{"title":"Trig","description":"\u003cp\u003eThis collection contains Trig avionics: Mode S transponders (TT21, TT22, TT23, TT23G, TT31), VHF COM radios (TY91, TY92, TY96, TY97), TX56 and TX57 NAV\/COM radios, TMA44 and TMA45 audio panels, the TC90 and TC20 controllers and the TN72 GPS position source.\u003c\/p\u003e\u003cp\u003eAntennas (TA14, TA50, TA70), mounting trays and installation kits are listed too. The units are used by owners and installers of light aircraft who upgrade or replace panel radios and transponders.\u003c\/p\u003e\u003cp\u003eWhen choosing, check the exact model, whether the unit comes with its controller, and the matching tray or installation kit by part number. Send us the P\/N or the aircraft type if you need help.\u003c\/p\u003e","products":[{"product_id":"trig-tc90","title":"Trig TC90 VHF Radio Control Unit","description":"\u003cp\u003eTrig TC90 is the panel control unit for the Trig TY91 and TY92 remote VHF COM radios, certified to ETSO-2C169a and TSO-C169a. It mounts in a standard 57 mm (2¼ in) instrument hole or the smaller Trig compact cut-out, is 44 mm high and 63 mm wide, needs 74 mm behind the panel with the connector fitted and weighs 90 g. Operating limits are −20 to +55 °C and 35,000 ft.\u003c\/p\u003e\u003cp\u003eThe TC90 draws its power from the radio and connects to it through a single 15-way D-type connector, which also accepts a serial frequency preload, usually from a GPS. It stores nine frequency memories. One TY91 or TY92 can be operated from two TC90 units, for example in a tandem cockpit; most settings are mirrored between the two heads, and preloaded frequencies appear only on the TC90 connected to the GPS.\u003c\/p\u003e\u003cp\u003eThe shop offers a new TC90 control head (01454-00) without the radio unit, and a repair of an existing TC90 (00857-00-01). Fit depends on the radio model; a repair quote needs the serial number and the fault description.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"00857-00-01 \/ Repair (RPO)","offer_id":58181516165451,"sku":"00857-00-01-RPO","price":8426.9,"currency_code":"CZK","in_stock":true},{"title":"01454-00 \/ New","offer_id":58181516198219,"sku":"01454-00","price":10639.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01454-00.jpg?v=1791672421"},{"product_id":"trig-tma44","title":"Trig TMA44 Audio Panel","description":"\u003cp\u003eTrig TMA44 is a mono audio panel for a standard avionics rack with a four-place voice-activated intercom and an integral three-light marker beacon receiver. It switches two COM transceivers and the Nav 1, Nav 2, ADF, DME, marker and auxiliary receiver audio, and it has two unswitched inputs for alerts such as stall or gear warnings. The unit is 33 mm high, 159 mm wide and 173 mm deep, weighs 0.68 kg and needs no forced-air cooling.\u003c\/p\u003e\u003cp\u003eIn split mode the pilot transmits on COM 1 while the co-pilot transmits on COM 2; if power is lost or the panel is switched off, the pilot headset and microphone stay connected to COM 1. The TMA44 has no Bluetooth; the TMA45 adds Bluetooth, stereo music and six intercom places.\u003c\/p\u003e\u003cp\u003eThe TMA44 uses a single 44-pin connector and runs on 14 V DC, or on 28 V DC with the 15 Ω dropping resistor from the installation kit. It is authorised under ETSO-C50c and ETSO-2C35d, and Trig supplies it with tray, installation kit, manuals and an EASA Form 1. Speaker, headsets and jacks, marker antenna, wiring and the 2 A circuit breaker are not included. A certified aircraft needs an approved modification and a Certificate of Release to Service after installation. Fit depends on the aircraft type and the audio panel being replaced.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"01801-00-01 \/ New","offer_id":58181516230987,"sku":"01801-00-01","price":31356.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01801-00-01.jpg?v=1790587814"},{"product_id":"trig-tma45","title":"Trig TMA45 Audio Panel","description":"\u003cp\u003eTrig TMA45 is an audio panel for a standard avionics rack with a six-place voice-activated intercom, an integral three-light marker beacon receiver and Bluetooth. It switches two COM transceivers and the Nav 1, Nav 2, ADF, DME, marker and auxiliary receiver audio. The unit is 33 mm high, 159 mm wide and 173 mm deep, weighs 0.61 kg and runs on 11–33 V DC without forced-air cooling.\u003c\/p\u003e\u003cp\u003eTrig Digital Noise Reduction sets the intercom squelch automatically. Two independent stereo music inputs are muted by more than 30 dB when radio or intercom audio is present. A paired mobile phone works in full-duplex telephone mode, and a second Bluetooth device can stream music. Five unswitched inputs carry alerts such as traffic or autopilot disconnect. In split mode the pilot transmits on COM 1 while the co-pilot transmits on COM 2; if power is lost, the pilot headset and microphone stay connected to COM 1.