{"title":"Navigation \u0026 Strobe Lights","description":"\u003cp\u003eLED position lights, strobes, anti-collision beacons, tail lights and wingtip light kits from Whelen, Aveo and AeroLEDS. Examples are the Whelen 90852 beacon and MicroBurst II Plus and III Plus wingtip kits, the Aveo SuperNova, RedBaron and Ultra Galactica lights and the AeroLEDs SunTail and SunBeacon II.\u003c\/p\u003e\u003cp\u003eSeveral lights come in separate versions for certified and experimental aircraft. Check the version and the supply voltage in the product title.\u003c\/p\u003e","products":[{"product_id":"whelen-orion-600","title":"Whelen Orion 600 Series Wingtip Light","description":"\u003cp\u003eThe Whelen Orion 600 is a wingtip light that combines the forward position light, the white tail position light and a white anti-collision light in one housing. The forward position light is green or red. The same light is available for 14 V DC and 28 V DC.\u003c\/p\u003e\n\u003cp\u003eWhelen lists TSO\/ETSO-C96a Class II and TSO\/ETSO-C30c Type II and III. The lens is clear hard-coated polycarbonate and can be replaced in the field. The housing measures 144 x 45 x 52 mm and weighs 0.5 lb (about 230 g). Anti-collision lights flash at 45 plus or minus 5 times a minute. A SYNC lead lets Whelen anti-collision lights flash together.\u003c\/p\u003e\n\u003cp\u003eOn 14 V the position lights draw 0.48 A and the anti-collision light draws 1.0 A on average (5.2 A peak). On 28 V the position lights draw 0.17 A and the anti-collision light draws 0.5 A on average (2.6 A peak), from a 22 to 32 V supply. Part numbers are 01-0771733-01 (green, 14 V), 01-0771733-02 (red, 14 V), 01-0771733-11 (green, 28 V) and 01-0771733-12 (red, 28 V). A forward position system uses one light on each wingtip. On a certified aircraft the installation needs approved data.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Green \/ 14V","offer_id":58181517640011,"sku":"01-0771733-01","price":15531.9,"currency_code":"CZK","in_stock":true},{"title":"Red \/ 14V","offer_id":58853524341067,"sku":"01-0771733-02","price":15531.9,"currency_code":"CZK","in_stock":true},{"title":"Green \/ 28V","offer_id":58853609963851,"sku":"01-0771733-11","price":15531.9,"currency_code":"CZK","in_stock":true},{"title":"Red \/ 28V","offer_id":58853610062155,"sku":"01-0771733-12","price":15531.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771733-01.jpg?v=1790591558"},{"product_id":"aeroleds-00-8120","title":"AeroLEDs 00-8120 Synchronizer Circuit","description":"\u003cp\u003eAeroLEDs 00-8120 — synchronizer circuit. It is an installation component for synchronising supported AeroLEDs lighting circuits. Part number 00-8120; type: synchronizer circuit; compatibility: supported AeroLEDs lights per installation manual.\u003c\/p\u003e\u003cp\u003eConfirm the exact part number, intended installation, aircraft approval and current manufacturer instructions before ordering.\u003c\/p\u003e\u003cp\u003eOne AeroLEDs synchronizer P\/N 00-8120; no other equipment is included.\u003c\/p\u003e","brand":"AeroLEDS","offers":[{"title":"Default Title","offer_id":58181563580747,"sku":"00-8120","price":700.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/aeroleds-00-8120-cropped.png?v=1790512301"},{"product_id":"a442","title":"Whelen A442 AMP 3-Position Female Connector Kit","description":"\u003cp\u003eWhelen A442, P\/N 01-0410823-00, is a replacement connector kit for cables with a 3-position AMP female connector and sockets. Whelen Aerospace Technologies lists it among its aircraft replacement connector kits, next to the 3-position male kit A441 (01-0430011-00), the 2- and 4-position kits A444, A446, A447 and A448 and the CRIMPAV crimp tool. Whelen lists no STC for the kit.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181622661451,"sku":"01-0410823-00","price":594.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0410823-00.jpg?v=1790591506"},{"product_id":"a441","title":"Whelen A441 AMP 3-Position Male Connector Kit","description":"\u003cp\u003eWhelen A441, P\/N 01-0430011-00, is a replacement connector kit for cables with a 3-position AMP male connector and pins. Whelen Aerospace Technologies lists it among its aircraft replacement connector kits, next to the 3-position female kit A442 (01-0410823-00), the 2- and 4-position kits A444, A446, A447 and A448 and the CRIMPAV crimp tool. Whelen lists no STC for the kit.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181622825291,"sku":"01-0430011-00","price":563.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0430011-00.jpg?v=1791620112"},{"product_id":"hdacf","title":"Whelen HDACF Strobe Power Supply, 3 Outlets, 14\/28 V","description":"\u003cp\u003eWhelen HDACF (P\/N 01-0770028-05, A413AHDACF-14\/28V) is a remote strobe power supply for up to three strobe lightheads in 14 V or 28 V DC aircraft. Whelen gives an operating range of 10–30 V DC; it draws 7.0 A at 14 V and 3.5 A at 28 V, weighs 953 g and measures 140 × 127 × 60 mm. Whelen holds an FAA PMA for this P\/N.\u003c\/p\u003e\u003cp\u003eTwo lights receive 42 joules each when flashing alternately and 21 joules each when flashing together. With three lights, outlet 1 delivers 42 joules and alternates with outlets 2 and 3, which flash together at 21 joules each. A jumper on the trigger plug sets the alternating pattern; a switch in series with the jumper turns off outlets 2 and 3 while outlet 1 stays on. Whelen specifies a distance of at least 3 ft from the ADF loop.\u003c\/p\u003e\u003cp\u003eEASA STC 10052976 (aeroplanes) and 10053536 (rotorcraft), both based on FAA STC SA615EA, cover Whelen P\/N 01-0770028-( ) as a replacement for the originally installed anti-collision lights on the types in their approved model lists (manual 05131 Rev. E, placard A421). After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the strobe lighthead models.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181623021899,"sku":"01-0770028-05","price":19549.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0770028-05.jpg?v=1790591235"},{"product_id":"a469b","title":"Whelen A469B Flash Tube Assembly","description":"\u003cp\u003eWhelen A469B (P\/N 01-0770044-02) is a replacement flash tube assembly for Whelen strobe lights. Whelen lists it in the parts breakdowns of the A470A series remote strobe lighthead, the HRCFA self-contained anti-collision strobe and the 70285 series self-contained strobe. Related versions are the A469A (01-0770044-00) with a non-reflective base and the radio-shielded A469D (01-0770044-01).\u003c\/p\u003e\u003cp\u003eLens, clamp ring, gaskets and power supply are separate items in the Whelen parts lists, and the replacement follows Whelen manual 05131 Rev. E. After the tube is replaced, the aircraft is released to service with a Certificate of Release to Service. Fit depends on the model of the installed light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181623218507,"sku":"01-0770044-02","price":5113.71,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0770044-02.jpg?v=1791629876"},{"product_id":"a625","title":"Whelen A625 Strobe Light Assembly, White","description":"\u003cp\u003eWhelen A625 (P\/N 01-0770058-03) is a white strobe lighthead with a clear lens, the standard version of the A625 series without radio shielding, for installation in a 1.1 in (28 mm) hole. It is driven by a remote Whelen strobe power supply, which also sets its input current. The assembly weighs 0.2 lb (91 g) and protrudes 1.7 in (43 mm) outside the skin and 1.1 in (28 mm) inside; the mounting screws are 1.75 in (44 mm) apart.\u003c\/p\u003e\u003cp\u003eWhelen lists the A625 for tip-tank aircraft with enclosed position lights, as an add-on strobe on the wing or the tail, and behind the forward position light on Cessna conical-camber wingtips. The lead, about 5.5 in long, carries anode (red), cathode (black) and trigger (white). Other versions are A625R with red lens (-04), A625D with radio shielding (-13) and A625DR with radio shielding and red lens (-14).