Kannad BAT300 Battery for ELT

Kannad KIT BAT300 battery kit S1820516-99 with the BAT300 lithium manganese dioxide pack S1820506-01, listed by Kannad for the 406 AP, AP-H, AF, AF-H, AS TNC and Survival ELTs.

View full details →
lithium content per kit
10.5 g
net quantity per kit
0.350 kg
LiMnO2 cells in the pack
3 × D-size
expiry from cell manufacture
7 years
All specifications →
SKU
S1820516-99
Cert
EASA
Condition
New
In stockShips within 1 business day
Regular price 37.712,55 Kč incl. VAT
31.167,40 Kč excl. VAT

plus shipping

  • Certified parts with full documentation
  • DHL delivery to 50+ countries
  • Expert product support
Have a question about this product? Contact us

Kannad S1820516-99 BAT300 Battery Kit for 406 ELT

Kannad S1820516-99 is the KIT BAT300 battery kit for Kannad 406 emergency locator transmitters. It holds the BAT300 battery pack S1820506-01, three D-size lithium manganese dioxide cells with 10.5 g of lithium and a net quantity of 0.350 kg. Kannad lists the pack for the 406 AP, AP-H, AF, AF-H, AS TNC and Survival ELTs.

  • KIT BAT300 holds the BAT300 battery pack S1820506-01: three D-size lithium manganese dioxide cells in a heat-shrink sleeve.

  • Kannad gives the lithium content as 10.5 g and the net quantity as 0.350 kg for the kit.

  • The pack has red and black wires with a connector; the kit also holds the connector pins and plugs for the current measurement test model.

  • Each kit comes with a new identification label; the battery P/N and expiry date are written on it after every replacement.

  • The pack expires 7 years after the cell manufacturing date; Kannad also calls for replacement after more than 1 hour of 406 MHz transmission.

Kit contents

Kannad's illustrated parts list for the 406 ELT (component maintenance manual 25-63-05) shows KIT BAT300 with the battery pack, an identification label, a desiccant capsule, one large and two small foam wedges, an O-ring, and the connector pins and plugs of the current measurement test model. The wires of the test model are not part of the kit.

The list names two pack numbers, S1820506-01 and S1820506-02. Kannad's safety data sheet names S1820506-01 as the pack in the kit.

ELT models

Kannad's safety data sheet DOC16006 (index E) lists the BAT300 pack S1820506-01 for six ELTs: 406 AP S1820502-02, 406 AP-H S1820502-04, 406 AF S1821502-02, 406 AF-H S1822502-02, 406 AS TNC S1823502-03 and 406 Survival S1823502-05.

Replacement

Kannad's manual 25-63-05 describes level 2 maintenance of the 406 ELT as battery replacement only, done in workshops with special tools and test benches. The pack is replaced at its expiry date, after more than 1 hour of 406 MHz transmission (burst counter above 72), after more than 350 self-tests, or when its operational life is in doubt.

After the swap the battery P/N and expiry date go on the new identification label, a new O-ring goes into the lower cover, and a self-test with an antenna or a 50 Ω load connected is followed by a current measurement before the cover is closed.

Lithium battery handling

The pack is a non-rechargeable lithium battery and must not be recharged. Kannad's manual calls for a special recycling procedure for used lithium batteries under local rules, so the old pack is not thrown away.

The kit ships as UN3090 lithium metal batteries, class 9, packing group II. Kannad gives IATA packing instruction 968 Section IA for air and P903 for road and sea.

Can't find the right part?

Our parts specialists will find hard-to-get components, check that a part suits your aircraft and arrange exchange units.

  • Hard-to-find and obsolete parts
  • A check that the part fits your aircraft, with the right paperwork
  • Exchange and overhauled units

Send us your question using the form. We will reply by e-mail.