\u003c\/p\u003e\u003cp\u003eThe TMA45 replaces a Garmin GMA340 without wiring changes when the existing installation meets the installation requirements; it does not support a third COM. It is authorised under ETSO-C50c and ETSO-2C35d, and Trig supplies it with tray, installation kit and an EASA Form 1. Speaker, headset jacks, marker antenna and wiring are not included. Fit depends on the aircraft type and the audio panel being replaced.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"01802-00-01 \/ New","offer_id":58181516263755,"sku":"01802-00-01","price":46423.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01802-00-01.jpg?v=1790587817"},{"product_id":"trig-tn72","title":"Trig TN72 GPS Position Source","description":"\u003cp\u003eTrig TN72 is a remote GPS position source for ADS-B Out with Trig transponders, certified to TSO-C199 and ETSO-C199 Class B. The L1 receiver with SBAS supports EGNOS, WAAS, MSAS and GAGAN and sends position data to the transponder over an RS-232 output at 9600 bps. It runs on 11–33 V DC at about 0.1 A (14 V) and weighs 110 g.\u003c\/p\u003e\u003cp\u003eThe application is set in the transponder, not in the TN72. With SIL 1 \/ SDA 1 it is a TABS position source for voluntary ADS-B Out, for example in gliders, balloons and aircraft without an electrical system; this setting does not meet the US ADS-B airspace rule. With SIL 3 \/ SDA 2 on a Trig TT22 or TT31 it meets 14 CFR 91.227 for US experimental and light sport aircraft. Some transponders need new software.\u003c\/p\u003e\u003cp\u003eAn external active GPS antenna with QMA connector and 5 V phantom power is required, such as the Trig TA50, TA70 or another ETSO-C190 \/ C144a antenna. The installation kit with the QMA connector and the 9-way D-sub connector is included; antenna, cables and fixings are not. Trig states that the TN72 can be installed in EASA aircraft under CS-STAN as a voluntary ADS-B Out installation. Fit depends on the aircraft type and the installed transponder.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"01685-00-01 \/ New","offer_id":58181516296523,"sku":"01685-00-01","price":11239.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01685-00-01.jpg?v=1790587811"},{"product_id":"trig-tt21","title":"Trig TT21 Mode S Transponder","description":"\u003cp\u003eTrig TT21 is a Class 2 Mode S transponder (level 2els) with 1090ES ADS-B Out capability and 130 W transmitter output at the connector, approved for VFR and IFR flight. The TT21 is a remote unit operated from the separate TC20 panel controller, which has a built-in altitude encoder and fits a compact or standard 57 mm instrument hole. The transponder runs on 11–33 V DC, weighs 350 g in its mounting tray and needs no cooling air.\u003c\/p\u003e\u003cp\u003eADS-B Out needs a GPS position source on the RS-232 input; without one, the TT21 works as a Mode S elementary surveillance transponder. Trig no longer manufactures the TT21. Its successor, the Class 1 TT23, uses the same 25-way connector, pinout and TNC antenna connection and fits the same airframe mounting holes; only the mounting tray is exchanged.\u003c\/p\u003e\u003cp\u003eThis listing covers the repair of the customer’s TT21, P\/N 00675-00-01. The release document and warranty are stated in the quote. Fit depends on the P\/N of the installed unit; a repair quote needs the serial number and a description of the fault.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"00675-00-01 \/ Repair (RPO)","offer_id":58181516362059,"sku":"00675-00-01-RPO","price":17108.78,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/00675-00-01-RPO.jpg?v=1790587784"},{"product_id":"trig-tt31","title":"Trig TT31 Mode S Transponder","description":"\u003cp\u003eTrig TT31 is a Class 1 Mode S transponder with 240 W nominal output, elementary surveillance and 1090ES ADS-B Out to DO-260B, certified for IFR and VFR flight to ETSO-2C112b, ETSO-C166a, TSO-C112 and TSO-C166b. In its tray the panel-mounted unit measures 40 × 160 × 239 mm and weighs 1.35 kg; it needs no forced-air cooling.\u003c\/p\u003e\u003cp\u003eADS-B Out is enabled when a GPS position source is configured on an RS232 input; without one, the TT31 works as a conventional Mode S transponder. Altitude comes from a parallel Gray-code encoder or from a serial encoder or air data computer, which gives 25 ft resolution, and the TT31 can repeat serial altitude to a GPS. A TIS traffic output is available on RS232 and ARINC 429. The unit runs on 14 V or 28 V without configuration changes or dropper resistors.\u003c\/p\u003e\u003cp\u003eTT31 slides into an existing KT76A, KT76C or KT78A tray and uses the existing connector and antenna connection, provided the existing wiring is in good condition. P\/N 00220-00-01 is supplied without a tray, 00225-00-01 with the Trig tray; the repair option covers a TT31 00220-00. Trig's manual classes replacing an existing transponder with the TT31 as an EASA Minor Change; enabling ADS-B Out needs its own approval. Antenna, altitude encoder and cables are not included. Fit depends on the aircraft type, the installed transponder and the GPS position source.