\u003c\/p\u003e\u003cp\u003eWhelen holds an FAA PMA for the -03 under FAA STC SA800EA, which lists P\/N 01-0770058-( ). EASA STC 10055068 (GA aeroplanes) and EASA STC 10056206 (rotorcraft) validate SA800EA for the types in their approved model lists; installation follows Whelen manual 05131. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type, the mounting location and the strobe power supply model.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181623447883,"sku":"01-0770058-03","price":6661.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0770058-03.jpg?v=1790591251"},{"product_id":"a490atsc","title":"Whelen A490ATSC Strobe Power Supply, 14\/28 V","description":"\u003cp\u003eWhelen A490ATSC (P\/N 01-0770062-03, A490ATSCF-14\/28) is a remote strobe power supply for 14 V and 28 V DC aircraft that drives one strobe lighthead at 34 joules. It accepts 13–30 V DC, draws 4.0 A at 14 V and 2.0 A at 28 V, weighs 771 g and measures 127 × 79 × 78 mm. Whelen holds an FAA PMA for this P\/N.\u003c\/p\u003e\u003cp\u003eThe output connector carries anode, cathode and trigger; the input connector carries power, ground and a sync pin. An 18-gauge wire between the sync pins synchronises up to five other like units. A built-in circuit prevents steady glowing of the strobe tubes; when an older supply is replaced, the harness shield is grounded at the power-supply end only. Whelen specifies at least 3 ft from the ADF loop and a drain hole in the cover for inverted mounting.\u003c\/p\u003e\u003cp\u003eEASA STC 10052976 (aeroplanes) and 10053536 (rotorcraft), both based on FAA STC SA615EA, cover Whelen P\/N 01-0770062-( ) as a replacement for the originally installed anti-collision lights on the types in their approved model lists (manual 05131 Rev. E, placard A421). After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the strobe lighthead model.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181623480651,"sku":"01-0770062-03","price":18259.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0770062-03.jpg?v=1790591269"},{"product_id":"w1555ah2","title":"Whelen W1555AH2","description":"\u003cp\u003eWhelen 01-0770551-03 is a dual tail light for 28 V systems in horizontal mounting. Parts listings name it a tail position light head assembly, horizontal, 28 V.\u003c\/p\u003e\u003cp\u003eA certified aircraft needs approved data for the installation and a Certificate of Release to Service. Fit depends on the aircraft type and the light being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181641077067,"sku":"01-0770551-03","price":2502.1,"currency_code":"CZK","in_stock":true}]},{"product_id":"7111003","title":"Whelen 7111003 Green Wingtip LED Position\/Strobe Light, 28 V","description":"\u003cp\u003eWhelen 7111003 (P\/N 01-0771110-03) is a green 28 V DC wingtip light of the 71110 series that combines an LED forward position light with a strobe tube in an RFI-shielded unit. Whelen lists TSO-C30c Type II and TSO-C96a Class II. The position light has 3 green LEDs and draws 0.25 A; the light weighs 0.50 lb (227 g) and has an exposed height of 2.70 in (69 mm).\u003c\/p\u003e\u003cp\u003eThe strobe tube connects through the 3-pin J1 connector (anode, cathode, trigger) to a separate strobe power supply. The strobe lens is RFI-coated clear glass, the position light lens clear polycarbonate. The light is fixed with three #6-32 screws, and a lighting system uses two lights, one on each wingtip. The green 14 V version is 7111001, the red 28 V version 7111004. Whelen cross-references 7111003 to the Orion 650E LED model OR6502GE (01-0790701-11).\u003c\/p\u003e\u003cp\u003eA certified aircraft needs an approved modification or approved data for the installation and a Certificate of Release to Service. Fit depends on the aircraft type, the existing wingtip lights and the strobe power supply.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181650547019,"sku":"01-0771110-03","price":16226.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771110-03.jpg?v=1791721289"},{"product_id":"or5001v","title":"Whelen OR5001V","description":"\u003cp\u003eWhelen Orion 500 OR5001V (P\/N 01-0771774V01) is a 14 V DC LED tail light that combines the white tail position light and a white anti-collision light in one housing. Whelen lists TSO-C96a Class II (Class II and III in the installation guide) and TSO-C30c Type III, plus ETSO in its model table. The position light draws 0.2 A, the anti-collision light 0.72 A on average and 3.8 A peak, at 45 ± 5 flashes per minute.\u003c\/p\u003e\u003cp\u003eThe tail position light has 4 LEDs and the anti-collision light 18 LEDs; if any LED fails, the unit is repaired or replaced. Four 20 AWG leads carry the anti-collision supply (red), position supply (orange), SYNC (yellow) and ground (black); SYNC lets Whelen LED anti-collision lights flash together. Whelen cross-references OR5001V to the earlier A500AV14 (01-0770024-00) and A555AV14 (01-0770034-00); some earlier installations need an extra wire for the anti-collision function.\u003c\/p\u003e\u003cp\u003eIt is mounted as far aft as practicable on a thermally conductive surface. FAA STC SA800EA names P\/N 01-0771774-( ). Whelen lists EASA STC 10055068, the EASA validation of SA800EA for GA aeroplanes on its approved model list; EASA STC 10056206 Rev. 1 names 01-0771774-( ) for rotorcraft. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the existing tail light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181684298059,"sku":"01-0771774V01","price":11270.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771774V01.jpg?v=1790591664"},{"product_id":"or5002v","title":"Whelen OR5002V","description":"\u003cp\u003eWhelen Orion 500 OR5002V (P\/N 01-0771774V02) is a 28 V DC LED tail light that combines the white tail position light and a white anti-collision light in one housing. Whelen lists TSO-C96a Class II (Class II and III in the installation guide) and TSO-C30c Type III, plus ETSO in its model table. The position light draws 0.1 A, the anti-collision light 0.36 A on average and 1.9 A peak, at 45 ± 5 flashes per minute.\u003c\/p\u003e\u003cp\u003eThe tail position light has 4 LEDs and the anti-collision light 18 LEDs; if any LED fails, the unit is repaired or replaced. Four 20 AWG leads carry the anti-collision supply (red), position supply (orange), SYNC (yellow) and ground (black); SYNC lets Whelen LED anti-collision lights flash together. Whelen cross-references OR5002V to the earlier A500AV28 (01-0770024-01) and A555AV28 (01-0770034-01); some earlier installations need an extra wire for the anti-collision function.\u003c\/p\u003e\u003cp\u003eIt is mounted as far aft as practicable on a thermally conductive surface. For the EU, Whelen lists two EASA validations of FAA STC SA800EA: EASA STC 10055068 for GA aeroplanes on the EASA approved model list, and EASA STC 10056206 Rev. 1 for rotorcraft, which names P\/N 01-0771774-( ). The FAA STC on its own is not an EU approval. The installation ends with a Certificate of Release to Service. Fit depends on the aircraft type and the existing tail light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181684887883,"sku":"01-0771774V02","price":11270.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771774V02.jpg?v=1790591690"},{"product_id":"whelen-chroma-position-lamp","title":"Whelen Chroma LED Position Lamp","description":"\u003cp\u003eThe Whelen Chroma is a green or red LED lamp for wingtip forward position lights, approved to TSO-C30c (Type I red, Type II green). It replaces an incandescent lamp in the existing lamp socket behind the original lens of the light assembly. The lamp is 2.05 in (52 mm) high and 1.23 in (31 mm) wide and weighs about 1 oz (28 g). Current draw is 0.28 A at 14 V DC and 0.13 A at 28 V DC.\u003c\/p\u003e\u003cp\u003eWhelen lists the Chroma lamps as drop-in replacements for the incandescent lamps 1290( ), W1290( ), A7512( ), 628 and W628. The series covers CHROMA1G (green) and CHROMA1R (red) for 14 V and CHROMA2G and CHROMA2R for 28 V. Whelen rates the LED life at 10,000 hours.