003eExact identity: Dynon SV-ARINC-429\u003c\/li\u003e\n\u003cli\u003ePart number: 101406-000\u003c\/li\u003e\n\u003cli\u003etwo ARINC-429 inputs\u003c\/li\u003e\n\u003cli\u003eone ARINC-429 output\u003c\/li\u003e\n\u003cli\u003eD25 navigator connector\u003c\/li\u003e\n\u003cli\u003eD9 SkyView Network connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eDynon SV-ARINC-429 — Part number 101406-000.\u003c\/p\u003e\u003ch3\u003ePurpose and selection\u003c\/h3\u003e\u003cp\u003eSkyView ARINC-429 interface module for compatible IFR GPS and navigation equipment.\u003c\/p\u003e\u003ch3\u003eCompatibility and installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, parent equipment, installation eligibility, connector and required interfaces against current approved data before ordering.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182200459595,"sku":"101406-000","price":12958.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101406-000.jpg?v=1790589826"},{"product_id":"xpndr-262","title":"Dynon SV-XPNDR-262 Class 2 Mode S Transponder, 130 W, 101410-000","description":"\u003cp\u003eDynon SV-XPNDR-262 — discontinued Class 2 Mode S transponder. SkyView-integrated 130 W transponder provides Mode S and 1090ES ADS-B Out for non-US operations within Class 2 limits.\u003c\/p\u003e\u003ch3\u003eProduct details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 101410-000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e discontinued Class 2 Mode S transponder\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical:\u003c\/strong\u003e 9–33 V DC; 5 W typical; 130 W nominal transmitter output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 2.4 × 1.8 × 5.6 in; 0.9 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e SkyView serial interface; Class 2: below 15,000 ft and 175 knots; not compliant with the US 2020 ADS-B Out mandate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproval \/ limitation:\u003c\/strong\u003e Discontinued product; TSO\/ETSO Class 2 approvals listed by Dynon\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBefore ordering or installation\u003c\/h3\u003e\u003cp\u003eMatch the exact part number, configuration, connector and approved application. Follow current manufacturer and aircraft data.\u003c\/p\u003e\u003cp\u003eOne Dynon SV-XPNDR-262; parent equipment, mating hardware and installation materials are not included unless explicitly listed.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182201114955,"sku":"101410-000","price":51877.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/043-101410-000.jpg?v=1791814428"},{"product_id":"ethernet-3cc","title":"Dynon 101582-000 SV-ETHERNET-3CC Ethernet Cable, 3 ft","description":"\u003cp\u003e\u003cstrong\u003eDynon SV-ETHERNET-3CC\u003c\/strong\u003e — performs the manufacturer-documented function within the compatible Dynon system.\u003c\/p\u003e\u003cp\u003eUse only with the exact documented system and installation; verify current manuals, interfaces and approval before order.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182201246027,"sku":"101582-000","price":1109.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101582-000.jpg?v=1791630003"},{"product_id":"intercom-2s","title":"Dynon SV-INTERCOM-2S Two-Place Stereo Intercom, 101677-000","description":"\u003cp\u003eDynon SV-INTERCOM-2S P\/N 101677-000 is a two-place stereo panel intercom with VOX, dual COM outputs, stereo EFIS\/music inputs and a fail-safe path from the primary radio to the pilot headset.\u003c\/p\u003e\u003cp\u003eSupply: 10–30 VDC; 0.1 A at 14 V. Weight: 7.2 oz \/ 204 g. Dimensions: 3.5 × 1.80 × 4.18″. Headsets: 2 stereo. Radio outputs: 2; external PTT selector required. Temperature: −40 to +70 °C.\u003c\/p\u003e\u003cp\u003eTwo-radio transmit selection needs an external SPDT PTT selector. Use separate shielded audio wiring, isolate headset jacks from conductive panels and confirm panel orientation and harness scope.\u003c\/p\u003e\u003cp\u003eOne SV-INTERCOM-2S unit. The current manual references headset-jack insulating washers; confirm the exact sales pack and harness before ordering.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182201606475,"sku":"101677-000","price":8069.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101677-000.jpg?v=1790587937"},{"product_id":"net-hub","title":"Dynon SV-NET-HUB SkyView Network Hub","description":"\u003ch2\u003eDynon SV-NET-HUB\u003c\/h2\u003e\u003cp\u003eFive-port hub for joining SkyView Network cables without field splicing. Part number: 101734-000.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFive-port hub for joining SkyView Network cables without field splicing.\u003c\/li\u003e\n\u003cli\u003eExact identity: Dynon SV-NET-HUB\u003c\/li\u003e\n\u003cli\u003ePart number: 101734-000\u003c\/li\u003e\n\u003cli\u003efive ports\u003c\/li\u003e\n\u003cli\u003eSkyView Network\u003c\/li\u003e\n\u003cli\u003eapproximately 0.19 lb \/ 0.09 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eDynon SV-NET-HUB — Part number 101734-000.\u003c\/p\u003e\u003ch3\u003ePurpose and selection\u003c\/h3\u003e\u003cp\u003eFive-port hub for joining SkyView Network cables without field splicing.\u003c\/p\u003e\u003ch3\u003eCompatibility and installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, parent equipment, installation eligibility, connector and required interfaces against current approved data before ordering.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182201737547,"sku":"101734-000","price":2372.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/101734-000.jpg?v=1791615508"},{"product_id":"video","title":"Dynon SkyView Video Input Adapter","description":"\u003ch2\u003eDynon SkyView video input adapter\u003c\/h2\u003e\u003cp\u003eUSB video-input adapter for displaying compatible composite or S-Video sources on supported SkyView displays. Part number: 102211-000.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eUSB video-input adapter for displaying compatible composite or S-Video sources on supported SkyView displays.\u003c\/li\u003e\n\u003cli\u003eExact identity: Dynon SkyView video input adapter\u003c\/li\u003e\n\u003cli\u003ePart number: 102211-000\u003c\/li\u003e\n\u003cli\u003eNTSC and PAL\u003c\/li\u003e\n\u003cli\u003ecomposite or S-Video\u003c\/li\u003e\n\u003cli\u003eone adapter per display\u003c\/li\u003e\n\u003cli\u003enot compatible with SkyView SE\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eDynon SkyView video input adapter — Part number 102211-000.\u003c\/p\u003e\u003ch3\u003ePurpose and selection\u003c\/h3\u003e\u003cp\u003eUSB video-input adapter for displaying compatible composite or S-Video sources on supported SkyView displays.\u003c\/p\u003e\u003ch3\u003eCompatibility and installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, parent equipment, installation eligibility, connector and required interfaces against current approved data before ordering.\u003c\/p\u003e","brand":"Dynon","offers":[{"title":"Default Title","offer_id":58182203998539,"sku":"102211-000","price":6622.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/102211-000.jpg?v=1790589781"}],"url":"https:\/\/shop.airteam.eu\/collections\/brand-dynon.oembed","provider":"AIR TEAM","version":"1.0","type":"link"}