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"00220-00-01 \/ New","offer_id":58181516525899,"sku":"00220-00-01","price":60848.5,"currency_code":"CZK","in_stock":true},{"title":"00220-00 \/ Repair (RPO)","offer_id":58181516558667,"sku":"00220-00-RPO","price":18213.75,"currency_code":"CZK","in_stock":true},{"title":"00225-00-01 \/ New","offer_id":58181516591435,"sku":"00225-00-01","price":62830.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/00220-00-01.jpg?v=1790587781"},{"product_id":"trig-tx56","title":"Trig TX56 NAV\/COM Radio","description":"\u003cp\u003eTrig TX56 is a panel-mount VHF NAV\/COM that combines a 10 W COM transceiver with VOR, localizer and glideslope receivers. The COM covers 118.000–136.992 MHz with 8.33 kHz and 25 kHz channel spacing. The unit runs on 14 V or 28 V aircraft power (11–33 V DC) without configuration changes. It is 33 mm high and 159 mm wide, needs 231 mm behind the panel, is certified to ETSO-2C169a, 2C128, 2C34f, 2C36f and 2C40c and needs no forced-air cooling.\u003c\/p\u003e\u003cp\u003eThe display includes a graphical CDI, and dual watch monitors two COM or two NAV frequencies. More than 200 COM and NAV frequencies can be loaded through the front USB port; the Say Again function replays the last radio transmission. Rear interfaces include an RS-232 input for frequency preloading from a GPS navigator, CDI outputs for an external indicator, an audio panel output and a two-place intercom. The 16 W TX57 requires 28 V; the TX56A is a 25 kHz-only version.\u003c\/p\u003e\u003cp\u003eReplacing a KX 155 or KX 165 requires fitting the TX56\/TX57 tray; the unit is the same height as an SL30. Trig states that in Europe an existing Nav\/Com can be replaced under CS-STAN, while an aircraft without Nav\/Com functionality needs an EASA Minor Change. For IFR, Trig recommends two VHF COM radios and two NAV receivers. Fit depends on the aircraft type and the installed radio.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"01577-00-01 \/ New","offer_id":58181516624203,"sku":"01577-00-01","price":84511.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01577-00-01.jpg?v=1790587806"},{"product_id":"trig-tx57","title":"Trig TX57 NAV\/COM Radio","description":"\u003cp\u003eTrig TX57 is a panel-mount VHF NAV\/COM for 28 V aircraft that combines a 16 W COM transceiver with VOR, localizer and glideslope receivers. The COM covers 118.000–136.992 MHz with 8.33 kHz and 25 kHz channel spacing. The unit is 33 mm high and 159 mm wide, needs 231 mm behind the panel and runs on 22–33 V DC. It is certified to ETSO-2C169a, 2C128, 2C34f, 2C36f and 2C40c and needs no forced-air cooling.\u003c\/p\u003e\u003cp\u003eThe display includes a graphical CDI, and dual watch monitors two COM or two NAV frequencies. More than 200 COM and NAV frequencies can be loaded through the front USB port; the Say Again function replays the last radio transmission. Rear interfaces include an RS-232 input for frequency preloading from a GPS navigator, CDI outputs for an external indicator, an audio panel output and a two-place intercom. The 10 W TX56 also runs on 14 V; the TX57A is a 25 kHz-only version.\u003c\/p\u003e\u003cp\u003eReplacing a KX 155 or KX 165 requires fitting the TX56\/TX57 tray; the unit is the same height as an SL30. Trig states that in Europe an existing Nav\/Com can be replaced under CS-STAN, while an aircraft without Nav\/Com functionality needs an EASA Minor Change. For IFR, Trig recommends two VHF COM radios and two NAV receivers. Fit depends on the aircraft type and the installed radio.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"01579-00-01 \/ New","offer_id":58181516689739,"sku":"01579-00-01","price":98111.4,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01579-00-01.jpg?v=1790587808"},{"product_id":"trig-ty96-8-33khz","title":"Trig TY96 VHF COM Radio","description":"\u003cp\u003eTrig TY96 is a panel-mount VHF COM radio with 10 W nominal transmitter power that runs on a 14 V or 28 V supply (11–33 V DC) without configuration changes. It covers 118.000–136.992 MHz with 8.33 kHz and 25 kHz channel spacing and is certified to ETSO-2C169a and ETSO-2C128. In its tray the unit is 33 mm high and 159 mm wide, needs 231 mm behind the panel and weighs 1.06 kg; no forced-air cooling is required.\u003c\/p\u003e\u003cp\u003eDual watch monitors two frequencies at the same time, and Say Again replays the last radio transmission. More than 200 frequencies with identifiers can be loaded through the USB port, and an RS-232 input accepts frequency preloading from a GPS navigator. A dedicated button sets 121.5 MHz. The two-place intercom has auxiliary and stereo music inputs; outputs include two stereo headphone outputs, a speaker output and a mono output for an audio panel. The 16 W TY97 needs a 28 V supply; the TY96A is a 25 kHz-only version.