\u003c\/p\u003e\u003cp\u003eFAA STC SA800EA covers the Chroma lamps; for rotorcraft, EASA STC 10056206 validates it. A certified aircraft needs approved data for the installation and a Certificate of Release to Service.\u003c\/p\u003e\u003ch3\u003eVersions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGreen, 14 V – P\/N 01-0771900G14\u003c\/li\u003e\n\u003cli\u003eRed, 14 V – P\/N 01-0771900R14\u003c\/li\u003e\n\u003cli\u003eGreen, 28 V – P\/N 01-0771900G28\u003c\/li\u003e\n\u003cli\u003eRed, 28 V – P\/N 01-0771900R28\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Red \/ 14 V","offer_id":58867420496203,"sku":"01-0771900R14","price":3776.64,"currency_code":"CZK","in_stock":true},{"title":"Red \/ 28 V","offer_id":58181685576011,"sku":"01-0771900R28","price":3776.64,"currency_code":"CZK","in_stock":true},{"title":"Green \/ 14 V","offer_id":58867420889419,"sku":"01-0771900G14","price":3776.64,"currency_code":"CZK","in_stock":true},{"title":"Green \/ 28 V","offer_id":58867421348171,"sku":"01-0771900G28","price":3776.64,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771900R28.jpg?v=1790591852"},{"product_id":"7198517","title":"Whelen 7198517 LED Anti-Collision Flasher Assembly, 28 V","description":"\u003cp\u003eWhelen 7198517 (P\/N 01-0771985-17) is the flasher assembly that drives a Whelen 7198700 white LED wingtip anti-collision light, approved to TSO-C96a Class III. It runs on 28 V DC (21–32 V DC), draws 0.3 A on average with 1.7 A pulses and produces 45 ± 5 flash bursts per minute. It weighs 0.48 lb (218 g) and measures 100 × 79 × 35 mm.\u003c\/p\u003e\u003cp\u003ePower enters through a 7 in input cable (white +28 V, black ground with #10 ring terminal); the light connects to the 2 × 2 Mini Universal Mate-N-Lok output. The flasher must not be connected to a xenon strobe light. An approved system uses two flashers and two 7198700 lights, one pair per wingtip.\u003c\/p\u003e\u003cp\u003eWhelen holds an FAA PMA for 01-0771985-17 as a replacement for the Whelen strobe power supply 01-0770006-17 on the Cessna 172R, 172S, 182S, 182T, T182T, 206H and T206H. Replacing the 7000617 power supply or the 7081800 strobe light needs both the 7198517 and the 7198700. For an EASA-registered aircraft, acceptance of the PMA part for the type is confirmed before installation, and the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft model, the serial number and the strobe parts being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685608779,"sku":"01-0771985-17","price":8303.91,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771985-17.jpg?v=1790591872"},{"product_id":"7198700","title":"Whelen 7198700 White LED Wingtip Anti-Collision Light","description":"\u003cp\u003eWhelen 7198700 (P\/N 01-0771987-00) is a white LED anti-collision light for wingtip mounting, approved to TSO-C96a Class III. Three banks of seven LEDs are covered by a clear hard-coated lens; the light measures 81 × 36 × 30 mm and weighs 0.14 lb (64 g).\u003c\/p\u003e\u003cp\u003eEach light is driven by its own Whelen 7198517 flasher assembly on 28 V DC and connects to it through 14 in 20 AWG leads with a 2 × 2 Mini Universal Mate-N-Lok connector. It must not be connected to a xenon strobe power supply. An approved system uses two lights, one on each wingtip. If more than one LED per bank or a whole bank fails, the flasher is checked first, then the light is replaced.\u003c\/p\u003e\u003cp\u003eWhelen holds an FAA PMA for 01-0771987-00 as a replacement for the Whelen strobe light 01-0770818-00 on the Cessna 172R, 172S, 182S, 182T, T182T, 206H and T206H. Replacing the 7081800 strobe light or the 7000617 power supply needs both the 7198700 and the 7198517. For an EASA-registered aircraft, acceptance of the PMA part for the type is confirmed before installation, and the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft model, the serial number and the strobe parts being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685674315,"sku":"01-0771987-00","price":8619.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0771987-00.jpg?v=1790591900"},{"product_id":"or36r2n","title":"Whelen OR36R2N","description":"\u003cp\u003eWhelen Orion 360 OR36R2N (P\/N 01-0772010-10) is a red LED anti-collision beacon for 28 V DC with a 2.6 in (66 mm) upper base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.26 A on average and 1.4 A peak, and weighs 0.3 lb (about 136 g).\u003c\/p\u003e\u003cp\u003eThe light has 20 red LEDs and is 1.60 in (41 mm) high. Two 18 AWG leads to MIL-W-22759\/34, 12 in long, carry +28 V DC (white) and ground (black). The light assembly is secured with Allen screws to a mounting adapter; Whelen gives hole patterns with four #6-32 holes on a 1.625 in or 1.250 in bolt circle. The red 3.67 in (93 mm) versions are OR36R2W (upper) and OR36R2WL (lower); the 14 V red version with the 2.6 in base is OR36R1N.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685707083,"sku":"01-0772010-10","price":14474.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-10.jpg?v=1791618490"},{"product_id":"or36r2w","title":"Whelen OR36R2W","description":"\u003cp\u003eWhelen Orion 360 OR36R2W (P\/N 01-0772010-12) is a red LED anti-collision beacon for 28 V DC, upper mount, with a 3.67 in (93 mm) base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.26 A on average and 1.4 A peak, and weighs 0.37 lb (about 168 g).\u003c\/p\u003e\u003cp\u003eThe light has 20 red LEDs and is 2.83 in (72 mm) high; the Whelen model table lists this size as the 3.75 in base. Two 18 AWG leads to MIL-W-22759\/34, 10 in long, carry +28 V DC (white) and ground (black). Whelen gives a suggested pattern of three #6-32 mounting holes. The lower-mount version is OR36R2WL, the 14 V version is OR36R1W and the version with the 2.6 in (66 mm) base is OR36R2N.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685772619,"sku":"01-0772010-12","price":15248.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-12.jpg?v=1790591918"},{"product_id":"or36r2wl","title":"Whelen OR36R2WL","description":"\u003cp\u003eWhelen Orion 360 OR36R2WL (P\/N 01-0772010-13) is a red LED anti-collision beacon for 28 V DC, lower mount, with a 3.67 in (93 mm) base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.26 A on average and 1.4 A peak, and weighs 0.37 lb (about 168 g).\u003c\/p\u003e\u003cp\u003eThe light has 20 red LEDs and is 2.83 in (72 mm) high; the Whelen model table lists this size as the 3.75 in base. Two 18 AWG leads to MIL-W-22759\/34, 10 in long, carry +28 V DC (white) and ground (black). Whelen gives a suggested pattern of three #6-32 mounting holes; the lower-mount version has a cap with a drain hole. The upper-mount version is OR36R2W; the white lower-mount version is OR36W2WL.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685870923,"sku":"01-0772010-13","price":15248.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-13.jpg?v=1790591935"},{"product_id":"or36w2wl","title":"Whelen OR36W2WL","description":"\u003cp\u003eWhelen Orion 360 OR36W2WL (P\/N 01-0772010-23) is a white LED anti-collision beacon for 28 V DC, lower mount, with a 3.67 in (93 mm) base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.26 A on average and 1.4 A peak, and weighs 0.37 lb (about 168 g).\u003c\/p\u003e\u003cp\u003eThe light has 16 white LEDs and is 2.83 in (72 mm) high; the Whelen model table lists this size as the 3.75 in base. Two 18 AWG leads to MIL-W-22759\/34, 10 in long, carry +28 V DC (white) and ground (black). Whelen gives a suggested pattern of three #6-32 mounting holes; the lower-mount version has a cap with a drain hole. The white upper-mount version is OR36W2W; the red lower-mount version is OR36R2WL.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685903691,"sku":"01-0772010-23","price":15248.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-23.jpg?v=1790591940"},{"product_id":"or36r1n","title":"Whelen OR36R1N","description":"\u003cp\u003eWhelen Orion 360 OR36R1N (P\/N 01-0772010-50) is a red LED anti-collision beacon for 14 V DC with a 2.6 in (66 mm) upper base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.53 A on average and 2.8 A peak, and weighs 0.3 lb (about 136 g).