\u003c\/p\u003e\u003cp\u003eTrig supplies the TY96 with mounting tray, installation kit, manuals on USB and an EASA Form 1. The installation manual includes wiring for existing SL40 and KY 197A installations, and Trig provides a CS-STAN document for TY96\/TY97 installations in EASA aircraft. Antenna and cables are not included. Fit depends on the aircraft type and the radio being replaced.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"01227-00-01 \/ New","offer_id":58181517574475,"sku":"01227-00-01","price":50153.4,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01227-00-01.jpg?v=1790587800"},{"product_id":"trig-ty97-8-33khz","title":"Trig TY97 VHF COM Radio","description":"\u003cp\u003eTrig TY97 is a panel-mount VHF COM radio with 16 W nominal transmitter power for aircraft with a 28 V supply (22–33 V DC). It covers 118.000–136.992 MHz with 8.33 kHz and 25 kHz channel spacing and is certified to ETSO-2C169a and ETSO-2C128. In its tray the unit is 33 mm high and 159 mm wide, needs 231 mm behind the panel and weighs 1.06 kg; no forced-air cooling is required.\u003c\/p\u003e\u003cp\u003eDual watch monitors two frequencies at the same time, and Say Again replays the last radio transmission. More than 200 frequencies with identifiers can be loaded through the USB port, and an RS-232 input accepts frequency preloading from a GPS navigator. A dedicated button sets 121.5 MHz. The two-place intercom has auxiliary and stereo music inputs; outputs include two stereo headphone outputs, a speaker output and a mono output for an audio panel. The 10 W TY96 also runs on 14 V; the TY97A is a 25 kHz-only version.\u003c\/p\u003e\u003cp\u003eTrig supplies the TY97 with mounting tray, installation kit, manuals on USB and an EASA Form 1. The installation manual includes wiring for existing KY 196A, KY 197A and SL40 installations, and Trig provides a CS-STAN document for TY96\/TY97 installations in EASA aircraft. Antenna and cables are not included. Fit depends on the aircraft type and the radio being replaced.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"01229-00-01 \/ New","offer_id":58181517607243,"sku":"01229-00-01","price":64345.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01229-00-01.jpg?v=1790587804"},{"product_id":"trig-00223-00","title":"Trig 00223-00 Installation Kit for TT31 Transponder","description":"\u003cp\u003eTrig 00223-00 is the installation kit for the Trig TT31 Mode S transponder and its mounting tray 00231-00; Trig lists it among the items supplied with the TT31. The kit contains a 12-way and a 24-way double-sided Molex crimp housing connector, 30 female crimp terminals for 18–24 AWG wire, a right-angle blind-mate coaxial panel-mount connector with a 7\/16 in external circlip, a plain stainless steel washer and a crinkle beryllium copper washer, and four M3 × 12 mm Pozidriv pan head screws.\u003c\/p\u003e\u003cp\u003eThe coaxial connector is fed through the tray and held by the washers and the circlip. The two Molex connectors pass through the openings at the rear of the tray and are fixed from the inside with the four M3 screws. Antenna, altitude encoder and cables are not part of the kit. A certified aircraft needs an approved modification and a Certificate of Release to Service after installation.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181564105035,"sku":"00223-00","price":3824.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/00223-00.jpg?v=1790591510"},{"product_id":"trig-00231-01","title":"Trig 00231-01 Mounting Tray for TT31 Transponder","description":"\u003cp\u003eTrig 00231-01, part number 00231-01, is a mounting tray for the TT31 transponder. Confirm the exact part number and required configuration against the applicable installation or parts documentation before ordering.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181564170571,"sku":"00231-01","price":2848.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/00231-01.jpg?v=1791715506"},{"product_id":"trig-00667-00","title":"Trig 00667-00 Mounting Tray for TT21\/TT22 and TY91\/TY92","description":"\u003cp\u003eTrig 00667-00 is the mounting tray for the remote unit of the Trig TT21 and TT22 Mode S transponders and the TY91 and TY92 VHF radios; Trig lists it among the items supplied with each of these units. The tray mounts in any convenient location in the cockpit, the cabin or an avionics bay.\u003c\/p\u003e\u003cp\u003eThe tray is fixed to a flat surface through its three mounting holes and must also be supported at its dimples. The unit hooks with its connector end under the lip of the tray and is locked by clipping the retaining wire over the lugs at the opposite end. A certified aircraft needs an approved modification and a Certificate of Release to Service after installation. Fit depends on the unit it is for.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181579243851,"sku":"00667-00","price":1105.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/00667-00.jpg?v=1791629874"},{"product_id":"ty92-8-33khz","title":"Trig TY92 Remote VHF COM Radio Unit","description":"\u003cp\u003eTrig TY92 is the remote VHF COM radio unit of the TY92 system, with 16 W nominal transmitter power for aircraft with a 28 V supply (22–33 V DC). It covers 118.000–136.992 MHz with 8.33 kHz and 25 kHz channel spacing and is certified to ETSO-2C169a and ETSO-2C128. In its mounting tray the unit measures 48 × 66 × 160 mm and weighs 350 g; no forced-air cooling is required.\u003c\/p\u003e\u003cp\u003eThe radio is operated from the separate TC90 panel controller, which it also powers; one radio can be controlled from two TC90 controllers. A 25-way D-type connector carries power, the controller link, microphone, PTT, headphone, speaker, intercom key and auxiliary audio lines; the antenna connects through a TNC connector. Dual watch monitors two frequencies at the same time, and a two-place intercom is built in. The 6 W TY91 is the version that also runs on 14 V.\u003c\/p\u003e\u003cp\u003eThis item is the radio unit only; the TC90 controller is not included. The unit can be mounted in the cockpit, the cabin or an avionics bay. Antenna, cables and airframe fixings are not supplied. Trig publishes EASA-approved Minor Change instructions for TY91\/TY92 installations in listed types, including the Cessna 150, 152 and 172 and the Robin DR400. Fit depends on the aircraft type and whether a TC90 controller is already installed.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181579440459,"sku":"00881-00-01","price":70686.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/00881-00-01.jpg?v=1790587795"},{"product_id":"ty91-8-33khz","title":"Trig TY91 VHF COM Remote Radio Unit","description":"\u003cp\u003eTrig TY91 00883-00-01 is the remote radio unit of the TY91 VHF COM system, supplied without the TC90 panel controller. It transmits with 6 W nominal carrier power and covers 118.000–136.992 MHz with 25 kHz and 8.33 kHz channel spacing (760 and 2280 channels). The unit runs on 14 V or 28 V systems (11–33 V DC) without configuration changes and is certified to ETSO-2C169a and ETSO-2C128.\u003c\/p\u003e\u003cp\u003eThe radio is operated from a separate TC90 controller, which takes its power and data from the radio unit; one radio unit can be operated from one or two TC90 controllers. The 25-way D connector carries two microphone and push-to-talk inputs, a headphone output, a 4-ohm speaker output, an auxiliary audio input and an intercom key input; the antenna connects to a TNC socket. In its mounting tray the unit measures 48 × 66 × 160 mm and weighs 350 g.\u003c\/p\u003e\u003cp\u003eThe unit mounts in the cockpit, the cabin or an avionics bay. A certified installation needs an approved modification and a Certificate of Release to Service; Trig publishes EASA-approved Minor Change instructions for TY91\/TY92 installations in listed types, including the Cessna 150, 152 and 172 and the Robin DR400. The TC90 controller, antenna and cables are not part of this item. Fit depends on the aircraft type and whether a TC90 controller is already installed.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181579473227,"sku":"00883-00-01","price":28323.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/00883-00-01.jpg?v=1790587786"},{"product_id":"ty91-8-33khz-1","title":"Trig TY91 VHF COM Radio","description":"\u003cp\u003eTrig TY91 is a VHF COM radio with a remote 6 W radio unit and a TC90 panel controller. It covers 118.000–136.992 MHz with 8.33 kHz and 25 kHz channel spacing, runs on 14 V or 28 V (11–33 V DC) without configuration changes and is certified to ETSO-2C169a and ETSO-2C128. The TC90 fits a standard 57 mm (2¼ in) instrument hole or the smaller Trig compact cut-out and needs 74 mm behind the panel with the connector fitted.\u003c\/p\u003e\u003cp\u003eDual watch monitors two frequencies at the same time, nine frequency memories are available, and a two-place intercom with an auxiliary audio input is built in. The radio unit measures 48 × 66 × 160 mm in its tray, weighs 350 g and mounts in the cockpit, the cabin or an avionics bay; the complete system weighs 460 g.\u003c\/p\u003e\u003cp\u003eTrig supplies the complete kit with mounting tray, installation kit, manuals and an EASA Form 1. Antenna, cables and airframe fixings are not included. Trig publishes EASA-approved Minor Change instructions for TY91\/TY92 installations in listed types, including the Cessna 150, 152 and 172 and the Robin DR400; other types need an approved modification and a Certificate of Release to Service after installation. Fit depends on the aircraft type and the radio being replaced.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181760483659,"sku":"01079-00","price":35291.