\u003c\/p\u003e\u003cp\u003eThe light has 20 red LEDs and is 1.60 in (41 mm) high. Two 18 AWG leads to MIL-W-22759\/34, 12 in long, carry +14 V DC (red) and ground (black). Whelen gives mounting patterns with four #6-32 holes on a 1.625 in bolt circle or two #6-32 or #8-32 holes on a 1.250 in bolt circle. The 28 V version with the same base is OR36R2N, the 14 V version with the 3.67 in (93 mm) base OR36R1W.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181685936459,"sku":"01-0772010-50","price":14474.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-50.jpg?v=1790591962"},{"product_id":"or36r1w","title":"Whelen OR36R1W","description":"\u003cp\u003eWhelen Orion 360 OR36R1W (P\/N 01-0772010-52) is a red LED anti-collision beacon for 14 V DC, upper mount, with a 3.67 in (93 mm) base, approved to TSO-C96a Class III. It flashes 45 ± 4 times per minute, draws 0.53 A on average and 2.8 A peak, and weighs 0.37 lb (about 168 g).\u003c\/p\u003e\u003cp\u003eThe light has 20 red LEDs and is 2.83 in (72 mm) high; the Whelen model table lists this size as the 3.75 in base. Two 18 AWG leads to MIL-W-22759\/34, 10 in long, carry +14 V DC (red) and ground (black). Whelen gives a suggested pattern of three #6-32 mounting holes. The 28 V version with the same base is OR36R2W; the 14 V red version with the 2.6 in (66 mm) base is OR36R1N.\u003c\/p\u003e\u003cp\u003eWhelen states that the Orion 360 is not appropriate for rotorcraft. EASA STC 10052976, the EASA validation of FAA STC SA615EA, covers model OR36( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, with Whelen placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon base.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181686133067,"sku":"01-0772010-52","price":15248.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772010-52.jpg?v=1790591985"},{"product_id":"or5501v","title":"Whelen OR5501V","description":"\u003cp\u003eWhelen Orion 550 OR5501V (P\/N 01-0772070V01) is a 14 V DC LED tail light that combines the white tail position light and a white anti-collision light in one compact housing. Whelen lists TSO-C96a Class II and III and TSO-C30c Type III. The position light draws 0.2 A, the anti-collision light 0.72 A on average and 3.8 A peak, at 45 ± 5 flashes per minute; the installation guide gives a 10–14 V DC operating range.\u003c\/p\u003e\u003cp\u003eThe tail position light has 4 LEDs and the anti-collision light 18 LEDs; if any LED fails, the unit is repaired or replaced. The housing measures 48 × 44 × 55 mm and weighs 0.20 lb (about 90 g). A SYNC lead lets Whelen LED anti-collision lights flash together. Whelen cross-references OR5501V to the earlier A500AV14 and A555AV14; replacing an A555AV14 position light needs an additional 12\/14 V DC wire for the anti-collision function.\u003c\/p\u003e\u003cp\u003eThe light is mounted as far aft as practicable on a thermally conductive surface, drain hole down. Whelen lists no STC for the Orion 550. A certified aircraft needs an approved modification or approved data for the installation and a Certificate of Release to Service. Fit depends on the aircraft type and the existing tail light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181686296907,"sku":"01-0772070V01","price":10978.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0772070V01.jpg?v=1790592003"},{"product_id":"9052001","title":"Whelen 9052001 Red\/White LED Anti-Collision Beacon, 28 V","description":"\u003cp\u003eWhelen 9052001 (P\/N 01-0790520-01) is a red\/white LED anti-collision beacon of the 90520 series for 28 V DC with a 2.6 in (66 mm) A470A mount, approved to TSO-C96a Class III. It draws 0.45 A on average and 2.0 A peak for 0.3 s, weighs 0.65 lb (about 295 g), has an exposed height of 3.74 in (95 mm) and meets the anti-collision light requirement of 14 CFR 91.205(c)(3).\u003c\/p\u003e\u003cp\u003eThe split lighthead has 4 columns of 4 red LEDs, installed facing forward, and 4 columns of 3 white LEDs; if any one LED or column fails, the unit is repaired or replaced. Flying leads, 18 AWG and 12 in long, carry +28 V DC (white) and ground (black). The 14 V version with the same mount is 9052051.\u003c\/p\u003e\u003cp\u003eEASA STC 10052976, the EASA validation of FAA STC SA615EA, covers Whelen P\/N 01-0790520-( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, installed per Whelen manual 05131 Rev. E with placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon mount.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181687312715,"sku":"01-0790520-01","price":15561.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0790520-01.jpg?v=1790592150"},{"product_id":"9052018","title":"Whelen 9052018 Red\/White LED Anti-Collision Beacon, Lower Mount, 28 V","description":"\u003cp\u003eWhelen 9052018 (P\/N 01-0790520-18) is a 90520-series red\/white LED anti-collision beacon for lower fuselage mounting on 28 V DC aircraft, approved to TSO-C96a Class III. It draws 0.45 A on average with 2.0 A pulses and weighs 0.8 lb (363 g). Four columns of four red LEDs and four columns of three white LEDs sit under a clear polycarbonate lens, with the red LEDs facing forward.\u003c\/p\u003e\u003cp\u003ePower is connected through an MS3102R10SL-3P connector (pin A +28 V DC, pin C ground). The light fits the 5-hole pattern on a 4.656 in (118 mm) bolt circle used by the Whelen 70285, 7090501 and 70900 beacons with the A440 adapter. A lower-mounted unit needs the flasher base waterproofed to the aircraft. If any LED or LED column fails, the unit is repaired or replaced; Whelen specifies an annual inspection.\u003c\/p\u003e\u003cp\u003eEASA STC 10052976 (aeroplanes) and 10053536 (rotorcraft), both based on FAA STC SA615EA, cover Whelen P\/N 01-0790520-( ) as a replacement for the originally installed anti-collision lights on the types in their approved model lists (manual 05131 Rev. E, placard A421). After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the beacon being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181687345483,"sku":"01-0790520-18","price":17084.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0790520-18.jpg?v=1791620169"},{"product_id":"9052051","title":"Whelen 9052051 Red\/White LED Anti-Collision Beacon, 14 V","description":"\u003cp\u003eWhelen 9052051 (P\/N 01-0790520-51) is a red\/white LED anti-collision beacon of the 90520 series for 14 V DC with a 2.6 in (66 mm) A470A mount, approved to TSO-C96a Class III. It draws 0.90 A on average and 4.0 A peak for 0.3 s, weighs 0.65 lb (about 295 g), has an exposed height of 3.74 in (95 mm) and meets the anti-collision light requirement of 14 CFR 91.205(c)(3).\u003c\/p\u003e\u003cp\u003eThe split lighthead has 4 columns of 4 red LEDs, installed facing forward, and 4 columns of 3 white LEDs; if any one LED or column fails, the unit is repaired or replaced. Power enters through an AMP 1-480319-0 (Mate-N-Lock) connector on 5.5 in, 20 AWG leads: pin 1 +14 V DC (red), pin 2 ground (black). The 28 V version with the same mount is 9052001.\u003c\/p\u003e\u003cp\u003eEASA STC 10052976, the EASA validation of FAA STC SA615EA, covers Whelen P\/N 01-0790520-( ) as a replacement for the originally installed anti-collision light on the aeroplane types in its approved model list, installed per Whelen manual 05131 Rev. E with placard A421. After installation the aircraft is released to service with a Certificate of Release to Service. Fit depends on the aircraft type and the existing beacon mount.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181687542091,"sku":"01-0790520-51","price":15561.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0790520-51.jpg?v=1790592167"},{"product_id":"9072414","title":"Whelen 9072414 LED Anti-Collision Beacon, Rudder Mount","description":"\u003cp\u003eWhelen Aerospace Technologies 9072414 (P\/N 01-0790724-14) is a red LED anti-collision beacon for a 5-hole rudder mount, the 90724-series version that Whelen lists for Baron aircraft. It runs on 28 V DC (22–32 V DC), draws 0.3 A on average with 1.6 A pulses, flashes at 45 ± 5 flashes per minute and is approved to FAA TSO-C96a Class III. The assembly weighs 2.25 lb (1.02 kg).