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01079-00.jpg?v=1790587789"},{"product_id":"ty92-8-33khz-1","title":"Trig TY92 VHF COM Radio with TC90 Controller","description":"\u003cp\u003eTrig TY92 is a VHF COM radio with 16 W nominal transmitter power for aircraft with a 28 V supply (22–33 V DC). The system consists of a remote radio unit and the TC90 panel controller, which fits a standard 57 mm (2¼ in) instrument hole or the smaller Trig compact cut-out and needs 74 mm behind the panel with the connector fitted. The radio covers 118.000–136.992 MHz with 8.33 kHz and 25 kHz channel spacing and is certified to ETSO-2C169a and ETSO-2C128.\u003c\/p\u003e\u003cp\u003eDual watch monitors two frequencies at the same time, and the TC90 stores nine frequency memories. A two-place intercom with an auxiliary audio input is built in. The radio unit mounts in the cockpit, the cabin or an avionics bay; the system weighs 460 g. The TY92 Dual Control version (01452-00) uses two TC90 controllers, and the 6 W TY91 also runs on 14 V.\u003c\/p\u003e\u003cp\u003eTrig supplies the system with mounting tray, installation kit, installation and operating manuals and an EASA Form 1. Antenna, cables and airframe fixings are not included. Trig publishes EASA-approved Minor Change instructions for TY91\/TY92 installations in listed types, including the Cessna 150, 152 and 172, the Piper PA-38-112 and the Robin DR400. Fit depends on the aircraft type and the radio being replaced.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181760549195,"sku":"01080-00","price":78423.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01080-00.jpg?v=1790587798"},{"product_id":"tc20-kontrolni-jednotka","title":"Trig TC20 Mode S Transponder Controller","description":"\u003cp\u003eTrig TC20 (P\/N 01318-00) is the panel-mounted controller for the Trig TT21, TT22 and TT23 remote-mounted Mode S transponders, with a built-in altitude encoder. It fits the Trig compact cut-out or a standard 57 mm (2¼ in) instrument hole, needs 54 mm behind the panel and weighs 90 g. The controller is certified to ETSO-2C112b and ETSO-C88a (TSO-C112c and TSO-C88b), covers −1,000 to 35,000 ft and operates from −20 to +55 °C.\u003c\/p\u003e\u003cp\u003eA single 9-way D-type connector links the TC20 to the transponder: it receives 6.5 V power and a two-wire data link from the transponder, and its power\/mode switch drives the transponder’s power-on input. A separate RS-232 output at 9600 bps sends pressure altitude in Icarus\/Garmin format for GPS baro-aiding. The altitude encoder connects to the same static source as the primary altimeter. A certified aircraft needs an approved modification and a Certificate of Release to Service after installation. Fit depends on the transponder model and the aircraft type.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181831655755,"sku":"01318-00","price":14427.7,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01318-00.jpg?v=1791629937"},{"product_id":"ty91-dual-8-33khz","title":"Trig TY91 Dual Control VHF COM Radio","description":"\u003cp\u003eTrig TY91 Dual Control is a VHF COM radio system with a remote 6 W radio unit and two TC90 panel controllers, offered by Trig for tandem cockpits. The radio covers 118.000–136.992 MHz with 8.33 kHz and 25 kHz channel spacing, runs on 14 V or 28 V (11–33 V DC) without configuration changes and is certified to ETSO-2C169a and ETSO-2C128. Each TC90 fits a standard 57 mm (2¼ in) instrument hole or the smaller Trig compact cut-out and needs 74 mm behind the panel with the connector fitted.\u003c\/p\u003e\u003cp\u003eEither controller tunes the radio and adjusts the receiver settings, and most settings are mirrored on the other; tuning step, screen brightness and the nine frequency memories are kept per controller. Dual watch monitors two frequencies at the same time, and a two-place intercom with an auxiliary audio input is built in. The radio unit measures 48 × 66 × 160 mm in its tray, weighs 350 g and mounts in the cockpit, the cabin or an avionics bay.\u003c\/p\u003e\u003cp\u003eTrig supplies its radios with mounting tray, installation kit, manuals and an EASA Form 1. Antenna, cables and airframe fixings are not included. Trig publishes EASA-approved Minor Change instructions for TY91\/TY92 installations in listed types, including the Cessna 150, 152 and 172 and the Robin DR400. Fit depends on the aircraft type and the radio being replaced.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181831688523,"sku":"01451-00","price":44907.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01451-00.jpg?v=1790587792"},{"product_id":"trig-01690-00","title":"Trig 01690-00 Installation Kit for TN72 GPS Position Source","description":"\u003cp\u003eTrig 01690-00 is the installation kit for the Trig TN72 GPS position source; Trig lists it among the items supplied with the TN72. The kit contains a QMA coaxial connector for the GPS antenna lead, a 9-way female D-type contact housing with a 9-way headshell and nine female crimp terminals for 22–24 AWG wire, and the TN72 installation manual 01691-00.