\u003c\/p\u003e\u003cp\u003eThe light source is six vertical columns of six LEDs under a clear lens. The 90724 series replaces the Whelen 90044 quartz-halogen flashing beacons; Whelen cross-references this version to 01-0790044-57 and 01-0790088-14. Power is connected through an 18 in (457 mm) shielded two-conductor cable pigtail. The unit measures 9.88 × 2.38 × 2.70 in (251 × 60 × 69 mm).\u003c\/p\u003e\u003cp\u003eIf any one LED fails, the unit must be repaired or replaced; Whelen specifies an annual inspection unless the aircraft manufacturer sets a shorter interval. Whelen states that the TSO article needs separate approval for installation; on an EASA-registered aircraft that means approved data for the type and a Certificate of Release to Service after installation. Fit depends on the aircraft type and the P\/N of the beacon being replaced.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181687771467,"sku":"01-0790724-14","price":30494.6,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-0790724-14.jpg?v=1790588204"},{"product_id":"aeroleds-01-1096","title":"AeroLEDs 01-1096 Twist Mount Kit for SunBeacon II","description":"\u003cp\u003eAeroLEDs 01-1096 is the twist mount kit for the AeroLEDs SunBeacon II LED anti-collision beacon, in red or white and for 14 V or 28 V (11-2200-A-12, -A-24, -B-12, -B-24). AeroLEDs lists it as an optional accessory next to the 3.75 in adapter mount cup KIT-0049. In the AeroLEDs installation instructions 0012-0005 the twist mount is mounting configuration B; configuration A fixes the beacon directly with two 6-32 screws. The beacon is ordered separately.\u003c\/p\u003e\u003cp\u003eThe beacon installation is an approved modification: for aircraft types listed on FAA AML SA04837NY, EASA STC 10085098 is the approval path, and the work ends with a Certificate of Release to Service. Fit depends on the aircraft type and the SunBeacon II P\/N.\u003c\/p\u003e","brand":"AeroLEDS","offers":[{"title":"Default Title","offer_id":58181691146571,"sku":"01-1096","price":1380.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/aeroleds-01-1096.png?v=1790512310"},{"product_id":"suntail-550-exp-experimental","title":"AeroLEDs SunTail 550 EXP Experimental LED Tail Position and Anti-Collision Light, 14 V","description":"\u003cp\u003eAeroLEDs SunTail 550 EXP (P\/N 01-1360-12) is an LED tail light for experimental aircraft with a 14 V DC electrical system that combines a white aft position light and a white anti-collision strobe in one unit. AeroLEDs supplies it for experimental and special use only: it holds no FAA approval, is not approved for certified aircraft and is not recommended for night flight. AeroLEDs states that its performance meets TSO-C30c Type III and TSO-C96a Class II.\u003c\/p\u003e\u003cp\u003eThe light runs on 9–15 V DC and draws 0.35 A for the position light and 0.4 A average (2.35 A peak) for the strobe, which flashes 41 times per minute without an external power supply. It synchronizes with AeroLEDs experimental wingtip anti-collision lights. It measures 56 × 43 × 25 mm and weighs 51 g. AeroLEDs lists it as the replacement for the earlier 14 V P\/Ns 01-0770024-00 (A500AV14) and 01-0770034-00 (A555AV14); some of them need extra wiring for the anti-collision function. The 28 V version is 01-1360-24.\u003c\/p\u003e\u003cp\u003eThe light mounts vertically with two 4-40 screws; horizontal mounting needs KIT-0064, sold separately. It connects only to aircraft wiring: a high-voltage strobe power supply damages it. Fit depends on the aircraft type and the existing tail light.\u003c\/p\u003e","brand":"AeroLEDS","offers":[{"title":"Default Title","offer_id":58181691769163,"sku":"01-1360-12","price":8999.3,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-1360-12.jpg?v=1790591373"},{"product_id":"blaze1rg-1","title":"Whelen BLAZE1RG Red\/Green LED Wingtip Position\/Strobe Light Pair, 01-95001-03","description":"\u003cp\u003eWhelen BLAZE1RG (P\/N 01-95001-03) is a red and green pair of all-LED wingtip lights for experimental and Light Sport Aircraft. Each assembly combines a forward position light, a white tail position light and an anti-collision strobe. The pair consists of the BLAZE1R (01-95001-01) and the BLAZE1G (01-95001-02).\u003c\/p\u003e\u003cp\u003eThe lights operate on 14 V DC, within an 11–16 V range. At 14 V the position light draws 0.40 A and the strobe 2.15 A peak, flashing 45 ± 5 times per minute. Each assembly measures 115.5 × 33.9 × 28.5 mm, is fitted with two #6-32 (M3) fasteners and has 8 in leads for ground, position, strobe and SYNC. Joining the yellow SYNC wires of two lights makes them flash together. The lenses are hard-coated polycarbonate; the black Stealth versions STBLZR and STBLZG are separate part numbers.\u003c\/p\u003e\u003cp\u003eWhelen marks the BLAZE series for experimental use only and not TSO approved. It is not FAA approved or certified for installation on certified aircraft and is not recommended for night flight operations. Fit depends on the aircraft type and the electrical system voltage.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181697601867,"sku":"01-95001-03","price":11520.2,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/01-95001-03.jpg?v=1790592273"},{"product_id":"a444","title":"Whelen A444 2-Position Male AMP Connector Kit with Pins","description":"\u003cp\u003eWhelen A444, P\/N 02-0230007-00, is an AMP connector kit with a 2-position male connector and pins. Whelen Aerospace Technologies lists it among its aircraft replacement connector kits, next to the matching 2-position female kit A446 (02-0230085-00) with sockets, the 3- and 4-position kits A441, A442, A447 and A448, and the CRIMPAV AMP crimp tool.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181832245579,"sku":"02-0230007-00","price":500.4,"currency_code":"CZK","in_stock":true}]},{"product_id":"a446","title":"Whelen A446 2-Position Female AMP Connector Kit with Sockets","description":"\u003cp\u003eWhelen A446, P\/N 02-0230085-00, is an AMP connector kit with a 2-position female connector and sockets. Whelen Aerospace Technologies lists it among its aircraft replacement connector kits, next to the matching 2-position male kit A444 (02-0230007-00) with pins, the 3- and 4-position kits A441, A442, A447 and A448, and the CRIMPAV AMP crimp tool.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181832343883,"sku":"02-0230085-00","price":500.4,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/022-02-0230085-00.jpg?v=1791814380"},{"product_id":"a610","title":"Whelen A610 Flash Tube Assembly","description":"\u003cp\u003eWhelen A610 (P\/N 02-0250276-00) is a replacement strobe flash tube assembly, the standard version with 6 in leads, weighing 0.09 lb (41 g). Whelen lists it in the parts lists of the A600 series wingtip strobe and position lights and the A650 series strobe assemblies, and pairs it with the A612 magnifying glass lens for wingtip strobes on single-engine Cessnas from 1972. Input current and voltage depend on the strobe power supply used. Related versions are the A610M (02-0250276-03) with a Molex connector and the long-lead 5027601 (02-0250276-01, 14 in) and 5027602 (02-0250276-02, 12½ in).\u003c\/p\u003e\u003cp\u003eLens, retainer and gasket are separate items in the Whelen parts lists, and the replacement follows Whelen manual 05131 Rev. E. After the tube is replaced, the aircraft is released with a Certificate of Release to Service. Fit depends on the model of the installed light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58181832442187,"sku":"02-0250276-00","price":3696.88,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/02-0250276-00.jpg?v=1790592289"},{"product_id":"aeroleds-pulsar-660-nsp","title":"AeroLEDs Pulsar 660 (NSP) LED Wingtip Position and Anti-Collision Light","description":"\u003cp\u003eThe AeroLEDs Pulsar 660 (NSP) is an LED wingtip light that combines a forward position light, a white aft position light and a white anti-collision strobe in one assembly. The left-hand light has a red forward position light, the right-hand light a green one. It is approved to TSO-C30c Type I, II and III and TSO-C96a Class II. In the FAA-approved drawing list AeroLEDs names the 11-1280-C series Pulsar NSP.