\u003c\/p\u003e\u003cp\u003eThe GPS antenna, its fixing hardware, the cables and the four flat head screws and self-locking nuts for mounting the receiver are not part of the kit. A certified aircraft needs an approved modification and a Certificate of Release to Service after installation.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181831852363,"sku":"01690-00","price":2678.6,"currency_code":"CZK","in_stock":true}]},{"product_id":"ta70","title":"Trig TA70 Certified GPS Antenna","description":"\u003cp\u003eTrig TA70 (P\/N 01740-00) is an active external GPS antenna certified to TSO-C190 for the Trig TN70 and TN72 GPS position sources. It receives 1575.42 MHz ±3 MHz with SBAS (EGNOS, WAAS, MSAS, GAGAN), amplifies the signal by 26.5–30.5 dB and takes 4.5–14.4 V DC, 40 mA typical, through the coaxial cable from a receiver that supplies DC on its antenna connector.\u003c\/p\u003e\u003cp\u003eThe antenna has a TNC female connector, 50 Ω impedance and a VSWR of 1.5:1 maximum. It weighs 0.31 lb (141 g) and measures 40 × 73 × 120 mm. A rubber gasket covers existing antenna holes and seals the antenna against weather on a retrofit. The package holds the installation guide, a mounting template and the fixing hardware; the TNC plug is not included.\u003c\/p\u003e\u003cp\u003eThe antenna mounts on top of the aircraft with four screws and one connector hole, with a clear view of the sky; a composite airframe needs no additional ground plane. Trig lists the TA70 in the equipment list of its FAA ADS-B STCs, which is not an EASA approval. A certified aircraft needs an approved modification and a Certificate of Release to Service after installation. Fit depends on the aircraft type and the GPS position source.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181831917899,"sku":"01740-00","price":9092.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01740-00.jpg?v=1790589690"},{"product_id":"ta50","title":"Trig TA50 Compact GPS Antenna, 1 m QMA Cable","description":"\u003cp\u003eTrig TA50 (P\/N 02171-00) is a compact active WAAS GPS antenna with a fixed 1 m (39 in) cable and a QMA connector that plugs directly into the Trig TN72 GPS position source. Trig positions it for gliders, light sport and experimental aircraft where space for an antenna is limited. It receives 1575.42 MHz ±3 MHz with 26 dB of gain over a passive antenna.\u003c\/p\u003e\u003cp\u003eThe antenna takes 3–5 V DC over the coaxial cable, has an antenna gain above 1 dBic, a VSWR of 1.5:1 and a noise figure of 1.5 dB maximum, and operates from −40 to +85 °C. It is weatherproof and mounts inside the cabin, for example on top of the glareshield, or on the outside of the aircraft, with a clear 360° view of the sky to the horizon in level flight. It is fixed with the adhesive pad supplied; for best reception Trig recommends a metal surface of at least 7 × 7 cm as a ground plane. Trig also supplies the TA50 with a 3 m cable (02172-00).\u003c\/p\u003e\u003cp\u003eThe TA50 is not EASA or FAA certified. For Part 23 aircraft that need a conventional dorsal antenna, Trig points to the certified TA70. Fit depends on the aircraft type and the GPS receiver the antenna connects to.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181832671563,"sku":"02171-00","price":2462.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/02171-00.jpg?v=1790589693"},{"product_id":"ta50-1","title":"Trig TA50 Compact GPS Antenna, 3 m QMA Cable","description":"\u003cp\u003eTrig TA50 (P\/N 02172-00) is a compact active WAAS GPS antenna with a fixed 3 m (118 in) cable and a QMA connector that plugs directly into the Trig TN72 GPS position source. Trig positions it for gliders, light sport and experimental aircraft where space for an antenna is limited. It receives 1575.42 MHz ±3 MHz with 26 dB of gain over a passive antenna.\u003c\/p\u003e\u003cp\u003eThe antenna takes 3–5 V DC over the coaxial cable, has an antenna gain above 1 dBic, a VSWR of 1.5:1 and a noise figure of 1.5 dB maximum, and operates from −40 to +85 °C. It is weatherproof and mounts inside the cabin, for example on top of the glareshield, or on the outside of the aircraft, with a clear 360° view of the sky to the horizon in level flight. It is fixed with the adhesive pad supplied; for best reception Trig recommends a metal surface of at least 7 × 7 cm as a ground plane. Trig also supplies the TA50 with a 1 m cable (02171-00).\u003c\/p\u003e\u003cp\u003eThe TA50 is not EASA or FAA certified. For Part 23 aircraft that need a conventional dorsal antenna, Trig points to the certified TA70. Fit depends on the aircraft type and the GPS receiver the antenna connects to.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181840863563,"sku":"02172-00","price":3487.