\u003c\/p\u003e\u003cp\u003eThe 24 V versions are for 28 V DC aircraft and run on 18–30 V DC. The strobe flashes 41 times per minute with a 190 ms pulse and synchronises with other AeroLEDs anti-collision lights.\u003c\/p\u003e\u003cp\u003eThe light mounts on the supplied KIT-0008 bracket in the existing wingtip holes. An existing high-voltage strobe power supply is bypassed or removed; a xenon strobe power pack damages the light. For aircraft types listed on FAA AML SA04837NY, EASA STC 10085098 is the approval path. The right version depends on the wing side.\u003c\/p\u003e\u003ch3\u003eVersions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e24 V, Left – P\/N 11-1280-C-24-L\u003c\/li\u003e\n\u003cli\u003e24 V, Right – P\/N 11-1280-C-24-R\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AeroLEDS","offers":[{"title":"24 V \/ Left","offer_id":58867271074123,"sku":"11-1280-C-24-L","price":13761.7,"currency_code":"CZK","in_stock":true},{"title":"24 V \/ Right","offer_id":58182285263179,"sku":"11-1280-C-24-R","price":13761.7,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/11-1280-C-24-R.jpg?v=1790591726"},{"product_id":"w1282","title":"Whelen W1282 Lens Retainer for W1285 Series","description":"\u003cp\u003eWhelen W1282 (P\/N 19-150002-009) is the lens retainer of the Whelen W1285 series incandescent wingtip position lights: W1285PG1 and W1285PR1 for 14 V DC, W1285PG2 and W1285PR2 for 28 V DC. Whelen lists it in the W1285 parts breakdown together with the W1284G green and W1284R red lenses, the W1283 lens gasket, the W1285-2 base plate and the W1290-14 or W1290-28 lamps, all of which are separate items.\u003c\/p\u003e\u003cp\u003eWhen a W1285 light is converted with a Whelen A650 strobe assembly, the A650 replaces this retainer. Replacement follows Whelen manual 05131 Rev. E and ends with a Certificate of Release to Service. Fit depends on the model of the installed light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58182408667467,"sku":"19-150002-009","price":2643.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/19-150002-009.jpg?v=1792264745"},{"product_id":"a606","title":"Whelen A606 Lens Retainer for A600 Series","description":"\u003cp\u003eWhelen A606 (P\/N 19-170049-009) is the lens retainer of the Whelen A600 series wingtip strobe and position lights, including the A600-PG and A600-PR models and their radio-shielded D versions. Whelen lists it in the A600 replacement parts list together with the A605 base plate, the A610 flash tube, the A612 strobe lens, the W1284 red or green position light lens and the W1283 and A616 gaskets, all of which are separate items.\u003c\/p\u003e\u003cp\u003eReplacement follows Whelen manual 05131 Rev. E and ends with a Certificate of Release to Service. Fit depends on the model of the installed light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58182409191755,"sku":"19-170049-009","price":2683.5,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/077-19-170049-009.jpg?v=1791814494"},{"product_id":"a50828","title":"Whelen A50828 28 V Halogen Lamp for Tail Position Lights","description":"\u003cp\u003eWhelen A50828 (P\/N 34-0428070-64), also designated A508-28, is a 28 V, 25 W ESG halogen replacement lamp. Whelen lists it in the parts lists of the A500A tail position\/strobe lights, the A555A tail position lights and the A600 PG\/PR wingtip strobe and position lights. The 14 V counterpart is the A50814 (34-0412070-63).\u003c\/p\u003e\u003cp\u003eLens, gasket and socket are separate items in the Whelen parts lists. After the lamp is replaced, the aircraft is released with a Certificate of Release to Service. Fit depends on the model of the installed light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58182638436683,"sku":"34-0428070-64","price":1643.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/34-0428070-64.jpg?v=1792264753"},{"product_id":"5062601","title":"Whelen 5062601 Flash Tube Assembly","description":"\u003cp\u003eWhelen 5062601 (P\/N 36-0050626-01) is a replacement flash tube assembly with 6.00 in leads and a grommet. Whelen lists it as the strobe tube of the 71110 series strobe anti-collision \/ LED position lights (models 7111001 to 7111004, green or red, 14 V or 28 V, RFI shielded) and of the 90340 series wingtip strobe \/ LED position lights (9034001 green and 9034002 red, 14 V); each light uses one tube.\u003c\/p\u003e\u003cp\u003eLens, lens retainer and gaskets are separate items in the Whelen parts lists, and the replacement follows Whelen manual 05131 Rev. E. After the tube is replaced, the aircraft is released with a Certificate of Release to Service. Fit depends on the model of the installed light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58182640861515,"sku":"36-0050626-01","price":3696.88,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/36-0050626-01.jpg?v=1790592306"},{"product_id":"a402ar","title":"Whelen A402AR Red Lens Assembly","description":"\u003cp\u003eWhelen A402AR (P\/N 68-2170504-50) is a red, hard-coated replacement lens assembly for Whelen strobe lights. The Whelen illustrated spare parts catalog lists it for the A470A series remote strobe light, the 70509 series remote strobe light and the 70285 and HRCFA series self-contained anti-collision strobe lights. The same lens is listed as A402AW (68-2170504-30) in white and as A402AS (68-2170504-60) in split red\/white, and the RFI-shielded versions are A402ADR, A402ADW and A402ADS.\u003c\/p\u003e\u003cp\u003eThe 2.50 in clamp ring and the 2.5 in gasket are separate items in the Whelen parts lists. After the lens is replaced, the aircraft is released with a Certificate of Release to Service. Fit depends on the model of the installed light.\u003c\/p\u003e","brand":"Whelen Aerospace Technologies","offers":[{"title":"Default Title","offer_id":58183747371339,"sku":"68-2170504-50","price":2053.8,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/68-2170504-50.jpg?v=1791630844"},{"product_id":"micromax","title":"Aveo MicroMax LED Anti-Collision Light for UAV, Green","description":"\u003cp\u003eAveo MicroMax AVE-MMACSG-ENA is a green LED anti-collision light for drones and UAVs that weighs no more than 30 g and gives 360° coverage. It runs on 9–32 V DC, draws a peak of 0.56 A at 14 V or 0.28 A at 28 V (7.8 W peak), flashes 50 times per minute and stands 35 × 11 mm above the mounting surface.\u003c\/p\u003e\u003cp\u003eThree AWG 22 leads with Teflon insulation carry power (yellow), return (black) and synchronization (blue); they are at least 10 in (254 mm) long, and the light mounts with M3 screws. It has overheat and reverse-polarity protection, under- and over-voltage protection at 8.5 V and 33 V, and withstands 60 V spikes for 1 second. Aveo tested it to RTCA DO-160 for −40 to +85 °C. MicroMax is also made in red (AVE-MMACSR-ENA), white (AVE-MMACSW-ENA) and amber (AVE-MMACSA-ENA).\u003c\/p\u003e\u003cp\u003eAveo states that MicroMax is not a TSO-certified light and is not approved for installation on certified aircraft; Aveo lists it for UAVs and for LSA, experimental, UL and kit aircraft. Fit depends on the vehicle type.\u003c\/p\u003e","brand":"Aveo","offers":[{"title":"Green","offer_id":58184452833611,"sku":"AVE-MMACSG-ENA","price":11102.13,"currency_code":"CZK","in_stock":true},{"title":"Red","offer_id":58832226943307,"sku":"AVE-MMACSR-ENA","price":11102.13,"currency_code":"CZK","in_stock":true},{"title":"White","offer_id":58832226976075,"sku":"AVE-MMACSW-ENA","price":11102.13,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/AVE-MMACSG-ENA.jpg?v=1790591761"},{"product_id":"posistrobe-dv","title":"Aveo PosiStrobe DV UAV Position and Strobe Light","description":"\u003ch2\u003eAveo PosiStrobe DV\u003c\/h2\u003e\u003cp\u003ePosiStrobe DV rear position and strobe LED light for UAVs — Part number AVE-PSDVPSYW-D01.\u003c\/p\u003e\u003ch3\u003eHighlights\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePosiStrobe DV rear position and strobe LED light for UAVs — Part number AVE-PSDVPSYW-D01.\u003c\/li\u003e\n\u003cli\u003eExact identity: Aveo PosiStrobe DV\u003c\/li\u003e\n\u003cli\u003ePart number: AVE-PSDVPSYW-D01\u003c\/li\u003e\n\u003cli\u003eVerify the exact part number, variant, approved equipment or aircraft eligibility, installation data and required interfaces before ordering.\u003c\/li\u003e\n\u003cli\u003e34.6 × 27.6 × 20.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eExact identity\u003c\/h3\u003e\u003cp\u003eAveo PosiStrobe DV — AVE-PSDVPSYW-D01.\u003c\/p\u003e\u003ch3\u003ePurpose and selection\u003c\/h3\u003e\u003cp\u003ePosiStrobe DV rear position and strobe LED light for UAVs\u003c\/p\u003e\u003ch3\u003eCompatibility and installation\u003c\/h3\u003e\u003cp\u003eVerify the exact part number, variant, approved equipment or aircraft eligibility, installation data and required interfaces before ordering.\u003c\/p\u003e","brand":"Aveo","offers":[{"title":"Default Title","offer_id":58184453423435,"sku":"AVE-PSDVPSYW-D01","price":6984.9,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/aveo-ave-psdvpsyw-d01.jpg?v=1790534865"},{"product_id":"posistrobe-daylite","title":"Aveo PosiStrobe DayLite LED Rear Position\/Strobe Light, 14 V","description":"\u003cp\u003eAveo PosiStrobe DayLite AVE-PSPSYW-D01 Mod(1) is a 14 V LED tail light that combines a rear position light and a strobe in one housing 30 mm high. Aveo states that it is not a TSO certified light and is not approved for installation on certified aircraft. It runs on 9–18 V DC, measures 45.3 × 56 × 30 mm and weighs 67 g.\u003c\/p\u003e\u003cp\u003eThe position light draws 0.31 A at 14 V (4.3 W); the strobe draws 3.85 A peak (54 W) and flashes 48 times per minute. Aveo recommends a 5 A circuit breaker for each function. Four AWG 22 leads at least 254 mm (10 in) long carry position power (red), strobe power (yellow), ground (black) and synchronization (blue); no external power supply or strobe unit is needed. The light has overheat protection at +85 °C, reverse-polarity protection, under- and over-voltage lockouts at 9 V and 18 V and withstands 60 V transients for 2 s; Aveo rates it waterproof, dust-proof and vibration-proof for −55 to +85 °C. The 28 V version is AVE-PSPSYW-D02.\u003c\/p\u003e\u003cp\u003eAveo recommends M3 or #6-32 mounting screws. Fit depends on the aircraft type.\u003c\/p\u003e","brand":"Aveo","offers":[{"title":"Default Title","offer_id":58184453488971,"sku":"AVE-PSPSYW-D01-MOD-1","price":8255.52,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/AVE-PSPSYW-D01-MOD-1.jpg?v=1791613819"},{"product_id":"posistrobe-titania","title":"Aveo PosiStrobe Titania LED Tail Position and Strobe Light","description":"\u003cp\u003eAveo PosiStrobe Titania AVE-PSPSYW-T01 is a white LED tail light that combines a rear position light and an anti-collision strobe for rudder or tail mounting. EASA issued ETSO authorisation EASA.21O.10068603 for it to ETSO-C30d and ETSO-C96b. It runs on 9–36 V DC and weighs 98 g.\u003c\/p\u003e\u003cp\u003eThe position light draws 0.39 A at 14 V or 0.21 A at 28 V; the strobe draws 4.40 A at 14 V or 1.84 A at 28 V and flashes 48 times per minute. Four AWG 20 leads carry position power (red), strobe power (yellow), ground (black) and synchronization (blue). The light has overheat protection at +85 °C, reverse-polarity protection and under- and over-voltage lockouts at 9 V and 36 V, and withstands 60 V transients. Operating temperature is −55 to +85 °C. The light is sealed and cannot be opened; after damage or failure the complete unit is replaced.\u003c\/p\u003e\u003cp\u003eAveo intends the light for aircraft that need rear coverage beyond the wingtip lights. The ETSO authorisation is not an installation approval: a certified aircraft needs an approved modification or approved data and a Certificate of Release to Service. The light mounts with M3 × 16 DIN 7984 (1.0 Nm) or #6-32 × 5\/8 in low-profile stainless screws. Fit depends on the aircraft type and the existing tail light.\u003c\/p\u003e","brand":"Aveo","offers":[{"title":"Default Title","offer_id":58184453587275,"sku":"AVE-PSPSYW-T01","price":15178.41,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/AVE-PSPSYW-T01.jpg?v=1790591771"},{"product_id":"redbaron-combo-hisl","title":"Aveo RedBaron Combo HISL Red\/White LED Anti-Collision Light","description":"\u003cp\u003eAveo RedBaron Combo HISL (P\/N AVE-RBCRW-001) is a dual-colour red and white LED anti-collision light for 18–36 V DC that meets ETSO-C96a Classes I, II and III. It flashes 48 times per minute; input power at 28 V is 144 W in white and 72 W in red. The light measures 66 × 66 × 74.7 mm, weighs 440 g and operates from −55 to +85 °C.\u003c\/p\u003e\u003cp\u003eTwo switched leads select white or red mode. The light runs in one colour at a time; powering both modes together damages the unit. A blue sync lead synchronises the flashes of several RedBaron Combo lights. No separate strobe power supply is used, and existing strobe or beacon power supplies are removed before installation. An NTC circuit reduces current and brightness at high internal temperature, and the light has over-voltage and reverse-polarity protection.\u003c\/p\u003e\u003cp\u003eAveo specifies M5 × 70 mm stainless steel mounting screws at 1.5 Nm and two ferrite chokes on the leads close to the light base. Installation of the ETSO article needs separate approval: a certified aircraft needs an approved modification and a Certificate of Release to Service. The light is inspected annually or every 100 hours. Fit depends on the aircraft type and the existing anti-collision light installation.\u003c\/p\u003e","brand":"Aveo","offers":[{"title":"Default Title","offer_id":58184453652811,"sku":"AVE-RBCRW-001","price":104795.82,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/AVE-RBCRW-001.jpg?v=1790591774"},{"product_id":"redbaron-mini-nxt-red","title":"Aveo RedBaron Mini NXT Red","description":"\u003cp\u003eAveo RedBaron Mini NXT Red — red LED anti-collision light. Compact red strobe for non-certified installations where the stated voltage and approval boundary are acceptable.\u003c\/p\u003e\u003cp\u003ePart number: AVE-RBMXTACR-D01. Supply: 9–18 VDC. Dimensions: 58 × 58 × 33.8 mm. Weight: 70 g. Power: 28 W at 14 VDC. Approval: not TSO-approved for certified aircraft.\u003c\/p\u003e\u003cp\u003eCheck the exact part number, mating equipment, approved applicability and current manufacturer instructions before ordering or installation.\u003c\/p\u003e\u003cp\u003eOne Aveo RedBaron Mini NXT Red; no device, cable or additional installation hardware is included unless stated.\u003c\/p\u003e","brand":"Aveo","offers":[{"title":"Default Title","offer_id":58184453718347,"sku":"AVE-RBMXTACR-D01","price":9094.41,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/aveo-ave-rbmxtacr-d01.png?v=1790534871"},{"product_id":"redbaron-mini-nxt-white","title":"Aveo RedBaron Mini NXT LED Anti-Collision Light, White","description":"\u003cp\u003eAveo RedBaron Mini NXT AVE-RBMXTACW-D01 is a white LED anti-collision light 33.8 mm high. Aveo states that it is not a TSO certified light and is not approved for installation on certified aircraft. It runs on 9–18 V DC, measures 58 × 58 × 33.8 mm and weighs 70 g.\u003c\/p\u003e\u003cp\u003eThe light draws 2 A at 14 V (28 W) and flashes 50 times per minute. It is wired with strobe power (yellow), return (black) and a synchronization line (blue). It has overheat protection at +85 °C, reverse-polarity protection, an under-voltage lockout at 7.5 V and an over-voltage lockout at 19.9 V, and withstands 80 V transients; Aveo rates it waterproof, dust-proof and vibration-proof for −55 to +85 °C. The red version is AVE-RBMXTACR-D01.