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/02172-00.jpg?v=1790589696"},{"product_id":"ta14","title":"Trig TA14 Transponder Antenna","description":"\u003cp\u003eTrig TA14 is a broadband blade antenna for transponders and DME, certified to FAA TSO-C74c and TSO-C66c. It covers 960–1220 MHz with 50 Ω nominal impedance, a VSWR of 1.5:1 maximum, unity gain, vertical polarization and an omnidirectional pattern, and is rated for 2.5 kW peak. The antenna is 86 mm (3.4 in) high, weighs 90 g (0.2 lb) and has a female BNC connector.\u003c\/p\u003e\u003cp\u003eTrig designed the TA14 for its own transponders and rates it for 350 mph and 50,000 ft, with a drag of 0.09 lb at 250 mph. Longer mounting studs suit both metal and composite airframes. The antenna comes in a single version and ships with an installation kit, the installation guide and an FAA 8130 release.\u003c\/p\u003e\u003cp\u003eThe antenna mounts on a flat surface, typically on the underside, at least 18 in (0.46 m) from other metal protrusions. Two mounting holes and a connector hole are drilled from the template, with the supplied rubber pad between antenna and skin; a composite airframe needs a metallic ground plane of at least 150 cm² behind the antenna. The coax (RG400 or similar) with its BNC plug is not included. A certified aircraft needs an approved modification and a Certificate of Release to Service. Fit depends on the aircraft type and the transponder model.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181853512011,"sku":"02449-00","price":5537.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/02449-00.jpg?v=1790589699"},{"product_id":"tt23","title":"Trig TT23 Mode S Transponder with TC20 Controller, 02627-00-01","description":"\u003cp\u003eTrig TT23 is a Class 1 Mode S transponder with 1090ES ADS-B Out and 250 W nominal output, certified for VFR and IFR flight. The system consists of a remote transponder unit and the TC20 panel controller with a built-in altitude encoder. The TC20 fits a standard 57 mm (2¼ in) instrument hole or a smaller compact cut-out and needs 54 mm behind the panel.\u003c\/p\u003e\u003cp\u003eADS-B Out needs an external GPS position source with a serial output. Without one, the TT23 works as a conventional Mode S transponder. The TT23G variant has an internal GPS receiver certified to ETSO-C199. The unit runs on 14 V or 28 V without configuration changes.\u003c\/p\u003e\u003cp\u003eTT23 replaces a TT21 or TT22 without new wiring. The 25-way connector, pinout, TNC antenna connection and TC20 controller are retained; only the mounting tray is exchanged, and it uses the existing airframe mounting holes. For eligible EASA aircraft, the transponder is installed as Standard Change CS-SC002c and ADS-B Out under CS-SC005a. Antenna and cables are not included. Fit depends on the aircraft type and the GPS position source.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181870879051,"sku":"02627-00-01","price":55602.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/02627-00-01.jpg?v=1790587821"},{"product_id":"tt23g","title":"Trig TT23G Mode S Transponder with GPS","description":"\u003cp\u003eTrig TT23G is a Class 1 Mode S transponder with 1090ES ADS-B Out, 250 W nominal output and an internal GPS receiver certified to ETSO-C199. The system consists of a remote transponder unit and the TC20 panel controller with a built-in altitude encoder. The TC20 fits a standard 57 mm (2¼ in) instrument hole or a smaller compact cut-out and needs 54 mm behind the panel.\u003c\/p\u003e\u003cp\u003eThe internal GPS needs an active GPS antenna on the QMA connector; the TT23G powers it with 5 V at up to 40 mA. With the internal GPS, the TT23G is an ETSO-C199 (TABS) ADS-B transmitter for voluntary equipage, and its NMEA position output can feed other avionics. Trig states that the TT23G has not been demonstrated to meet CS-ACNS for certified aircraft. The unit runs on 14 V or 28 V without configuration changes.\u003c\/p\u003e\u003cp\u003eTT23G replaces a TT21 or TT22 on the existing 25-way connector, pinout and TNC antenna connection; only the mounting tray is exchanged, and it uses the existing airframe mounting holes. The internal GPS needs TC20 software 1.15 or later. For eligible EASA aircraft, the transponder is installed as Standard Change CS-SC002c, and ADS-B Out with the internal GPS follows Configuration 2 of CS-SC005a. Antennas and cables are not included. Fit depends on the aircraft type and the installed transponder model.\u003c\/p\u003e","brand":"Trig","offers":[{"title":"Default Title","offer_id":58181872910667,"sku":"02629-00-01","price":63267.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/02629-00-01.jpg?v=1790587823"},{"product_id":"trig-tt22","title":"Trig TT22","description":null,"brand":"Trig","offers":[{"title":"Default Title","offer_id":58767025701195,"sku":"00745-00-01-RPO","price":17108.78,"currency_code":"CZK","in_stock":true}]}],"url":"https:\/\/shop.airteam.eu\/collections\/brand-trig.oembed","provider":"AIR TEAM","version":"1.0","type":"link"}