\u003c\/p\u003e\u003cp\u003eFit depends on the aircraft type.\u003c\/p\u003e","brand":"Aveo","offers":[{"title":"Default Title","offer_id":58184453816651,"sku":"AVE-RBMXTACW-D01","price":9094.41,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/aveo-ave-rbmxtacw-d01.png?v=1790534879"},{"product_id":"gliderburst-daylite","title":"Aveo GliderBurst DayLite","description":"\u003cp\u003eAveo GliderBurst DayLite — pair of white wingtip LED strobe lights. Provides 180-degree white strobe coverage per side; this SKU is the pair configuration.\u003c\/p\u003e\u003cp\u003ePart number: AVE-WLSOEA-20D. Supply: 9–36 VDC. Dimensions: 115 × 33 × 26 mm each. Weight: 70 g each. Power: 24 W peak each. Approval: check aircraft approval.\u003c\/p\u003e\u003cp\u003eCheck the exact part number, mating equipment, approved applicability and current manufacturer instructions before ordering or installation.\u003c\/p\u003e\u003cp\u003eOne Aveo GliderBurst DayLite; no device, cable or additional installation hardware is included unless stated.\u003c\/p\u003e","brand":"Aveo","offers":[{"title":"Default Title","offer_id":58184454635851,"sku":"AVE-WLSOEA-20D","price":11275.26,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/aveo-ave-wlsoea-20d.jpg?v=1790534842"},{"product_id":"aveo-ultra-embedded-galactica","title":"Aveo Ultra Galactica Embedded LED Navigation\/Strobe Light","description":"\u003cp\u003eAveo Ultra Galactica Embedded is an LED wingtip light that combines a navigation (position) light and an anti-collision strobe in one housing. It is approved to ETSO-C30c and ETSO-C96a and qualified to DO-160G. The light runs on 9–36 V DC, measures 100 × 46.2 × 34.1 mm and weighs 103 g.\u003c\/p\u003e\u003cp\u003eThe strobe flashes 50 times per minute from built-in electronics, so no external power supply or strobe unit is needed. Four leads carry position power, strobe power, ground and synchronization; joining the synchronization leads makes all lights flash together. The light has 26 LEDs, overheat and reverse-polarity protection and under- and over-voltage lockouts at 9 V and 36 V. Installation requires separate approval: a certified aircraft needs an approved modification or approved data and a Certificate of Release to Service. The right version depends on the position color needed on the wingtip.\u003c\/p\u003e\u003ch3\u003eVersions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRed – P\/N AVE-WPSR-64G\u003c\/li\u003e\n\u003cli\u003eGreen – P\/N AVE-WPSG-64G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aveo","offers":[{"title":"Green","offer_id":58866566594891,"sku":"AVE-WPSG-64G","price":16743.38,"currency_code":"CZK","in_stock":true},{"title":"Red","offer_id":58184454897995,"sku":"AVE-WPSR-64G","price":16215.06,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/258-AVE-WPSR-64G.jpg?v=1791814871"},{"product_id":"aveo-ultra-embedded-daylite","title":"Aveo Ultra Embedded DayLite LED Navigation\/Strobe Light","description":"\u003cp\u003eThe Aveo Ultra Embedded DayLite is an LED light that combines a navigation (position) light and a strobe in one housing. It runs on 9–36 V DC, measures 100 × 46.2 × 34.1 mm, weighs 103 g and flashes 50 times per minute.\u003c\/p\u003e\u003cp\u003eFour leads with Teflon insulation, at least 10 in (254 mm) long, carry position power (red), strobe power (yellow), ground (black) and synchronization (blue). The light has overheat protection at +85 °C, reverse-polarity, under- and over-voltage protection, and operates from −55 to +85 °C. It mounts only with the supplied M5 × 45 DIN 7984 screws, tightened to 1.2 Nm.\u003c\/p\u003e\u003cp\u003eAveo states that the Ultra Embedded DayLite is not a TSO\/ETSO-certified light and is not approved for installation on certified aircraft. Fit depends on the aircraft type and the existing lights.\u003c\/p\u003e\u003ch3\u003eVersions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGreen – P\/N AVE-WPSG-64T\u003c\/li\u003e\n\u003cli\u003eRed – P\/N AVE-WPSR-64T\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aveo","offers":[{"title":"Green","offer_id":58866557288779,"sku":"AVE-WPSG-64T","price":12089.61,"currency_code":"CZK","in_stock":true},{"title":"Red","offer_id":58184454930763,"sku":"AVE-WPSR-64T","price":11258.1,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/AVE-WPSR-64T.jpg?v=1790591786"},{"product_id":"powerburst-nxt","title":"Aveo PowerBurst NXT 3-in-1 LED Navigation\/Position\/Strobe Light","description":"\u003cp\u003eThe Aveo PowerBurst NXT is a wingtip light that combines a navigation light, a rear white position light and a strobe in one housing. The navigation light is green or red. The gasket is black, white or red, depending on the variant.\u003c\/p\u003e\n\u003cp\u003eIt runs on 9–18 V DC, measures 115.3 × 33.2 × 27.5 mm and weighs 64 g. At 14 V the navigation and position light draws 0.22 A (3.1 W) and the strobe 1.8 A peak (25.2 W peak) at 50 flashes per minute. Separate leads carry navigation\/position power (red), strobe power (yellow), ground (black) and a synchronisation line (blue) to the light on the other wing. The light has overheat and reverse-polarity protection, is waterproof, dust-proof and vibration-proof, and operates from −40 to +85 °C. It mounts with M3 DIN 7984 screws at 0.5 Nm on two holes 95 mm apart.\u003c\/p\u003e\n\u003cp\u003ePart numbers are AVE-WPSTG-20D (green, black gasket), AVE-WPSTG-2WD (green, white gasket), AVE-WPSTR-20D (red, black gasket), AVE-WPSTR-2RD (red, red gasket) and AVE-WPSTR-2WD (red, white gasket). Aveo states that the PowerBurst NXT is not a TSO-certified light and is not approved for installation on certified aircraft. Fit depends on the aircraft type.\u003c\/p\u003e","brand":"Aveo","offers":[{"title":"None \/ Green","offer_id":58184455029067,"sku":"AVE-WPSTG-20D","price":7025.4,"currency_code":"CZK","in_stock":true},{"title":"White \/ Green","offer_id":58832293232971,"sku":"AVE-WPSTG-2WD","price":7025.4,"currency_code":"CZK","in_stock":true},{"title":"None \/ Red","offer_id":58853528895819,"sku":"AVE-WPSTR-20D","price":7025.4,"currency_code":"CZK","in_stock":true},{"title":"Red \/ Red","offer_id":58853529059659,"sku":"AVE-WPSTR-2RD","price":7353.45,"currency_code":"CZK","in_stock":true},{"title":"White \/ Red","offer_id":58853529223499,"sku":"AVE-WPSTR-2WD","price":7025.4,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/AVE-WPSTR-2RD_9e5b70be-7c18-4ad2-843f-5ba32b4f397a.jpg?v=1792065924"},{"product_id":"ultradaylite-nxt","title":"Aveo Ultra DayLite NXT LED Navigation\/Position\/Strobe Light, Green","description":"\u003cp\u003eAveo Ultra DayLite NXT AVE-WPSTG-65D is the green LED wingtip light that combines navigation\/position and strobe functions in one housing. Aveo states that it is not a TSO\/ETSO certified light and is not approved for installation on certified aircraft. It runs on 9–18 V DC, measures 100 × 46.2 × 35.6 mm and weighs 92 g.\u003c\/p\u003e\u003cp\u003eAt 14 V the position light draws 0.25 A (3.4 W) and the strobe 2.32 A (32.5 W). Four leads at least 254 mm (10 in) long carry position power (red, AWG 20), strobe power (yellow, AWG 20), common ground (black, AWG 20) and synchronization (blue, AWG 22). The operating temperature range is −55 to +85 °C. The red version is AVE-WPSTR-65D.\u003c\/p\u003e\u003cp\u003eAveo specifies stainless M5 × 45 DIN 7984 screws with a 4.8 × 1.9 DIN 3771 O-ring, or #10-32 × 1-3\/4 in socket-head screws with a 901 O-ring, tightened to 1.2 Nm.\u003c\/p\u003e","brand":"Aveo","offers":[{"title":"Red","offer_id":58184455291211,"sku":"AVE-WPSTR-65D","price":8668.53,"currency_code":"CZK","in_stock":true},{"title":"Green","offer_id":58832239427915,"sku":"AVE-WPSTG-65D","price":8668.53,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/files\/259-AVE-WPSTG-65D.jpg?v=1791814873"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1055\/1063\/3803\/collections\/category-parts-lighting.jpg?v=1791640539","url":"https:\/\/shop.airteam.eu\/collections\/parts-lighting.oembed","provider":"AIR TEAM","version":"1.0","type":"link"}